nuttx

a1x

Based on the last PR, review all serial driver vector attachment. Found one additional error and updated all relevant drivers to current interrupt parameter passing.

2017-06-12 06:22:35 -06:00

arm

Squashed commit of the following:

2017-10-09 13:11:17 -06:00

armv6-m

Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU

2017-05-13 13:28:15 -06:00

armv7-a

arch/: Remove dangling space at the end of lines.

2017-06-28 13:16:48 -06:00

armv7-m

ARM syscall logic: Clear bit 0 in PC settings. Bit 0 is the thumb mode indication and should not be set in the PC.

2017-08-30 13:56:03 -06:00

armv7-r

Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU

2017-05-13 13:28:15 -06:00

bcm2708

BCM2708: The PiZero configuration now compiles and links cleanly. Still a few thngs missing internally.

2017-10-18 14:07:52 -06:00

c5471

net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.

2017-04-22 11:10:30 -06:00

common

arch/arm/common/up_checkstack: fix assert panic when both TLS and interrupt stack are enable

2017-10-23 12:02:20 -06:00

dm320

Convert some serial drivers to use use irq_attach.

2017-02-27 08:55:21 -06:00

efm32

fs/procfs/fs_procfsprogrem: Add /proc/progmem. This is an alternative way to get the information that was previoulsy available in apps/system/free. apps/system/free was removed beause it made illegal calls into the OS violating the portable interface. This new procfs entry provides the same information with no such violation.

2017-11-13 09:08:39 -06:00

imx1

Squashed commit of the following:

2017-10-04 15:22:27 -06:00

imx6

Fix a few places where there was a semicolon following the 'if' condition, makeing the following logic unconditional.

2017-10-10 14:24:13 -06:00

kinetis

Merged in juniskane/nuttx_stm32l4/stm32_rtc_small_patches_pr (pull request #511 )

2017-10-17 16:45:48 +00:00

kl

Correct recurring typo: semaphore not semapore

2017-10-09 09:57:56 -06:00

lc823450

Merged in masayuki2009/nuttx.nuttx/lc823450_autoled (pull request #532 )

2017-11-09 11:36:33 +00:00

lpc11xx

drivers/serial/tcdrain: tcdrain() was recently added to the NuttX C library. But there is a problem. The specification of tcdrain() requires that it be a cancellation point. In order to do this, tcdrain was moved from the C library into the OS and the addition cancellation point hooks were added. In non-FLAT builds, access via system calls is also now supported.

2017-10-06 10:55:36 -06:00

lpc17xx

Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep().

2017-10-06 10:15:01 -06:00

lpc31xx

Squashed commit of the following:

2017-10-09 13:11:17 -06:00

lpc43xx

lpc43xx Ethernet: Fix some backward logic setting full-duplex and 100mbps when autoconfiguration is disabled. Noted by Anonymous in Issue #76

2017-11-06 13:28:29 -06:00

lpc214x

Convert remaining serial drivers to use use irq_attach.

2017-02-27 10:27:14 -06:00

lpc2378

Squashed commit of the following:

2017-10-04 15:22:27 -06:00

moxart

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

nuc1xx

Eliminate some warnings found in build testing.

2017-08-13 12:24:48 -06:00

sam34

Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep().

2017-10-06 10:15:01 -06:00

sama5

SAMA5/SAMv7: It is necessary to disable pre-emption and interrupts around a loop that copies TX data into the hardware in order to avoid a TX data underrun condition.

2017-11-13 10:38:23 -06:00

samdl

sched/semaphore: sem_timedwait() is a cancellation point and, hence, cannot be called from within the OS. Created nxsem_timedwait() that is equivalent but does not modify the errno and does not cause cancellation. All calls to sem_timedwait() change to calls to nxsem_timedwait() in the OS.

2017-10-05 07:24:54 -06:00

samv7

SAMA5/SAMv7: It is necessary to disable pre-emption and interrupts around a loop that copies TX data into the hardware in order to avoid a TX data underrun condition.

2017-11-13 10:38:23 -06:00

stm32

Minor cleanup of some spacing.

2017-11-13 14:06:03 -06:00

stm32f0

Merged in jussi_kivilinna/nuttx/stm32l4_serial_pm (pull request #534 )

2017-11-10 13:05:00 +00:00

stm32f7

Minor cleanup of some spacing.

2017-11-13 14:06:03 -06:00

stm32l4

Merged in jussi_kivilinna/nuttx/stm32l4_serial_pm (pull request #534 )

2017-11-10 13:05:00 +00:00

str71x

Convert remaining serial drivers to use use irq_attach.

2017-02-27 10:27:14 -06:00

tiva

Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep().

2017-10-06 10:15:01 -06:00

tms570

Squashed commit of the following:

2017-10-09 13:11:17 -06:00

xmc4

arch/: Remove dangling space at the end of lines.

2017-06-28 13:16:48 -06:00

.gitignore

Remove the arch/ subdirectory; replace it with a submodule

2015-07-22 10:56:22 -06:00

Makefile

Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR

2017-05-13 16:01:38 -06:00