sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ca747ee289
nuttx/configs/samd20-xplained/include/board.h
Gregory Nutt c3b406826e Rename all usage of samdl/SAMDL to samd2l2/SAMD2L2 to make room in the name space for the forthcoming samd5e5/SAMD5E5 
Squashed commit of the following:

    Change all remaining occurrences of SAMDL to SAMD2L2.

    configs/:  Change all remaining occurrences of SAMDL to SAMD2L2

    configs/:  Change all occurrences of CONFIG_SAMDL_* to CONFIG_SAMD2L2_*
    arch/arm/src and include:  Rename all directories from samdl to samd2l2.  Change all configuration variable names and other usage from SAMDL to SAMD2L2.
2018-07-22 15:54:12 -06:00

536 lines
21 KiB
C
Raw Blame History

/************************************************************************************
* configs/samd20-xplained/include/board.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H
#define __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# ifdef CONFIG_SAMD2L2_GPIOIRQ
# include <arch/irq.h>
# endif
#endif
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* Overview
*
* OSC8M Output = 8MHz
* `- GCLK1 Input = 8MHz Prescaler = 1 output = 8MHz
* `- DFLL Input = 8MHz Multiplier = 6 output = 48MHz
* `- GCLK0 Input = 48MHz Prescaler = 1 output = 48MHz
* `- PM Input = 48Mhz CPU divider = 1 CPU frequency = 48MHz
* APBA divider = 1 APBA frequency = 48MHz
* APBB divider = 1 APBB frequency = 48MHz
* APBC divider = 1 APBC frequency = 48MHz
*
* The SAMD20 Xplained Pro has one on-board crystal:
*
* XC101 32.768KHz XOSC32
*
* REVISIT: Not currently used, may want to use as GCLK1 source with
* DFLL multiplier of ((48000000+16384)/32768) = 1465 which would yield
* a clock of 48,005,120 MHz.
*/
/* XOSC Configuration -- Not available
*
* BOARD_XOSC_ENABLE - Boolean (defined / not defined)
* BOARD_XOSC_FREQUENCY - In Hz
* BOARD_XOSC_STARTUPTIME - See SYSCTRL_XOSC_STARTUP_* definitions
* BOARD_XOSC_ISCRYSTAL - Boolean (defined / not defined)
* BOARD_XOSC_AMPGC - Boolean (defined / not defined)
* BOARD_XOSC_ONDEMAND - Boolean (defined / not defined)
* BOARD_XOSC_RUNINSTANDBY - Boolean (defined / not defined)
*/
#undef BOARD_XOSC_ENABLE
#define BOARD_XOSC_FREQUENCY 12000000UL
#define BOARD_XOSC_STARTUPTIME SYSCTRL_XOSC_STARTUP_1S
#define BOARD_XOSC_ISCRYSTAL 1
#define BOARD_XOSC_AMPGC 1
#define BOARD_XOSC_ONDEMAND 1
#undef BOARD_XOSC_RUNINSTANDBY
/* XOSC32 Configuration -- Not used
*
* BOARD_XOSC32K_ENABLE - Boolean (defined / not defined)
* BOARD_XOSC32K_FREQUENCY - In Hz
* BOARD_XOSC32K_STARTUPTIME - See SYSCTRL_XOSC32K_STARTUP_* definitions
* BOARD_XOSC32K_ISCRYSTAL - Boolean (defined / not defined)
* BOARD_XOSC32K_AAMPEN - Boolean (defined / not defined)
* BOARD_XOSC32K_EN1KHZ - Boolean (defined / not defined)
* BOARD_XOSC32K_EN32KHZ - Boolean (defined / not defined)
* BOARD_XOSC32K_ONDEMAND - Boolean (defined / not defined)
* BOARD_XOSC32K_RUNINSTANDBY - Boolean (defined / not defined)
*/
#undef BOARD_XOSC32K_ENABLE
#define BOARD_XOSC32K_FREQUENCY 32768 /* 32.768KHz XTAL */
#define BOARD_XOSC32K_STARTUPTIME SYSCTRL_XOSC32K_STARTUP_2S
#define BOARD_XOSC32K_ISCRYSTAL 1
#define BOARD_XOSC32K_AAMPEN 1
#undef BOARD_XOSC32K_EN1KHZ
#define BOARD_XOSC32K_EN32KHZ 1
#define BOARD_XOSC32K_ONDEMAND 1
#undef BOARD_XOSC32K_RUNINSTANDBY
/* OSC32 Configuration -- not used
*
* BOARD_OSC32K_ENABLE - Boolean (defined / not defined)
* BOARD_OSC32K_FREQUENCY - In Hz
* BOARD_OSC32K_STARTUPTIME - See SYSCTRL_OSC32K_STARTUP_* definitions
* BOARD_OSC32K_EN1KHZ - Boolean (defined / not defined)
* BOARD_OSC32K_EN32KHZ - Boolean (defined / not defined)
* BOARD_OSC32K_ONDEMAND - Boolean (defined / not defined)
* BOARD_OSC32K_RUNINSTANDBY - Boolean (defined / not defined)
*/
#undef BOARD_OSC32K_ENABLE
#define BOARD_OSC32K_FREQUENCY 32768 /* 32.768kHz internal oscillator */
#define BOARD_OSC32K_STARTUPTIME SYSCTRL_OSC32K_STARTUP_4MS
#define BOARD_OSC32K_EN1KHZ 1
#define BOARD_OSC32K_EN32KHZ 1
#define BOARD_OSC32K_ONDEMAND 1
#undef BOARD_OSC32K_RUNINSTANDBY
/* OSC8M Configuration -- always enabled
*
* BOARD_OSC8M_PRESCALER - See SYSCTRL_OSC8M_PRESC_DIV* definitions
* BOARD_OSC8M_ONDEMAND - Boolean (defined / not defined)
* BOARD_OSC8M_RUNINSTANDBY - Boolean (defined / not defined)
*/
#define BOARD_OSC8M_PRESCALER SYSCTRL_OSC8M_PRESC_DIV1
#define BOARD_OSC8M_ONDEMAND 1
#undef BOARD_OSC8M_RUNINSTANDBY
#define BOARD_OSC8M_FREQUENCY 8000000 /* 8MHz high-accuracy internal oscillator */
/* OSCULP32K Configuration -- not used. */
#define BOARD_OSCULP32K_FREQUENCY 32000 /* 32kHz ultra-low-power internal oscillator */
/* Digital Frequency Locked Loop configuration. In closed-loop mode, the
* DFLL output frequency (Fdfll) is given by:
*
* Fdfll = DFLLmul * Frefclk
* = 6 * 8000000 = 48MHz
*
* Where the reference clock is Generic Clock Channel 0 output of GLCK1.
* GCLCK1 provides OSC8M, undivided.
*
* When operating in open-loop mode, the output frequency of the DFLL will
* be determined by the values written to the DFLL Coarse Value bit group
* and the DFLL Fine Value bit group in the DFLL Value register.
*
* BOARD_DFLL_OPENLOOP - Boolean (defined / not defined)
* BOARD_DFLL_TRACKAFTERFINELOCK - Boolean (defined / not defined)
* BOARD_DFLL_KEEPLOCKONWAKEUP - Boolean (defined / not defined)
* BOARD_DFLL_ENABLECHILLCYCLE - Boolean (defined / not defined)
* BOARD_DFLL_QUICKLOCK - Boolean (defined / not defined)
* BOARD_DFLL_ONDEMAND - Boolean (defined / not defined)
* BOARD_DFLL_COARSEVALUE - Value
* BOARD_DFLL_FINEVALUE - Value
*
* Open Loop mode only:
* BOARD_DFLL_COARSEVALUE - Value
* BOARD_DFLL_FINEVALUE - Value
*
* Closed loop mode only:
* BOARD_DFLL_GCLKGEN - GCLK index
* BOARD_DFLL_MULTIPLIER - Value
* BOARD_DFLL_MAXCOARSESTEP - Value
* BOARD_DFLL_MAXFINESTEP - Value
*
* BOARD_DFLL_FREQUENCY - The resulting frequency
*/
#define BOARD_DFLL_ENABLE 1
#undef BOARD_DFLL_OPENLOOP
#undef BOARD_DFLL_ONDEMAND
#undef BOARD_DFLL_RUNINSTANDBY
/* DFLL open loop mode configuration */
#define BOARD_DFLL_COARSEVALUE (0x1f / 4)
#define BOARD_DFLL_FINEVALUE (0xff / 4)
/* DFLL closed loop mode configuration */
#define BOARD_DFLL_SRCGCLKGEN 1
#define BOARD_DFLL_MULTIPLIER 6
#define BOARD_DFLL_QUICKLOCK 1
#define BOARD_DFLL_TRACKAFTERFINELOCK 1
#define BOARD_DFLL_KEEPLOCKONWAKEUP 1
#define BOARD_DFLL_ENABLECHILLCYCLE 1
#define BOARD_DFLL_MAXCOARSESTEP (0x1f / 4)
#define BOARD_DFLL_MAXFINESTEP (0xff / 4)
#define BOARD_DFLL_FREQUENCY (48000000)
/* GCLK Configuration
*
* Global enable/disable.
*
* BOARD_GCLK_ENABLE - Boolean (defined / not defined)
*
* For n=1-7:
* BOARD_GCLKn_ENABLE - Boolean (defined / not defined)
*
* For n=0-8:
* BOARD_GCLKn_RUN_IN_STANDBY - Boolean (defined / not defined)
* BOARD_GCLKn_CLOCK_SOURCE - See GCLK_GENCTRL_SRC_* definitions
* BOARD_GCLKn_PRESCALER - Value
* BOARD_GCLKn_OUTPUT_ENABLE - Boolean (defined / not defined)
*/
#define BOARD_GCLK_ENABLE 1
/* GCLK generator 0 (Main Clock) - Source is the DFLL */
#undef BOARD_GCLK0_RUN_IN_STANDBY
#define BOARD_GCLK0_CLOCK_SOURCE GCLK_GENCTRL_SRC_DFLL48M
#define BOARD_GCLK0_PRESCALER 1
#undef BOARD_GCLK0_OUTPUT_ENABLE
#define BOARD_GCLK0_FREQUENCY (BOARD_DFLL_FREQUENCY / BOARD_GCLK0_PRESCALER)
/* Configure GCLK generator 1 - Drives the DFLL */
#define BOARD_GCLK1_ENABLE 1
#undef BOARD_GCLK1_RUN_IN_STANDBY
#define BOARD_GCLK1_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
#define BOARD_GCLK1_PRESCALER 1
#undef BOARD_GCLK1_OUTPUT_ENABLE
#define BOARD_GCLK1_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK1_PRESCALER)
/* Configure GCLK generator 2 (RTC) */
#undef BOARD_GCLK2_ENABLE
#undef BOARD_GCLK2_RUN_IN_STANDBY
#define BOARD_GCLK2_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC32K
#define BOARD_GCLK2_PRESCALER 32
#undef BOARD_GCLK2_OUTPUT_ENABLE
#define BOARD_GCLK2_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK2_PRESCALER)
/* Configure GCLK generator 3 */
#undef BOARD_GCLK3_ENABLE
#undef BOARD_GCLK3_RUN_IN_STANDBY
#define BOARD_GCLK3_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
#define BOARD_GCLK3_PRESCALER 1
#undef BOARD_GCLK3_OUTPUT_ENABLE
#define BOARD_GCLK3_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK3_PRESCALER)
/* Configure GCLK generator 4 */
#undef BOARD_GCLK4_ENABLE
#undef BOARD_GCLK4_RUN_IN_STANDBY
#define BOARD_GCLK4_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
#define BOARD_GCLK4_PRESCALER 1
#undef BOARD_GCLK4_OUTPUT_ENABLE
#define BOARD_GCLK4_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK4_PRESCALER)
/* Configure GCLK generator 5 */
#undef BOARD_GCLK5_ENABLE
#undef BOARD_GCLK5_RUN_IN_STANDBY
#define BOARD_GCLK5_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
#define BOARD_GCLK5_PRESCALER 1
#undef BOARD_GCLK5_OUTPUT_ENABLE
#define BOARD_GCLK5_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK5_PRESCALER)
/* Configure GCLK generator 6 */
#undef BOARD_GCLK6_ENABLE
#undef BOARD_GCLK6_RUN_IN_STANDBY
#define BOARD_GCLK6_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
#define BOARD_GCLK6_PRESCALER 1
#undef BOARD_GCLK6_OUTPUT_ENABLE
#define BOARD_GCLK6_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK6_PRESCALER)
/* Configure GCLK generator 7 */
#undef BOARD_GCLK7_ENABLE
#undef BOARD_GCLK7_RUN_IN_STANDBY
#define BOARD_GCLK7_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
#define BOARD_GCLK7_PRESCALER 1
#undef BOARD_GCLK7_OUTPUT_ENABLE
#define BOARD_GCLK7_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK7_PRESCALER)
/* The source of the main clock is always GCLK_MAIN. Also called GCLKGEN[0], this is
* the clock feeding the Power Manager. The Power Manager, in turn, generates main
* clock which is divided down to produce the CPU, AHB, and APB clocks.
*
* The main clock is initially OSC8M divided by 8.
*/
#define BOARD_GCLK_MAIN_FREQUENCY BOARD_GCLK0_FREQUENCY
/* Main clock dividers
*
* BOARD_CPU_DIVIDER - See PM_CPUSEL_CPUDIV_* definitions
* BOARD_CPU_FRQUENCY - In Hz
* BOARD_CPU_FAILDECT - Boolean (defined / not defined)
* BOARD_APBA_DIVIDER - See M_APBASEL_APBADIV_* definitions
* BOARD_APBA_FRQUENCY - In Hz
* BOARD_APBB_DIVIDER - See M_APBBSEL_APBBDIV_* definitions
* BOARD_APBB_FRQUENCY - In Hz
* BOARD_APBC_DIVIDER - See M_APBCSEL_APBCDIV_* definitions
* BOARD_APBC_FRQUENCY - In Hz
*/
#define BOARD_CPU_FAILDECT 1
#define BOARD_CPU_DIVIDER PM_CPUSEL_CPUDIV_1
#define BOARD_APBA_DIVIDER PM_APBASEL_APBADIV_1
#define BOARD_APBB_DIVIDER PM_APBBSEL_APBBDIV_1
#define BOARD_APBC_DIVIDER PM_APBCSEL_APBCDIV_1
/* Resulting frequencies */
#define BOARD_MCK_FREQUENCY (BOARD_GCLK_MAIN_FREQUENCY)
#define BOARD_CPU_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBA_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBB_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBC_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBD_FREQUENCY (BOARD_MCK_FREQUENCY)
/* FLASH wait states
*
* Vdd Range Wait states Maximum Operating Frequency
* ------------- -------------- ---------------------------
* 1.62V to 2.7V 0 14 MHz
* 1 28 MHz
* 2 42 MHz
* 3 48 MHz
* 2.7V to 3.63V 0 24 MHz
* 1 48 MHz
*/
#if 0 /* REVISIT -- should not be necessary */
# define BOARD_FLASH_WAITSTATES 1
#else
# define BOARD_FLASH_WAITSTATES 2
#endif
/* SERCOM definitions ***************************************************************/
/* This is the source clock generator for the GCLK_SERCOM_SLOW clock that is common
* to all SERCOM modules.
*/
#define BOARD_SERCOM05_SLOW_GCLKGEN 0
/* SERCOM0 SPI is available on EXT1
*
* PIN PORT SERCOM FUNCTION
* --- ------------------ -----------
* 15 PA5 SERCOM0 PAD1 SPI SS
* 16 PA6 SERCOM0 PAD2 SPI MOSI
* 17 PA4 SERCOM0 PAD0 SPI MISO
* 18 PA7 SERCOM0 PAD3 SPI SCK
*/
#define BOARD_SERCOM0_GCLKGEN 0
#define BOARD_SERCOM0_SLOW_GCLKGEN BOARD_SERCOM05_SLOW_GCLKGEN
#define BOARD_SERCOM0_MUXCONFIG (SPI_CTRLA_DOPO_DOPAD231 | SPI_CTRLA_DIPAD0)
#define BOARD_SERCOM0_PINMAP_PAD0 PORT_SERCOM0_PAD0_2 /* SPI_MISO */
#define BOARD_SERCOM0_PINMAP_PAD1 0 /* microSD_SS */
#define BOARD_SERCOM0_PINMAP_PAD2 PORT_SERCOM0_PAD2_2 /* SPI_MOSI */
#define BOARD_SERCOM0_PINMAP_PAD3 PORT_SERCOM0_PAD3_2 /* SPI_SCK */
#define BOARD_SERCOM0_FREQUENCY BOARD_GCLK0_FREQUENCY
/* SERCOM1 SPI is available on EXT2
*
* PIN PORT SERCOM FUNCTION
* --- ------------------ -----------
* 15 PA17 SERCOM1 PAD1 SPI SS
* 16 PA18 SERCOM1 PAD2 SPI MOSI
* 17 PA16 SERCOM1 PAD0 SPI MISO
* 18 PA19 SERCOM1 PAD3 SPI SCK
*/
#define BOARD_SERCOM1_GCLKGEN 0
#define BOARD_SERCOM1_SLOW_GCLKGEN BOARD_SERCOM05_SLOW_GCLKGEN
#define BOARD_SERCOM1_MUXCONFIG (SPI_CTRLA_DOPO_DOPAD231 | SPI_CTRLA_DIPAD0)
#define BOARD_SERCOM1_PINMAP_PAD0 PORT_SERCOM1_PAD0_1 /* SPI_MISO */
#define BOARD_SERCOM1_PINMAP_PAD1 0 /* microSD_SS */
#define BOARD_SERCOM1_PINMAP_PAD2 PORT_SERCOM1_PAD2_1 /* SPI_MOSI */
#define BOARD_SERCOM1_PINMAP_PAD3 PORT_SERCOM1_PAD3_1 /* SPI_SCK */
#define BOARD_SERCOM1_FREQUENCY BOARD_GCLK0_FREQUENCY
/* The SAMD20 Xplained Pro contains an Embedded Debugger (EDBG) that can be
* used to program and debug the ATSAMD20J18A using Serial Wire Debug (SWD).
* The Embedded debugger also include a Virtual COM port interface over
* SERCOM3. Virtual COM port connections:
*
* PA24 SERCOM3 / USART TXD
* PA25 SERCOM3 / USART RXD
*/
#define BOARD_SERCOM3_GCLKGEN 0
#define BOARD_SERCOM3_SLOW_GCLKGEN BOARD_SERCOM05_SLOW_GCLKGEN
#define BOARD_SERCOM3_MUXCONFIG (USART_CTRLA_RXPAD3 | USART_CTRLA_TXPAD2)
#define BOARD_SERCOM3_PINMAP_PAD0 0
#define BOARD_SERCOM3_PINMAP_PAD1 0
#define BOARD_SERCOM3_PINMAP_PAD2 PORT_SERCOM3_PAD2_1 /* USART TX */
#define BOARD_SERCOM3_PINMAP_PAD3 PORT_SERCOM3_PAD3_1 /* USART RX */
#define BOARD_SERCOM3_FREQUENCY BOARD_GCLK0_FREQUENCY
/* The SERCOM4 USART is available on connectors EXT1, EXT2, and EXT3
*
* PIN EXT1 EXT2 EXT3 GPIO Function
* ---- ---- ---- ---- ------------------
* 13 PB09 PB13 PB11 SERCOM4 / USART RX
* 14 PB08 PB12 PB12 SERCOM4 / USART TX
* 19 GND GND GND N/A
* 20 VCC VCC VCC N/A
*
* If you have a TTL to RS-232 converter then this is the most convenient
* serial console to use (because you don't lose the console device each time
* you lose the USB connection). It is the default in all of the SAMD20
* configurations.
*/
#define BOARD_SERCOM4_GCLKGEN 0
#define BOARD_SERCOM4_SLOW_GCLKGEN BOARD_SERCOM05_SLOW_GCLKGEN
#if defined(CONFIG_SAMD20_XPLAINED_USART4_EXT1)
# define BOARD_SERCOM4_MUXCONFIG (USART_CTRLA_RXPAD1 | USART_CTRLA_TXPAD0)
# define BOARD_SERCOM4_PINMAP_PAD0 PORT_SERCOM4_PAD0_3 /* USART TX */
# define BOARD_SERCOM4_PINMAP_PAD1 PORT_SERCOM4_PAD1_3 /* USART RX */
# define BOARD_SERCOM4_PINMAP_PAD2 0
# define BOARD_SERCOM4_PINMAP_PAD3 0
#elif defined(CONFIG_SAMD20_XPLAINED_USART4_EXT2)
# define BOARD_SERCOM4_MUXCONFIG (USART_CTRLA_RXPAD1 | USART_CTRLA_TXPAD0)
# define BOARD_SERCOM4_PINMAP_PAD0 PORT_SERCOM4_PAD0_1 /* USART TX */
# define BOARD_SERCOM4_PINMAP_PAD1 PORT_SERCOM4_PAD1_1 /* USART RX */
# define BOARD_SERCOM4_PINMAP_PAD2 0
# define BOARD_SERCOM4_PINMAP_PAD3 0
#else /* if defined(CONFIG_SAMD20_XPLAINED_USART4_EXT3) */
# define BOARD_SERCOM4_MUXCONFIG (USART_CTRLA_RXPAD3 | USART_CTRLA_TXPAD2)
# define BOARD_SERCOM4_PINMAP_PAD0 0
# define BOARD_SERCOM4_PINMAP_PAD1 0
# define BOARD_SERCOM4_PINMAP_PAD2 PORT_SERCOM4_PAD2_3 /* USART TX */
# define BOARD_SERCOM4_PINMAP_PAD3 PORT_SERCOM4_PAD3_3 /* USART RX */
#endif
#define BOARD_SERCOM4_FREQUENCY BOARD_GCLK0_FREQUENCY
/* SERCOM5 SPI is available on EXT3
*
* PIN PORT SERCOM FUNCTION
* --- ------------------ -----------
* 15 PB17 SERCOM5 PAD1 SPI SS
* 16 PB22 SERCOM5 PAD2 SPI MOSI
* 17 PB16 SERCOM5 PAD0 SPI MISO
* 18 PB23 SERCOM5 PAD3 SPI SCK
*/
#define BOARD_SERCOM5_GCLKGEN 0
#define BOARD_SERCOM5_SLOW_GCLKGEN BOARD_SERCOM05_SLOW_GCLKGEN
#define BOARD_SERCOM5_MUXCONFIG (SPI_CTRLA_DOPO_DOPAD231 | SPI_CTRLA_DIPAD0)
#define BOARD_SERCOM5_PINMAP_PAD0 PORT_SERCOM5_PAD0_1 /* SPI_MISO */
#define BOARD_SERCOM5_PINMAP_PAD1 0 /* microSD_SS */
#define BOARD_SERCOM5_PINMAP_PAD2 PORT_SERCOM5_PAD2_4 /* SPI_MOSI */
#define BOARD_SERCOM5_PINMAP_PAD3 PORT_SERCOM5_PAD3_4 /* SPI_SCK */
#define BOARD_SERCOM5_FREQUENCY BOARD_GCLK0_FREQUENCY
/* LED definitions ******************************************************************/
/* There are three LEDs on board the SAMD20 Xplained Pro board: The EDBG
* controls two of the LEDs, a power LED and a status LED. There is only
* one user controllable LED, a yellow LED labelled STATUS near the SAMD20 USB
* connector.
*
* This LED is controlled by PC07 and the LED can be activated by driving the
* PA14 to GND.
*/
/* LED index values for use with board_userled() */
#define BOARD_STATUS_LED 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_STATUS LED_BIT (1 << BOARD_STATUS_LED)
/* When CONFIG_ARCH_LEDS is defined in the NuttX configuration, NuttX will
* control the LED as defined below. Thus if the LED is statically on, NuttX has
* successfully booted and is, apparently, running normally. If the LED is
* flashing at approximately 2Hz, then a fatal error has been detected and the
* system has halted.
*/
#define LED_STARTED 0 /* STATUS LED=OFF */
#define LED_HEAPALLOCATE 0 /* STATUS LED=OFF */
#define LED_IRQSENABLED 0 /* STATUS LED=OFF */
#define LED_STACKCREATED 1 /* STATUS LED=ON */
#define LED_INIRQ 2 /* STATUS LED=no change */
#define LED_SIGNAL 2 /* STATUS LED=no change */
#define LED_ASSERTION 2 /* STATUS LED=no change */
#define LED_PANIC 3 /* STATUS LED=flashing */
/* Button definitions ***************************************************************/
/* Mechanical buttons:
*
* The SAMD20 Xplained Pro contains two mechanical buttons. One button is the
* RESET button connected to the SAMD20 reset line and the other is a generic user
* configurable button. When a button is pressed it will drive the I/O line to GND.
*
* PA15 SW0
*/
/* The SAMD20 Xplained Pro supports one button: */
#define BUTTON_SW0 0
#define NUM_BUTTONS 1
#define BUTTON_SW0_BIT (1 << BUTTON_SW0)
#endif /* __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink