nuttx

2014-11-03 11:59:53 -06:00

chip.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

Kconfig

Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required

2014-10-29 15:47:15 -06:00

Make.defs

Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless

2015-01-24 06:49:51 -06:00

sam3u_gpio.h

SAM4E: Add support for PIO and peripheral clocks

2014-02-21 12:34:04 -06:00

sam3u_periphclks.h

Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips

2014-02-22 10:38:25 -06:00

sam3x_gpio.h

SAM4E: Add support for PIO and peripheral clocks

2014-02-21 12:34:04 -06:00

sam3x_periphclks.h

SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte

2014-09-08 06:14:59 -06:00

sam4cm_gpio.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4cm_periphclks.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4cm_supc.c

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4cm_supc.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4e_gpio.h

SAM4E: Pin multiplex definition header file

2014-02-21 18:10:53 -06:00

sam4e_periphclks.h

SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver

2014-03-12 15:03:59 -06:00

sam4l_clockconfig.c

Add support for the SAM4L Xplained Pro I/O1 module

2013-06-15 10:56:08 -06:00

sam4l_gpio.c

Fixes for more issues found by cppcheck

2014-11-24 17:00:26 -06:00

sam4l_gpio.h

More trailing whilespace removal

2014-04-13 16:22:22 -06:00

sam4l_periphclks.c

Fix typo cloned to many files: SAM32 vs SAM34

2014-02-12 13:00:24 -06:00

sam4l_periphclks.h

Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port

2013-06-26 18:46:44 -06:00

sam4s_gpio.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4s_periphclks.h

SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S

2014-11-16 06:43:08 -06:00

sam_aes.c

Move crypto header files from include/crypto to include/nuttx/crypto

2014-07-03 18:35:08 -06:00

sam_aes.h

Correct authorship on a few files

2014-07-03 18:28:26 -06:00

sam_allocateheap.c

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_clockconfig.c

SAM4CM: Fixes from Macs N

2014-06-27 12:27:02 -06:00

sam_clockconfig.h

Move SAM4L peripheral clock logic to a separate file

2013-06-05 18:48:30 -06:00

sam_cmcc.c

SAM4E CMCC: Fix some errors introducted in last check-in

2014-03-26 16:32:16 -06:00

sam_cmcc.h

SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver

2014-03-12 15:03:59 -06:00

sam_dmac.c

Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h

2014-08-08 17:53:55 -06:00

sam_dmac.h

SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts

2014-03-14 11:57:42 -06:00

sam_emac.c

All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called

2015-01-21 11:36:33 -06:00

sam_emac.h

SAM4E-EK: Add support for PHY insterrupt

2014-10-24 12:28:57 -06:00

sam_gpio.c

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam_gpio.h

SAM3/4: Fix conditional compilation in GPIO IRQ logic

2014-10-24 10:44:43 -06:00

sam_gpioirq.c

Another fix to SAM3/4 GPIO IRQ issue

2014-10-24 10:55:52 -06:00

sam_hsmci.c

wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.

2014-08-21 11:16:55 -06:00

sam_hsmci.h

Rename sam3u/ architecture directories to sam34/ to include the SAM4L

2013-06-02 13:57:22 -06:00

sam_irq.c

Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures

2014-08-08 18:39:28 -06:00

sam_lowputc.c

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam_lowputc.h

Rename sam3u/ architecture directories to sam34/ to include the SAM4L

2013-06-02 13:57:22 -06:00

sam_mpuinit.c

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_mpuinit.h

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_periphclks.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam_rtc.c

Add SAM3/4 RTT driver. From Bob Doiron

2014-05-05 14:35:37 -06:00

sam_rtc.h

Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)

2014-04-22 13:42:38 -06:00

sam_rtt.c

Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte

2014-09-17 07:42:12 -06:00

sam_rtt.h

Add SAM3/4 RTT driver. From Bob Doiron

2014-05-05 14:35:37 -06:00

sam_serial.c

Costmetic changes -- spacing, comments.

2014-10-30 16:33:40 -06:00

sam_spi.c

wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.

2014-08-21 11:16:55 -06:00

sam_spi.h

Backport SPI driver enhancements from SAMA5 to SAM3/4

2014-03-13 10:34:35 -06:00

sam_start.c

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_tc.c

Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt

2015-01-13 15:55:54 -06:00

sam_tc.h

Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)

2014-04-22 13:42:38 -06:00

sam_timerisr.c

Move clock functions from sched/ to sched/clock

2014-08-08 14:43:02 -06:00

sam_udp.c

Rename kmalloc to kmm_malloc for consistency

2014-08-31 17:26:36 -06:00

sam_udp.h

SAM4E: Add USB full speed device (UDP) driver

2014-03-17 12:37:55 -06:00

sam_userspace.c

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_userspace.h

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_vectors.S

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_wdt.c

SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte

2014-09-08 06:14:59 -06:00

sam_wdt.h

Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)

2014-04-22 13:42:38 -06:00