p-szafonimateusz 545774eb88 serial/pci_16550: make sure that interrupts are disabled during init ... Make sure that interrups are disabled during initialization. This is a proper fix for an unexpected MSI interrupt for PCI serial driver. Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>		2024-09-18 23:54:12 +08:00
..
CMakeLists.txt	drivers: add UART 16550 compatible PCI device support	2024-09-15 03:37:58 +08:00
Kconfig	drivers: add UART 16550 compatible PCI device support	2024-09-15 03:37:58 +08:00
Kconfig-16550	drivers/uart_16550: configure MCR_OUT2 bit from Kconfig	2024-09-15 03:37:58 +08:00
Kconfig-cmsdk	drivers/serial:support arm cmsdk drivers	2024-04-26 18:42:35 -03:00
Kconfig-lpuart
Kconfig-pci	drivers: add UART 16550 compatible PCI device support	2024-09-15 03:37:58 +08:00
Kconfig-pl011	drivers/serial/uart_pl011.c : add the interface about clock and reset control for reducing power consumption.	2024-06-03 21:18:44 +08:00
Kconfig-sci
Kconfig-uart
Kconfig-usart
Make.defs	drivers: add UART 16550 compatible PCI device support	2024-09-15 03:37:58 +08:00
ptmx.c	pty: use mutex to protect alloc minor	2024-08-25 22:16:53 +08:00
pty.c	drivers/pty: support pty write to send signal, like serial driver	2024-09-17 20:11:10 +08:00
pty.h
serial_cmsdk.c	drivers/serial:support arm cmsdk drivers	2024-04-26 18:42:35 -03:00
serial_dma.c	drivers/serial: unmodify head and tail pointers	2023-09-19 09:41:07 +08:00
serial_gdbstub.c	serial/gdbstub: Change GDBSTUB_ to GDB_	2024-06-24 23:51:43 +08:00
serial_io.c	tty:support tty c_cc VMIN & VTIME	2023-04-29 13:48:52 +08:00
serial.c	drivers/serial: fix deadlock when executing rexec in a user task	2024-09-14 10:27:40 +08:00
uart_16550.c	drivers: prepare 16550 UART driver to support PCI	2024-09-15 03:37:58 +08:00
uart_bth4.c	poll: pollsetup should notify only one fd passd by caller	2023-11-21 09:07:17 +01:00
uart_bth5.c	poll: pollsetup should notify only one fd passd by caller	2023-11-21 09:07:17 +01:00
uart_pci_16550.c	serial/pci_16550: make sure that interrupts are disabled during init	2024-09-18 23:54:12 +08:00
uart_pl011.c	serial/uart_pl011: default syslog needs to check flow control in up_putc	2024-09-12 17:15:40 +08:00
uart_ram.c	drivers/serial: add ram uart driver	2023-09-19 09:41:07 +08:00
uart_rpmsg.c	fix:uart_rpmsg_dmareceive data copy to nbuffer should start from data + length	2024-08-22 09:23:12 -03:00