nuttx/arch/arm/src/stm32/stm32_dumpgpio.c
patacongo 2df878981d More stm32f3discovery updates
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5624 42af7a65-404d-4744-a932-0658087f49c3
2013-02-08 14:42:18 +00:00

210 lines
7.3 KiB
C

/****************************************************************************
* arch/arm/src/stm32/stm32_gpio.c
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <debug.h>
#include "up_arch.h"
#include "chip.h"
#include "stm32_gpio.h"
#include "stm32_rcc.h"
#ifdef CONFIG_DEBUG
/****************************************************************************
* Private Data
****************************************************************************/
/* Port letters for prettier debug output */
#ifdef CONFIG_DEBUG
static const char g_portchar[STM32_NGPIO_PORTS] =
{
#if STM32_NGPIO_PORTS > 9
# error "Additional support required for this number of GPIOs"
#elif STM32_NGPIO_PORTS > 8
'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I'
#elif STM32_NGPIO_PORTS > 7
'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H'
#elif STM32_NGPIO_PORTS > 6
'A', 'B', 'C', 'D', 'E', 'F', 'G'
#elif STM32_NGPIO_PORTS > 5
'A', 'B', 'C', 'D', 'E', 'F'
#elif STM32_NGPIO_PORTS > 4
'A', 'B', 'C', 'D', 'E'
#elif STM32_NGPIO_PORTS > 3
'A', 'B', 'C', 'D'
#elif STM32_NGPIO_PORTS > 2
'A', 'B', 'C'
#elif STM32_NGPIO_PORTS > 1
'A', 'B'
#elif STM32_NGPIO_PORTS > 0
'A'
#else
# error "Bad number of GPIOs"
#endif
};
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: stm32_dumpgpio
*
* Description:
* Dump all GPIO registers associated with the provided base address
*
****************************************************************************/
int stm32_dumpgpio(uint32_t pinset, const char *msg)
{
irqstate_t flags;
uint32_t base;
unsigned int port;
unsigned int pin;
/* Get the base address associated with the GPIO port */
port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT;
base = g_gpiobase[port];
/* The following requires exclusive access to the GPIO registers */
flags = irqsave();
#if defined(CONFIG_STM32_STM32F10XX)
lldbg("GPIO%c pinset: %08x base: %08x -- %s\n",
g_portchar[port], pinset, base, msg);
if ((getreg32(STM32_RCC_APB2ENR) & RCC_APB2ENR_IOPEN(port)) != 0)
{
lldbg(" CR: %08x %08x IDR: %04x ODR: %04x LCKR: %04x\n",
getreg32(base + STM32_GPIO_CRH_OFFSET),
getreg32(base + STM32_GPIO_CRL_OFFSET),
getreg32(base + STM32_GPIO_IDR_OFFSET),
getreg32(base + STM32_GPIO_ODR_OFFSET),
getreg32(base + STM32_GPIO_LCKR_OFFSET));
lldbg(" EVCR: %02x MAPR: %08x CR: %04x %04x %04x %04x\n",
getreg32(STM32_AFIO_EVCR), getreg32(STM32_AFIO_MAPR),
getreg32(STM32_AFIO_EXTICR1),
getreg32(STM32_AFIO_EXTICR2),
getreg32(STM32_AFIO_EXTICR3),
getreg32(STM32_AFIO_EXTICR4));
}
else
{
lldbg(" GPIO%c not enabled: APB2ENR: %08x\n",
g_portchar[port], getreg32(STM32_RCC_APB2ENR));
}
#elif defined(CONFIG_STM32_STM32F30XX)
DEBUGASSERT(port < STM32_NGPIO_PORTS);
lldbg("GPIO%c pinset: %08x base: %08x -- %s\n",
g_portchar[port], pinset, base, msg);
/* GPIOs are always enabled */
lldbg(" MODE: %08x OTYPE: %04x OSPEED: %08x PUPDR: %08x\n",
getreg32(base + STM32_GPIO_MODER_OFFSET),
getreg32(base + STM32_GPIO_OTYPER_OFFSET),
getreg32(base + STM32_GPIO_OSPEED_OFFSET),
getreg32(base + STM32_GPIO_PUPDR_OFFSET));
lldbg(" IDR: %04x ODR: %04x BSRR: %08x LCKR: %04x\n",
getreg32(base + STM32_GPIO_IDR_OFFSET),
getreg32(base + STM32_GPIO_ODR_OFFSET),
getreg32(base + STM32_GPIO_BSRR_OFFSET),
getreg32(base + STM32_GPIO_LCKR_OFFSET));
lldbg(" AFRH: %08x AFRL: %08x BRR: %04x\n",
getreg32(base + STM32_GPIO_ARFH_OFFSET),
getreg32(base + STM32_GPIO_AFRL_OFFSET),
getreg32(base + STM32_GPIO_BRR_OFFSET));
#elif defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
DEBUGASSERT(port < STM32_NGPIO_PORTS);
lldbg("GPIO%c pinset: %08x base: %08x -- %s\n",
g_portchar[port], pinset, base, msg);
if ((getreg32(STM32_RCC_AHB1ENR) & RCC_AHB1ENR_GPIOEN(port)) != 0)
{
lldbg(" MODE: %08x OTYPE: %04x OSPEED: %08x PUPDR: %08x\n",
getreg32(base + STM32_GPIO_MODER_OFFSET),
getreg32(base + STM32_GPIO_OTYPER_OFFSET),
getreg32(base + STM32_GPIO_OSPEED_OFFSET),
getreg32(base + STM32_GPIO_PUPDR_OFFSET));
lldbg(" IDR: %04x ODR: %04x BSRR: %08x LCKR: %04x\n",
getreg32(base + STM32_GPIO_IDR_OFFSET),
getreg32(base + STM32_GPIO_ODR_OFFSET),
getreg32(base + STM32_GPIO_BSRR_OFFSET),
getreg32(base + STM32_GPIO_LCKR_OFFSET));
lldbg(" AFRH: %08x AFRL: %08x\n",
getreg32(base + STM32_GPIO_ARFH_OFFSET),
getreg32(base + STM32_GPIO_AFRL_OFFSET));
}
else
{
lldbg(" GPIO%c not enabled: AHB1ENR: %08x\n",
g_portchar[port], getreg32(STM32_RCC_AHB1ENR));
}
#else
# error "Unsupported STM32 chip"
#endif
irqrestore(flags);
return OK;
}
#endif /* CONFIG_DEBUG */