nuttx

History

patacongo 9c89c16a7c Name change: Change Cortex-M3 naming to ARMv7-M naming so support Cortex-M4 git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3846 42af7a65-404d-4744-a932-0658087f49c3		2011-08-05 21:57:49 +00:00
..
appconfig	Remove .built_always	2011-04-01 14:30:43 +00:00
bigfatstub.c	Missed uint32 type conversions	2009-12-17 18:47:48 +00:00
defconfig	Fix NT stype upper/lower case FAT 8.3 filename	2011-07-14 19:47:31 +00:00
Make.defs	Pass __KERNEL__ define (or not) to all makes to handle small differences in user-/kernel-builds	2011-04-03 18:42:33 +00:00
nuttx.ctx	Basic USART setup works	2009-10-11 19:52:20 +00:00
nuttx.dbi	Don't discard unused sections	2009-10-11 15:16:03 +00:00
nuttx.elf.ld	Don't discard unused sections	2009-10-11 15:16:03 +00:00
nuttx.rapp	Name change: Change Cortex-M3 naming to ARMv7-M naming so support Cortex-M4	2011-08-05 21:57:49 +00:00
nuttx.rdb	Basic USART setup works	2009-10-11 19:52:20 +00:00
nuttx.rprj	Started a RIDE project for STM32	2009-10-04 17:48:35 +00:00
README.txt	This project actually builds	2009-10-11 14:23:23 +00:00
setenv.sh	update	2009-10-11 13:59:52 +00:00
stm32-ld.sh	Don't discard unused sections	2009-10-11 15:16:03 +00:00
stm32-nuttx.ld	Don't discard unused sections	2009-10-11 15:16:03 +00:00

README.txt

README
------

This directory contains a simple RIDE7 project used to bring up the
STM3210E-EVAL board.  This project includes only the STM32 boot-up
code under arch/arm/src and configs/stm3210e-eval/src plus as little
additional environmental support as necessary.

bigfatstub.c

  The NuttX OS is not included in this project.  This file contains
  stubs for all of the NuttX entry points and this replaces NuttX

Make.defs, defconfig, setenv.h

  The first step to using this RIDE project is to build a compatible
  cygwin project.  This will set up of the directories and produce
  all of the necessary autogenerated files.

    cd tools
    ./configure.sh stm3210e-eva/RIDE
    cd ..
    . ./setenv.sh
    make

nuttx.*

  RIDE7 project files
  
stm32-nuttx.ld

  This is the linker script that replaces the RIDE7 linker script.

stm32-ld.sh

  This is a shell script that will use the RIDE7 tools to relink the
  NuttX binaries.  Useful because RIDE7 does not provide much linker
  output to see what is going on.