Dave Marples 5179fa9a64 drivers/serial/serial.c: Limit the number of times that the poll semaphore is incrmented.		2019-06-13 16:23:04 -06:00
..
Kconfig	arch/arm/src/common/up_lwl_console.c: Add support for a 'Lightweight Link' protocol between a target and debugger for use when you need a console but the target doesn't have a spare serial port or other available resource.	2019-06-03 07:31:17 -06:00
Kconfig-16550
Kconfig-lpuart	This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.	2019-05-30 13:45:36 -06:00
Kconfig-sci
Kconfig-uart
Kconfig-usart
lowconsole.c	Squashed commit of the following:	2019-05-21 18:57:54 -06:00
Make.defs	drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.	2019-04-24 12:11:40 -06:00
ptmx.c	Squashed commit of the following:	2019-05-21 18:57:54 -06:00
pty.c	Squashed commit of the following:	2019-05-21 18:57:54 -06:00
pty.h
serial_dma.c	drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.	2019-04-24 12:11:40 -06:00
serial_io.c
serial.c	drivers/serial/serial.c: Limit the number of times that the poll semaphore is incrmented.	2019-06-13 16:23:04 -06:00
tcdrain.c
uart_16550.c	drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.	2019-04-24 12:11:40 -06:00