Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Error: chrono_main.c:434:51: error: '%01ld' directive output may be truncated writing between 1 and 3 bytes into a region of size between 2 and 10 [-Werror=format-truncation=]
434 | snprintf(str, sizeof(str), "%02ld:%02ld:%01ld",
| ^~~~~
chrono_main.c:434:38: note: directive argument in the range [-21, 21]
434 | snprintf(str, sizeof(str), "%02ld:%02ld:%01ld",
| ^~~~~~~~~~~~~~~~~~~
chrono_main.c:434:11: note: 'snprintf' output between 8 and 18 bytes into a destination of size 16
434 | snprintf(str, sizeof(str), "%02ld:%02ld:%01ld",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
435 | min, sec, (priv->ts_end.tv_nsec / 100000000));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
chrono_main.c: In function 'chrono_main':
Error: chrono_main.c:396:11: error: 'strncpy' output truncated before terminating nul copying 7 bytes from a string of the same length [-Werror=stringop-truncation]
396 | strncpy(str, "00:00.0", 7);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Error: chrono_main.c:434:25: error: '%02ld' directive writing between 2 and 9 bytes into a region of size 8 [-Werror=format-overflow=]
434 | sprintf(str, "%02ld:%02ld:%01ld", min, sec,
| ^~~~~
chrono_main.c:434:24: note: directive argument in the range [-35791394, 35791394]
434 | sprintf(str, "%02ld:%02ld:%01ld", min, sec,
| ^~~~~~~~~~~~~~~~~~~
chrono_main.c:434:24: note: directive argument in the range [-59, 59]
chrono_main.c:434:24: note: directive argument in the range [-21, 21]
chrono_main.c:434:11: note: 'sprintf' output between 8 and 18 bytes into a destination of size 8
434 | sprintf(str, "%02ld:%02ld:%01ld", min, sec,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
435 | (priv->ts_end.tv_nsec / 100000000));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nsh_routecmds.c: In function 'cmd_delroute':
Error: nsh_routecmds.c:611:11: error: 'memset' forming offset [16, 27] is out of the bounds [0, 16] of object 'inaddr' with type 'union <anonymous>' [-Werror=array-bounds]
611 | memset(&inaddr.ipv6, 0, sizeof(struct sockaddr_in6));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nsh_routecmds.c:491:5: note: 'inaddr' declared here
491 | } inaddr;
| ^~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This example demonstrate swap between two valid images. Instructions
are available at readme.md file inside project directory.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
PCA9635 driver does not support neither need nor write operations.
The ioctl is supports PWMIOC_SETLED_BRIGHTNESS that is write like
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
commit 7354ab187ed701ae041b45a0a6603878ab9b165d and commit
1e2f06718103e7028809012a69b7ac932e9ae537 added code to skip all
remaining channels when the channel number is -1. This adds support for
testing that using the example app. The BL602 driver's first channel is
channel 0, so this also allows the example app to select the first
channel.
commit d8199fe460 changed Kconfig, but it
looks like pwm_main.c should have been changed too. This adds support
for the 5th and 6th channels to the code, and adds an error if more than
6 channels are configured.
commit 36d4bfa774 set a hostname to work
around getaddrinfo failing. getaddrinfo returns a non-zero value on
error, and there should be an early return after the error message is
printed.
test API:
void sched_note_string(FAR const char *buf);
void sched_note_dump(uint32_t module, uint8_t event,
FAR const void *buf, size_t len);
void sched_note_printf(FAR const char *fmt, ...) printflike(1, 2);
void sched_note_bprintf(uint32_t module, uint8_t event,
FAR const char *fmt, ...) printflike(3, 4);
https://github.com/apache/incubator-nuttx/pull/4963
suggestion:
1. add "&" after the command when running this example.
2. must enable SCHED_INSTRUMENTATION_DUMP, and that enable CONFIG_SYSTEM_TRACE can help you view log.
Modulo operation used to calculate digits after decimal point,
but if that result is <10, a leading zero wasn't added, giving a
wrong value.
Same as 34c7bec0dc
but on the example app.
when CONFIG_FB_OVERLAY=y, need set overlay=0,
otherwise the lcd driver doesn't know which
layer to get.
Signed-off-by: liushuai25 <liushuai25@xiaomi.com>
Fix some issues and update license to apache.
- Fails to open the video driver.
- Change format from YUV422 to RGB565,
and add captured image output to LCD.
- An application cannot exit by infinite loop.
- In video-only mode without capturing still images,
do not allocate capture memory for still images to
reduce the memory usage.
format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'off_t' {aka 'long long int'}
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt has submitted the SGA
RAF Research has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Sebastien Lorquet has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Max Holtzberg has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Abdelatif GUETTOUCHE has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Ken Pettit has submitted the ICLA
Gregory Nutt is has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Mateusz Szafoni has submitted the ICLA
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Laurent Latil has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Michal Lyszczek has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Alan Carvalho de Assis has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Laurent Latil has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Ken Pettit has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Max Holtzberg has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Mateusz Szafoni has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Sebastien Lorquet has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is has submitted the SGA
Alan Carvalho de Assis has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
following the idea of having a kill \<pid\> that will send SIGTERM default signal to the task,
this example of a "daemon leds" will handle SIGTERM in order to gracefully terminate itself.
It allows to restart this daemon after correctly terminating it.
No mode was set before the first read by the app.
The first time the app was run, it worked properly, reading
temperature and humidity on the first read(). But subsequent reads
returned humidity only since that was last mode set up.
Also, the ioctl read was returning invalid results.
Changes from v0.4.0
- add thread safety code
- add option to print function info (name) in logs
- abi/api stabilization
- bug fixes + increased reliability
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
---
v1 -> v2 [suggested by Brennan Ashton]
- fix path to embedlog_main.c in header comment
- change license from bsd3 to apache2.0
This provides an adaptor for using lvgl with the lcddev in
addition to the fbdev. As part of this it also fixes a compilation
error when fbdev was used with CONFIG_FB_UPDATE. There is also
a monitoring callback enabled for monitoring the performance
of the demo.
examples/qencoder/qe_main.c:
* main(): Call to printf() had "%d" but argument was
int32_t, leading to compiler warning. Change format
specifier to PRIi32 (suggested by Gregory Nutt).
since romfs can return the soft link with the kernel change:
commit 67ef70d460db4695b950208d861ff47d4a40bdb3
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Mon Jul 6 00:34:32 2020 +0800
vfs/dirread: Should return the same file type as lstat
by extend the possible value of d_type for the special file
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
should be CONFIG_EXAMPLES_PTYTEST_SERIALDEV, regression in commit:
commit 6ddbffd200
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sun Jan 3 23:50:50 2021 -0800
examples/pty_test: Remove O_NONBLOCK from open
to avoid the log storm:
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
to avoid the log storm:
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
...
Change-Id: I821743411c33b5412165f1e9020b6c9ce6c24660
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The examples/webserver app can be built in two modes:
(1) in standalone mode, or
(2) as a NSH built-in app.
When run in standalone mode, the webserver program is responsible for
bringing up the network (including DHCP if configured). Also, the
webserver program must never exit, so if httpd fails (i.e., if
httpd_listen() returns), webserver_main() goes into an endless loop.
When run as a NSH built-in app, network bring-up is the responsibility
of other processes and the webserver program assumes the network is
already properly configured when it starts. Also, if httpd_listen()
returns, the webserver program should terminate.
Prior to this change, the webserver program would *not* terminate,
even when running as a NSH built-in app. For example:
nsh> webserver &
webserver [6:100]
nsh> Starting webserver
nsh> kill -9 6
nsh> webserver_main: Still running
nsh> webserver_main: Still running
nsh> webserver_main: Still running
nsh> webserver_main: Still running
The line "webserver_main: Still running" would be forever printed
every 3 seconds, however httpd_listen() is no longer running and the
webserver is not functional.
This change makes the webserver play nicely when running as a NSH
built-in app. With this change applied:
nsh> webserver &
webserver [6:100]
nsh> Starting webserver
nsh> kill -9 6
nsh> webserver_main: Exiting
apps/examples/webserver/webserver_main.c:
* main(): Infer from CONFIG_NSH_BUILTIN_APPS if this is a
standalone program or a NSH built-in app. (See [1], where
similar logic was added to decide whether to do network bring-up
or not.) If standalone, run forever as before. If built-in
app, exit when httpd terminates.
References:
[1] Commit 3a21b0b222
wget is missing from some system (like macOS and Windows native),
it's better to use curl to simplify build environment.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
- Fix bug for multiple PWM outputs (CONFIG_PWM_MULTICHAN). Wrong define
was in use and only the information about the first channel was shown.
- Fix formatting (a few line breaks and spaces missing).
Because the configured signo may have the default action(e.g. SIGPIPE),
and then will generate the bad side effect before the caller wakeup.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since isascii isn't a standard defined function and then
may not exist in all cctype header file(e.g. libc++):
cctype_main.cxx: In function 'int cctype_main(int, char**)':
cctype_main.cxx:64:45: error: 'isascii' is not a member of 'std'; did you mean 'isascii'?
64 | std::isspace(i), std::isascii(i), std::isprint(i), std::isgraph(i),
| ^~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8c4fd5ccf120ae5a1566cd4d90695e47ffc30cad
2schar_main.c: In function 'parse_args':
i2schar_main.c:199:20: error: 'struct i2schar_state_s' has no member named 'rxcount'
199 | i2schar->rxcount = (uint32_t)value;
| ^~
i2schar_main.c:211:20: error: 'struct i2schar_state_s' has no member named 'txcount'
211 | i2schar->txcount = (uint32_t)value;
| ^~
i2schar_main.c: In function 'i2schar_main':
i2schar_main.c:276:16: error: 'struct i2schar_state_s' has no member named 'rxcount'
276 | g_i2schar.rxcount = CONFIG_EXAMPLES_I2SCHAR_RXBUFFERS;
| ^
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie85a9bc46516f44e4a286da3d40f1b02a2bbfde0
Still has a few errors because of include/nuttx/wireless/nrf24l01.h.
examples/nrf24l01_term/nrf24l01_term.c:125:33: error: Mixed case identifier found
examples/nrf24l01_term/nrf24l01_term.c:129:15: error: Mixed case identifier found
This makes LVGL use malloc/free to handle its memory (instead of
their own memory handling) and supports a tick interface by which
LVGL can ask NuttX the elapsed time, instead of having to periodically
"tick" LVGL internal time in a thread.
since it is wrong to close the builtin stream and specially note
https://pubs.opengroup.org/onlinepubs/9699919799/functions/fclose.html:
Since after the call to fclose() any use of stream results in
undefined behavior, fclose() should not be used on stdin, stdout,
or stderr except immediately before process termination (see XBD
Process Termination), so as to avoid triggering undefined behavior
in other standard interfaces that rely on these streams. If there
are any atexit() handlers registered by the application, such a
call to fclose() should not occur until the last handler is
finishing. Once fclose() has been used to close stdin, stdout, or
stderr, there is no standard way to reopen any of these streams.
and it is also unnecessary because the stream always get flushed.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit adds structures, modifies function prototypes, and renames data to support the future addition of IPv6 support. This commit does NOT add that IPv6, only the hooks for backward compatible future support.
This commit adds support to access an IPv4 Configuration file similar to the Linux dhpc.client ipfcg file. This version, tailored for deeply embedded systems supports several options to tailor the file and file access to different environments. It supports:
- Writable as well as read-only configuration files.
- ASCII human readable files as well as smaller binary files.
- It supports using character driver access to constrained media (such as EEPROM).
- Add examples/ipcfg to exercise IPv4 Configuration File support
The rest of errors are about cJSON identifiers:
wgetjson_main.c:181:2: error: Mixed case identifier found
wgetjson_main.c:183:9: error: Mixed case identifier found
wgetjson_main.c:186:37: error: Mixed case identifier found
wgetjson_main.c:190:12: error: Mixed case identifier found
wgetjson_main.c:191:6: error: Mixed case identifier found
wgetjson_main.c:203:39: error: Mixed case identifier found
wgetjson_main.c:256:36: error: Mixed case identifier found
wgetjson_main.c:283:2: error: Mixed case identifier found
wgetjson_main.c:286:9: error: Mixed case identifier found
wgetjson_main.c:289:37: error: Mixed case identifier found
wgetjson_main.c:295:6: error: Mixed case identifier found
fb_main.c: In function 'fb_main':
fb_main.c:473:15: warning: passing argument 1 of 'munmap' makes pointer from integer without a cast [-Wint-conversion]
473 | munmap(state.fd, state.fbmem);
| ~~~~~^~~
| |
| int
In file included from fb_main.c:43:
/home/archer/code/upload/incubator-nuttx/include/sys/mman.h:177:22: note: expected 'void *' but argument is of type 'int'
177 | int munmap(FAR void *start, size_t length);
| ~~~~~~^~~~~
fb_main.c:473:25: warning: passing argument 2 of 'munmap' makes integer from pointer without a cast [-Wint-conversion]
473 | munmap(state.fd, state.fbmem);
| ~~~~~^~~~~~
| |
| void *
In file included from fb_main.c:43:
/home/archer/code/upload/incubator-nuttx/include/sys/mman.h:177:36: note: expected 'size_t' {aka 'unsigned int'} but argument is of type 'void *'
177 | int munmap(FAR void *start, size_t length);
| ~~~~~~~^~~~~~
Signed-off-by: chao.an <anchao@xiaomi.com>
- Network initialization codes are not needed
with NSH_NETINIT config.
- Suppport commandline argument to set the URL to get.
- Change stack size to independent
since this config doesn't appear inside examples/helloxx/Kconfig anymore and
there is any c++ compiler can't construct the stack object as far as I know
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I0297d192df3beaa78ae7ee75f24ae51476bb30a9
since the test should work with either uClibc++ or libcxx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie6d7b1706314cbe82d4e89eb2d5c47ed36118ea4
since it is moved to the central place in nuttx side instead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I544d6110f1ca6460f7c82f970870aa9b1e7ab3dd
The camera example will take the specified number of pictures (default 10)
then will exit
To enable the example add the following line in your defconfig
EXAMPLES_CAMERA
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Adapt to the change in the main repo.
mallinfo is meant to be API compatible with Linux,
where it's provided by malloc.h.
(I think the API actually originated with System V. I don't
remember how it was there though. Anyway, I guess the
compatibility with Linux is more important than System V
these days.)
application just use BUTTONS ioctl and shouldn't take care the implementation detail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia4d615700de1ac17302ab9b6379340fb81e69d86
application just use USERLED ioctl and shouldn't take care the implementation detail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5b707d86db1bd96d85b6fed1d5a403584739f0d7
Update make dependency for elf/module/nxflat/posix_spawn/sotest/thttpd examples which make use of
mksymtab.sh. This could avoid them built twice in 'make depend' and 'make all' which would result
in file truncated build break. Now only build once by 'make all'.
Change-Id: I5d8f1ebbf73e3b12d7d2118f1f51b4233d0ed007
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
There were several places where default sector and buffer sizes of 2048 were changed to DEFAULT_TASK_STACKSIZE. This is not correct. This was noted by Xiao Xiang.