nuttx/sched/init/nx_start.c

/****************************************************************************
 * sched/init/nx_start.c
 *
 *   Copyright (C) 2007-2014, 2016, 2018 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <sys/types.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <assert.h>
#include <debug.h>

#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <nuttx/compiler.h>
#include <nuttx/sched.h>
#include <nuttx/fs/fs.h>
#include <nuttx/net/net.h>
#include <nuttx/lib/lib.h>
#include <nuttx/mm/iob.h>
#include <nuttx/mm/mm.h>
#include <nuttx/mm/shm.h>
#include <nuttx/kmalloc.h>
#include <nuttx/sched_note.h>
#include <nuttx/syslog/syslog.h>
#include <nuttx/binfmt/binfmt.h>
#include <nuttx/init.h>

#include "sched/sched.h"
#include "signal/signal.h"
#include "wdog/wdog.h"
#include "semaphore/semaphore.h"
#ifndef CONFIG_DISABLE_MQUEUE
#  include "mqueue/mqueue.h"
#endif
#ifndef CONFIG_DISABLE_PTHREAD
#  include "pthread/pthread.h"
#endif
#include "clock/clock.h"
#include "timer/timer.h"
#include "irq/irq.h"
#include "group/group.h"
#include "init/init.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

#ifdef CONFIG_SMP
/* This set of all CPUs */

#  define SCHED_ALL_CPUS         ((1 << CONFIG_SMP_NCPUS) - 1)
#endif /* CONFIG_SMP */

/****************************************************************************
 * Public Data
 ****************************************************************************/

/* Task Lists ***************************************************************/

/* The state of a task is indicated both by the task_state field of the TCB
 * and by a series of task lists.  All of these tasks lists are declared
 * below. Although it is not always necessary, most of these lists are
 * prioritized so that common list handling logic can be used (only the
 * g_readytorun, the g_pendingtasks, and the g_waitingforsemaphore lists
 * need to be prioritized).
 */

/* This is the list of all tasks that are ready to run.  This is a
 * prioritized list with head of the list holding the highest priority
 * (unassigned) task.  In the non-SMP case, the head of this list is the
 * currently active task and the tail of this list, the lowest priority
 * task, is always the IDLE task.
 */

volatile dq_queue_t g_readytorun;

#ifdef CONFIG_SMP
/* In order to support SMP, the function of the g_readytorun list changes,
 * The g_readytorun is still used but in the SMP case it will contain only:
 *
 *  - Only tasks/threads that are eligible to run, but not currently running,
 *    and
 *  - Tasks/threads that have not been assigned to a CPU.
 *
 * Otherwise, the TCB will be retained in an assigned task list,
 * g_assignedtasks.  As its name suggests, on 'g_assignedtasks queue for CPU
 * 'n' would contain only tasks/threads that are assigned to CPU 'n'.  Tasks/
 * threads would be assigned a particular CPU by one of two mechanisms:
 *
 *  - (Semi-)permanently through an RTOS interfaces such as
 *    pthread_attr_setaffinity(), or
 *  - Temporarily through scheduling logic when a previously unassigned task
 *    is made to run.
 *
 * Tasks/threads that are assigned to a CPU via an interface like
 * pthread_attr_setaffinity() would never go into the g_readytorun list, but
 * would only go into the g_assignedtasks[n] list for the CPU 'n' to which
 * the thread has been assigned.  Hence, the g_readytorun list would hold
 * only unassigned tasks/threads.
 *
 * Like the g_readytorun list in in non-SMP case, each g_assignedtask[] list
 * is prioritized:  The head of the list is the currently active task on this
 * CPU.  Tasks after the active task are ready-to-run and assigned to this
 * CPU. The tail of this assigned task list, the lowest priority task, is
 * always the CPU's IDLE task.
 */

volatile dq_queue_t g_assignedtasks[CONFIG_SMP_NCPUS];

/* g_running_tasks[] holds a references to the running task for each cpu.
 * It is valid only when up_interrupt_context() returns true.
 */

FAR struct tcb_s *g_running_tasks[CONFIG_SMP_NCPUS];

#else

FAR struct tcb_s *g_running_tasks[1];

#endif

/* This is the list of all tasks that are ready-to-run, but cannot be placed
 * in the g_readytorun list because:  (1) They are higher priority than the
 * currently active task at the head of the g_readytorun list, and (2) the
 * currently active task has disabled pre-emption.
 */

volatile dq_queue_t g_pendingtasks;

/* This is the list of all tasks that are blocked waiting for a semaphore */

volatile dq_queue_t g_waitingforsemaphore;

/* This is the list of all tasks that are blocked waiting for a signal */

volatile dq_queue_t g_waitingforsignal;

#ifndef CONFIG_DISABLE_MQUEUE
/* This is the list of all tasks that are blocked waiting for a message
 * queue to become non-empty.
 */

volatile dq_queue_t g_waitingformqnotempty;
#endif

#ifndef CONFIG_DISABLE_MQUEUE
/* This is the list of all tasks that are blocked waiting for a message
 * queue to become non-full.
 */

volatile dq_queue_t g_waitingformqnotfull;
#endif

#ifdef CONFIG_PAGING
/* This is the list of all tasks that are blocking waiting for a page fill */

volatile dq_queue_t g_waitingforfill;
#endif

#ifdef CONFIG_SIG_SIGSTOP_ACTION
/* This is the list of all tasks that have been stopped
 * via SIGSTOP or SIGTSTP
 */

volatile dq_queue_t g_stoppedtasks;
#endif

/* This the list of all tasks that have been initialized, but not yet
 * activated. NOTE:  This is the only list that is not prioritized.
 */

volatile dq_queue_t g_inactivetasks;

/* This is the value of the last process ID assigned to a task */

volatile pid_t g_lastpid;

/* The following hash table is used for two things:
 *
 * 1. This hash table greatly speeds the determination of a new unique
 *    process ID for a task, and
 * 2. Is used to quickly map a process ID into a TCB.
 *
 * It has the side effects of using more memory and limiting
 * the number of tasks to CONFIG_MAX_TASKS.
 */

struct pidhash_s g_pidhash[CONFIG_MAX_TASKS];

/* This is a table of task lists.  This table is indexed by the task stat
 * enumeration type (tstate_t) and provides a pointer to the associated
 * static task list (if there is one) as well as a a set of attribute flags
 * indicating properties of the list, for example, if the list is an
 * ordered list or not.
 */

const struct tasklist_s g_tasklisttable[NUM_TASK_STATES] =
{
  {                                              /* TSTATE_TASK_INVALID */
    NULL,
    0
  },
  {                                              /* TSTATE_TASK_PENDING */
    &g_pendingtasks,
    TLIST_ATTR_PRIORITIZED
  },
#ifdef CONFIG_SMP
  {                                              /* TSTATE_TASK_READYTORUN */
    &g_readytorun,
    TLIST_ATTR_PRIORITIZED
  },
  {                                              /* TSTATE_TASK_ASSIGNED */
    g_assignedtasks,
    TLIST_ATTR_PRIORITIZED | TLIST_ATTR_INDEXED | TLIST_ATTR_RUNNABLE
  },
  {                                              /* TSTATE_TASK_RUNNING */
    g_assignedtasks,
    TLIST_ATTR_PRIORITIZED | TLIST_ATTR_INDEXED | TLIST_ATTR_RUNNABLE
  },
#else
  {                                              /* TSTATE_TASK_READYTORUN */
    &g_readytorun,
    TLIST_ATTR_PRIORITIZED | TLIST_ATTR_RUNNABLE
  },
  {                                              /* TSTATE_TASK_RUNNING */
    &g_readytorun,
    TLIST_ATTR_PRIORITIZED | TLIST_ATTR_RUNNABLE
  },
#endif
  {                                              /* TSTATE_TASK_INACTIVE */
    &g_inactivetasks,
    0
  },
  {                                              /* TSTATE_WAIT_SEM */
    &g_waitingforsemaphore,
    TLIST_ATTR_PRIORITIZED
  },
  {                                              /* TSTATE_WAIT_SIG */
    &g_waitingforsignal,
    0
  }
#ifndef CONFIG_DISABLE_MQUEUE
  ,
  {                                              /* TSTATE_WAIT_MQNOTEMPTY */
    &g_waitingformqnotempty,
    TLIST_ATTR_PRIORITIZED
  },
  {                                              /* TSTATE_WAIT_MQNOTFULL */
    &g_waitingformqnotfull,
    TLIST_ATTR_PRIORITIZED
  }
#endif
#ifdef CONFIG_PAGING
  ,
  {                                              /* TSTATE_WAIT_PAGEFILL */
    &g_waitingforfill,
    TLIST_ATTR_PRIORITIZED
  }
#endif
#ifdef CONFIG_SIG_SIGSTOP_ACTION
  ,
  {                                              /* TSTATE_TASK_STOPPED */
    &g_stoppedtasks,
    0                                            /* See tcb->prev_state */
  },
#endif
};

/* This is the current initialization state.  The level of initialization
 * is only important early in the start-up sequence when certain OS or
 * hardware resources may not yet be available to the kernel logic.
 */

uint8_t g_nx_initstate;  /* See enum nx_initstate_e */

/****************************************************************************
 * Private Data
 ****************************************************************************/

/* This is an array of task control block (TCB) for the IDLE thread of each
 * CPU.  For the non-SMP case, this is a a single TCB; For the SMP case,
 * there is one TCB per CPU.  NOTE: The system boots on CPU0 into the IDLE
 * task.  The IDLE task later starts the other CPUs and spawns the user
 * initialization task.  That user initialization task is responsible for
 * bringing up the rest of the system.
 */

#ifdef CONFIG_SMP
static struct task_tcb_s g_idletcb[CONFIG_SMP_NCPUS];
#else
static struct task_tcb_s g_idletcb[1];
#endif

/* This is the name of the idle task */

#if CONFIG_TASK_NAME_SIZE <= 0 || !defined(CONFIG_SMP)
#ifdef CONFIG_SMP
static const char g_idlename[] = "CPU Idle";
#else
static const char g_idlename[] = "Idle Task";
#endif
#endif

/* This the IDLE idle threads argument list.  NOTE: Normally the argument
 * list is created on the stack prior to starting the task.  We have to
 * do things s little differently here for the IDLE tasks.
 */

#ifdef CONFIG_SMP
static FAR char *g_idleargv[CONFIG_SMP_NCPUS][2];
#else
static FAR char *g_idleargv[1][2];
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nx_start
 *
 * Description:
 *   This function is called to initialize the operating system and to spawn
 *   the user initialization thread of execution.  This is the initial entry
 *   point into NuttX
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   Does not return.
 *
 ****************************************************************************/

void nx_start(void)
{
  int cpu = 0;
  int i;

  sinfo("Entry\n");

  /* Boot up is complete */

  g_nx_initstate = OSINIT_BOOT;

  /* Initialize RTOS Data ***************************************************/

  /* Initialize all task lists */

  dq_init(&g_readytorun);
  dq_init(&g_pendingtasks);
  dq_init(&g_waitingforsemaphore);
  dq_init(&g_waitingforsignal);
#ifndef CONFIG_DISABLE_MQUEUE
  dq_init(&g_waitingformqnotfull);
  dq_init(&g_waitingformqnotempty);
#endif
#ifdef CONFIG_PAGING
  dq_init(&g_waitingforfill);
#endif
#ifdef CONFIG_SIG_SIGSTOP_ACTION
  dq_init(&g_stoppedtasks);
#endif
  dq_init(&g_inactivetasks);

#ifdef CONFIG_SMP
  for (i = 0; i < CONFIG_SMP_NCPUS; i++)
    {
      dq_init(&g_assignedtasks[i]);
    }
#endif

  /* Initialize the logic that determine unique process IDs. */

  g_lastpid = 0;
  for (i = 0; i < CONFIG_MAX_TASKS; i++)
    {
      g_pidhash[i].tcb = NULL;
      g_pidhash[i].pid = INVALID_PROCESS_ID;
    }

  /* Initialize the IDLE task TCB *******************************************/

#ifdef CONFIG_SMP
  for (cpu = 0; cpu < CONFIG_SMP_NCPUS; cpu++, g_lastpid++)
#endif
    {
      FAR dq_queue_t *tasklist;
      int hashndx;

      /* Assign the process ID(s) of ZERO to the idle task(s) */

      hashndx                = PIDHASH(g_lastpid);
      g_pidhash[hashndx].tcb = &g_idletcb[cpu].cmn;
      g_pidhash[hashndx].pid = g_lastpid;

      /* Initialize a TCB for this thread of execution.  NOTE:  The default
       * value for most components of the g_idletcb are zero.  The entire
       * structure is set to zero.  Then only the (potentially) non-zero
       * elements are initialized. NOTE:  The idle task is the only task in
       * that has pid == 0 and sched_priority == 0.
       */

      memset((void *)&g_idletcb[cpu], 0, sizeof(struct task_tcb_s));
      g_idletcb[cpu].cmn.pid        = g_lastpid;
      g_idletcb[cpu].cmn.task_state = TSTATE_TASK_RUNNING;

      /* Set the entry point.  This is only for debug purposes.  NOTE: that
       * the start_t entry point is not saved.  That is acceptable, however,
       * because it can be used only for restarting a task: The IDLE task
       * cannot be restarted.
       */

#ifdef CONFIG_SMP
      if (cpu > 0)
        {
          g_idletcb[cpu].cmn.start      = nx_idle_trampoline;
          g_idletcb[cpu].cmn.entry.main = (main_t)nx_idle_trampoline;
        }
      else
#endif
        {
          g_idletcb[cpu].cmn.start      = nx_start;
          g_idletcb[cpu].cmn.entry.main = (main_t)nx_start;
        }

      /* Set the task flags to indicate that this is a kernel thread and, if
       * configured for SMP, that this task is locked to this CPU.
       */

#ifdef CONFIG_SMP
      g_idletcb[cpu].cmn.flags = (TCB_FLAG_TTYPE_KERNEL |
                                  TCB_FLAG_NONCANCELABLE |
                                  TCB_FLAG_CPU_LOCKED);
      g_idletcb[cpu].cmn.cpu   = cpu;
#else
      g_idletcb[cpu].cmn.flags = (TCB_FLAG_TTYPE_KERNEL |
                                  TCB_FLAG_NONCANCELABLE);
#endif

#ifdef CONFIG_SMP
      /* Set the affinity mask to allow the thread to run on all CPUs.  No,
       * this IDLE thread can only run on its assigned CPU.  That is
       * enforced by the TCB_FLAG_CPU_LOCKED which overrides the affinity
       * mask.  This is essential because all tasks inherit the affinity
       * mask from their parent and, ultimately, the parent of all tasks is
       * the IDLE task.
       */

      g_idletcb[cpu].cmn.affinity = SCHED_ALL_CPUS;
#endif

#if CONFIG_TASK_NAME_SIZE > 0
      /* Set the IDLE task name */

#  ifdef CONFIG_SMP
      snprintf(g_idletcb[cpu].cmn.name, CONFIG_TASK_NAME_SIZE, "CPU%d IDLE",
               cpu);
#  else
      strncpy(g_idletcb[cpu].cmn.name, g_idlename, CONFIG_TASK_NAME_SIZE);
      g_idletcb[cpu].cmn.name[CONFIG_TASK_NAME_SIZE] = '\0';
#  endif
#endif

      /* Configure the task name in the argument list.  The IDLE task does
       * not really have an argument list, but this name is still useful
       * for things like the NSH PS command.
       *
       * In the kernel mode build, the arguments are saved on the task's
       * stack and there is no support that yet.
       */

#if CONFIG_TASK_NAME_SIZE > 0
      g_idleargv[cpu][0]  = g_idletcb[cpu].cmn.name;
#else
      g_idleargv[cpu][0]  = (FAR char *)g_idlename;
#endif /* CONFIG_TASK_NAME_SIZE */
      g_idleargv[cpu][1]  = NULL;
      g_idletcb[cpu].argv = &g_idleargv[cpu][0];

      /* Then add the idle task's TCB to the head of the current ready to
       * run list.
       */

#ifdef CONFIG_SMP
      tasklist = TLIST_HEAD(TSTATE_TASK_RUNNING, cpu);
#else
      tasklist = TLIST_HEAD(TSTATE_TASK_RUNNING);
#endif
      dq_addfirst((FAR dq_entry_t *)&g_idletcb[cpu], tasklist);

      /* Mark the idle task as the running task */

      g_running_tasks[cpu] = &g_idletcb[cpu].cmn;

      /* Initialize the 1st processor-specific portion of the TCB
       * Note: other idle thread get initialized in nx_smpstart
       */

      if (cpu == 0)
        {
          up_initial_state(&g_idletcb[cpu].cmn);
        }
    }

  /* Task lists are initialized */

  g_nx_initstate = OSINIT_TASKLISTS;

  /* Initialize RTOS facilities *********************************************/

  /* Initialize the semaphore facility.  This has to be done very early
   * because many subsystems depend upon fully functional semaphores.
   */

  nxsem_initialize();

#if defined(MM_KERNEL_USRHEAP_INIT) || defined(CONFIG_MM_KERNEL_HEAP) || \
    defined(CONFIG_MM_PGALLOC)
  /* Initialize the memory manager */

    {
      FAR void *heap_start;
      size_t heap_size;

#ifdef MM_KERNEL_USRHEAP_INIT
      /* Get the user-mode heap from the platform specific code and configure
       * the user-mode memory allocator.
       */

      up_allocate_heap(&heap_start, &heap_size);
      kumm_initialize(heap_start, heap_size);
#endif

#ifdef CONFIG_MM_KERNEL_HEAP
      /* Get the kernel-mode heap from the platform specific code and
       * configure the kernel-mode memory allocator.
       */

      up_allocate_kheap(&heap_start, &heap_size);
      kmm_initialize(heap_start, heap_size);
#endif

#ifdef CONFIG_MM_PGALLOC
      /* If there is a page allocator in the configuration, then get the page
       * heap information from the platform-specific code and configure the
       * page allocator.
       */

      up_allocate_pgheap(&heap_start, &heap_size);
      mm_pginitialize(heap_start, heap_size);
#endif
    }
#endif

#ifdef CONFIG_ARCH_USE_MODULE_TEXT
  up_module_text_init();
#endif

#ifdef CONFIG_MM_IOB
  /* Initialize IO buffering */

  iob_initialize();
#endif

  /* The memory manager is available */

  g_nx_initstate = OSINIT_MEMORY;

#if defined(CONFIG_SCHED_HAVE_PARENT) && defined(CONFIG_SCHED_CHILD_STATUS)
  /* Initialize tasking data structures */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (task_initialize != NULL)
#endif
    {
      task_initialize();
    }
#endif

  /* Initialize the file system (needed to support device drivers) */

  fs_initialize();

  /* Initialize the interrupt handling subsystem (if included) */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (irq_initialize != NULL)
#endif
    {
      irq_initialize();
    }

  /* Initialize the watchdog facility (if included in the link) */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (wd_initialize != NULL)
#endif
    {
      wd_initialize();
    }

  /* Initialize the POSIX timer facility (if included in the link) */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (clock_initialize != NULL)
#endif
    {
      clock_initialize();
    }

#ifndef CONFIG_DISABLE_POSIX_TIMERS
#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (timer_initialize != NULL)
#endif
    {
      timer_initialize();
    }
#endif

  /* Initialize the signal facility (if in link) */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (nxsig_initialize != NULL)
#endif
    {
      nxsig_initialize();
    }

#ifndef CONFIG_DISABLE_MQUEUE
  /* Initialize the named message queue facility (if in link) */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (nxmq_initialize != NULL)
#endif
    {
      nxmq_initialize();
    }
#endif

#ifndef CONFIG_DISABLE_PTHREAD
  /* Initialize the thread-specific data facility (if in link) */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (pthread_initialize != NULL)
#endif
    {
      pthread_initialize();
    }
#endif

#ifdef CONFIG_NET
  /* Initialize the networking system */

  net_initialize();
#endif

  /* Initialize Hardware Facilities *****************************************/

  /* The processor specific details of running the operating system
   * will be handled here.  Such things as setting up interrupt
   * service routines and starting the clock are some of the things
   * that are different for each  processor and hardware platform.
   */

  up_initialize();

#ifdef CONFIG_BOARD_EARLY_INITIALIZE
  /* Call the board-specific up_initialize() extension to support
   * early initialization of board-specific drivers and resources
   * that cannot wait until board_late_initialize.
   */

  board_early_initialize();
#endif

  /* Hardware resources are now available */

  g_nx_initstate = OSINIT_HARDWARE;

  /* Setup for Multi-Tasking ************************************************/

#ifdef CONFIG_MM_SHM
  /* Initialize shared memory support */

  shm_initialize();
#endif

  /* Initialize the C libraries.  This is done last because the libraries
   * may depend on the above.
   */

  lib_initialize();

#ifndef CONFIG_BINFMT_DISABLE
  /* Initialize the binfmt system */

  binfmt_initialize();
#endif

  /* IDLE Group Initialization **********************************************/

  /* Announce that the CPU0 IDLE task has started */

  sched_note_start(&g_idletcb[0].cmn);

#ifdef CONFIG_SMP
  /* Initialize the IDLE group for the IDLE task of each CPU */

  for (cpu = 0; cpu < CONFIG_SMP_NCPUS; cpu++)
#endif
    {
      /* Allocate the IDLE group */

      DEBUGVERIFY(group_allocate(&g_idletcb[cpu], g_idletcb[cpu].cmn.flags));

#ifdef CONFIG_SMP
      if (cpu > 0)
        {
          /* Clone stdout, stderr, stdin from the CPU0 IDLE task. */

          DEBUGVERIFY(group_setuptaskfiles(&g_idletcb[cpu]));
        }
      else
#endif
        {
          /* Create stdout, stderr, stdin on the CPU0 IDLE task.  These
           * will be inherited by all of the threads created by the CPU0
           * IDLE task.
           */

          DEBUGVERIFY(group_setupidlefiles(&g_idletcb[cpu]));
        }

      /* Complete initialization of the IDLE group.  Suppress retention
       * of child status in the IDLE group.
       */

      DEBUGVERIFY(group_initialize(&g_idletcb[cpu]));
      g_idletcb[cpu].cmn.group->tg_flags = GROUP_FLAG_NOCLDWAIT;
    }

  /* Start SYSLOG ***********************************************************/

  /* Late initialization of the system logging device.  Some SYSLOG channel
   * must be initialized late in the initialization sequence because it may
   * depend on having IDLE task file structures setup.
   */

  syslog_initialize();

#ifdef CONFIG_SMP
  /* Start all CPUs *********************************************************/

  /* A few basic sanity checks */

  DEBUGASSERT(this_cpu() == 0 && CONFIG_MAX_TASKS > CONFIG_SMP_NCPUS);

  /* Take the memory manager semaphore on this CPU so that it will not be
   * available on the other CPUs until we have finished initialization.
   */

  DEBUGVERIFY(kmm_trysemaphore());

  /* Then start the other CPUs */

  DEBUGVERIFY(nx_smp_start());

#endif /* CONFIG_SMP */

  /* Bring Up the System ****************************************************/

  /* The OS is fully initialized and we are beginning multi-tasking */

  g_nx_initstate = OSINIT_OSREADY;

  /* Create initial tasks and bring-up the system */

  DEBUGVERIFY(nx_bringup());

#ifdef CONFIG_SMP
  /* Let other threads have access to the memory manager */

  kmm_givesemaphore();

#endif /* CONFIG_SMP */

  /* The IDLE Loop **********************************************************/

  /* When control is return to this point, the system is idle. */

  sinfo("CPU0: Beginning Idle Loop\n");
  for (; ; )
    {
      /* Perform any processor-specific idle state operations */

      up_idle();
    }
}