nuttx/boards/arm/imxrt/imxrt1050-evk/src/Makefile

70 lines
1.8 KiB
Makefile
Raw Normal View History

This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
############################################################################
Merged in alinjerpelea/nuttx (pull request #967) group boards based on chip * a1x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * am335x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * scx56xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dm320: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imx6: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kinetis: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kl: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc17xx_40xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc214x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc2378: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc31xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc43xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc54xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max326xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxart: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nuc1xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam34: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd2l2: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd5e5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samv7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f0l0g0: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32h7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * str71x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tiva: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * p112: typo fix this boars is a z80 board and was moved to the wrong arch Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at32uc3: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at90usb: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: atmega: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: mcs92s12ne64: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mz: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: lm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: mor1kx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: m32262f8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: sh7032: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: gap8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: nr5m100: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: sim: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: qemu: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: esp32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: z16f2811: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: ez80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z180: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: update tools for boards based on chip This patch updates only the linux tools Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pcduino-a10: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * beaglebone-black: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471evm: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * spresense: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ntosd-dm320: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32-g8xx-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32gg-stk3700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-efm32g880f128-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sabre-6quad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1050-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1060-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k28f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k64f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k66f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kwikstik-k40: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-3.x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k60n512: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k64f120m: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl25z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl26z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-lc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lincoln60: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-devkit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-quickstart: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc1768: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbed: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcb1700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc1766stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * open1788: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pnev5180b: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * u-blox-c027: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zkit-arm-1769: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcu123-lpc214x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc2378: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3152: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc-h3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * bambino-200e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4330-xplorer: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-evb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4370-link2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc54628: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max32660-evsys: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52-generic: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nutiny-nuc120: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-due: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-sam3x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam3u-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4cmp-db: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4e-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4l-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained-pro: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d2-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3x-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d4-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd20-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * saml21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * metro-m4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same70-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same71-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * axoloti: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * clicker2-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * cloudctrl: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * fire-stm32v2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hymini-stm32v: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * maple: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mikroe-stm32f4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f103rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f207zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f302r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303ze: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f334r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f410rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f446re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f4x1re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-1152re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-e407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h405: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p207: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * omnibusf4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * photon: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * shenzou: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3210e-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3220g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3240g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32_tiny: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32butterfly2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f103-minimum: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f334-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f3discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f411e-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f429i-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f4discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32ldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32vldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * viewtool-stm32f107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l072z-lrwan1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f072rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f091rc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f071rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l073rz: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f051-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f072-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-144: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-h743zi: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l475e-iot01a: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432kc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l476rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l496zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476-mdk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476vg-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4r9ai-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-strp711: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dk-tm4c129x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * eagle100: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ekk-lm3s9b96: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1310: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1312r1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6432-s2e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6965-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s8962-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4f120-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c123g-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c1294-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-tms57004: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570ls31x-usb-kit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4500-relax: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: typo fix add missing tools/oocd.sh Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-07 22:49:39 +02:00
# boards/arm/imxrt/imxrt1050-evk/src/Makefile
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
#
# http://www.apache.org/licenses/LICENSE-2.0
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
#
############################################################################
include $(TOPDIR)/Make.defs
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
CSRCS = imxrt_boot.c imxrt_flexspi_nor_boot.c imxrt_flexspi_nor_flash.c
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
ifeq ($(CONFIG_IMXRT_SDRAMC),y)
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
CSRCS += imxrt_sdram.c
endif
ifeq ($(CONFIG_BOARDCTL),y)
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
CSRCS += imxrt_appinit.c imxrt_bringup.c
else ifeq ($(CONFIG_BOARD_LATE_INITIALIZE),y)
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 17:31:09 +02:00
CSRCS += imxrt_bringup.c
endif
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += imxrt_autoleds.c
else
CSRCS += imxrt_userleds.c
endif
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += imxrt_buttons.c
endif
This commit adds an i.MX RT Ethernet drivers. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add cache operations to permit the Ethernet driver to work with the D-Cache enabled, at least in write-through mode. Author: Jake Choy <jakearcx@gmail.com> arch/arm/src/imxrt: The Ethernet driver is now functional, at least with the D-Cache off. The final fix was for the reference clock that needs to be forced to provide and input (SION). Author: Gregory Nutt <gnutt@nuttx.org> Fix trivial coding standard issue. configs/imxrt1050-evk: Correct CONFIG_RAM_SIZE in all configurations (5Kb not 5Mb). I don't believe that CONFIG_RAM_SIZE is used at all in the i.MX RT so this is as grievous an error as it seems. Also enabled built-in applications in all NSH configurations. arch/arm/src/imxrt/imxrt_enet.c: Trivial and cosmetic. Cosmetic update to comments. arch/arm/src/imxrt/imxrt_enet.c: Oops.. put the PHY interrupt init hooks in the wrong place. That is a one-time initialization but imxrt_initphy() is called on each ifup. arch/arm/src/imxrt/imxrt_enet.c: Add hooks for board-specific PHY initialization (not yet needed, but there when needed). Remove dangling white space at the end of lines arch/arm/src/imxrt/Kconfig: Add option for board-specific PHY initialization. configs/imxrt1050-evk/src: Add basic logic to support PHY interrupts. Incomplete.. needs additional support in imxrt_enet.c to 1. call to initialize PHY interrupt features, and 2. IOCTL commands to access PHY registers. configs/imxrt1050-evk/README.txt: Trivial update. configs/imxrt1050-evk/netnsh/defconfig: Disable LED support because pins conflict with PHY. Enable device statists. Enable NSH ifup and ifdown commmands arch/arm/src/imxrt: Use macros in imxrt_periphclks.h vs. direct CCM CCGR accesses in Ethernet driver. arch/arm/src/imxrt: Misc changes for a clean compilation of Ethernet deriver. configs/imxrt1050-evk/netnsh: Add an NSH configuration for testing Ethernet. Author: Jake Choy <jakearcx@gmail.com> arch/arm/src/imxrt: Initial WIP Ethernet driver.
2018-05-25 17:36:23 +02:00
ifeq ($(CONFIG_IMXRT_ENET),y)
CSRCS += imxrt_ethernet.c
endif
ifeq ($(CONFIG_IMXRT_LPSPI),y)
CSRCS += imxrt_spi.c
endif
ifeq ($(CONFIG_IMXRT_LCD),y)
CSRCS += imxrt_lcd.c
endif
ifeq ($(CONFIG_MMCSD_SPI),y)
CSRCS += imxrt_mmcsd_spi.c
endif
ifeq ($(CONFIG_DEV_GPIO),y)
CSRCS += imxrt_gpio.c
endif
ifeq ($(CONFIG_IMXRT1050_EVK_SDRAM),y)
CSRCS += imxrt_sdram_ini_dcd.c
endif
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
include $(TOPDIR)/boards/Board.mk