2007-03-23 03:24:38 +01:00
|
|
|
|
Board-Specific Configurations
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
2015-06-29 21:08:42 +02:00
|
|
|
|
|
|
|
|
|
|
This directory contains the board support for logic for all boards supported
|
|
|
|
|
|
by NuttX. This directory is retained in a separate repository and is a Sub-
|
|
|
|
|
|
Module of NuttX and will appear as nuttx/configs when the NuttX repository
|
|
|
|
|
|
is cloned.
|
|
|
|
|
|
|
|
|
|
|
|
The nuttx/configs directory is a part of the internal OS. It there should
|
2015-06-29 21:22:08 +02:00
|
|
|
|
contain only OS bring-up logic and driver initialization logic. THERE SHOULD
|
|
|
|
|
|
BE NO APPLICATION CALLABLE LOGIC IN THIS DIRECTORY.
|
2015-06-29 21:08:42 +02:00
|
|
|
|
|
|
|
|
|
|
If you have board-specific, application callable logic, that logic should not
|
|
|
|
|
|
go here. Please consider using a sub-directory under apps/platform instead.
|
|
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
Table of Contents
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
o Board-Specific Configurations
|
|
|
|
|
|
o Summary of Files
|
2013-04-23 01:36:27 +02:00
|
|
|
|
o Configuration Variables
|
2013-12-21 01:25:36 +01:00
|
|
|
|
o Supported Boards
|
2007-03-23 03:24:38 +01:00
|
|
|
|
o Configuring NuttX
|
2012-09-01 17:33:33 +02:00
|
|
|
|
o Building Symbol Tables
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
|
|
|
|
|
Board-Specific Configurations
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
2007-03-27 23:27:41 +02:00
|
|
|
|
The NuttX configuration consists of:
|
|
|
|
|
|
|
|
|
|
|
|
o Processor architecture specific files. These are the files contained
|
|
|
|
|
|
in the arch/<arch-name>/ directory.
|
|
|
|
|
|
|
|
|
|
|
|
o Chip/SoC specific files. Each processor processor architecture
|
|
|
|
|
|
is embedded in chip or System-on-a-Chip (SoC) architecture. The
|
|
|
|
|
|
full chip architecture includes the processor architecture plus
|
|
|
|
|
|
chip-specific interrupt logic, general purpose I/O (GIO) logic, and
|
|
|
|
|
|
specialized, internal peripherals (such as UARTs, USB, etc.).
|
|
|
|
|
|
|
|
|
|
|
|
These chip-specific files are contained within chip-specific
|
|
|
|
|
|
sub-directories in the arch/<arch-name>/ directory and are selected
|
|
|
|
|
|
via the CONFIG_ARCH_name selection
|
|
|
|
|
|
|
|
|
|
|
|
o Board specific files. In order to be usable, the chip must be
|
|
|
|
|
|
contained in a board environment. The board configuration defines
|
|
|
|
|
|
additional properties of the board including such things as
|
|
|
|
|
|
peripheral LEDs, external peripherals (such as network, USB, etc.).
|
|
|
|
|
|
|
|
|
|
|
|
These board-specific configuration files can be found in the
|
|
|
|
|
|
configs/<board-name>/ sub-directories and are discussed in this
|
2008-02-07 15:41:11 +01:00
|
|
|
|
README. Additional configuration information maybe available in
|
|
|
|
|
|
board-specific configs/<board-name>/README.txt files.
|
2007-03-27 23:27:41 +02:00
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
The configs/ subdirectory contains configuration data for each board. These
|
|
|
|
|
|
board-specific configurations plus the architecture-specific configurations in
|
2007-03-27 23:27:41 +02:00
|
|
|
|
the arch/ subdirectory completely define a customized port of NuttX.
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
|
|
|
|
|
Directory Structure
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
The configs directory contains board specific configurationlogic. Each
|
|
|
|
|
|
board must provide a subdirectory <board-name> under configs/ with the
|
|
|
|
|
|
following characteristics:
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
<board-name>
|
|
|
|
|
|
|-- README.txt
|
|
|
|
|
|
|-- include/
|
|
|
|
|
|
| `-- (board-specific header files)
|
|
|
|
|
|
|-- src/
|
|
|
|
|
|
| |-- Makefile
|
|
|
|
|
|
| `-- (board-specific source files)
|
|
|
|
|
|
|-- <config1-dir>
|
|
|
|
|
|
| |-- Make.defs
|
|
|
|
|
|
| |-- defconfig
|
|
|
|
|
|
| `-- setenv.sh
|
|
|
|
|
|
|-- <config2-dir>
|
|
|
|
|
|
| |-- Make.defs
|
|
|
|
|
|
| |-- defconfig
|
|
|
|
|
|
| `-- setenv.sh
|
|
|
|
|
|
...
|
2011-03-18 18:22:50 +01:00
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
Summary of Files
|
|
|
|
|
|
^^^^^^^^^^^^^^^^
|
2007-03-26 18:47:17 +02:00
|
|
|
|
|
2010-10-04 17:24:20 +02:00
|
|
|
|
README.txt -- This text file provides additional information unique to
|
|
|
|
|
|
each board configuration sub-directory.
|
|
|
|
|
|
|
2007-03-27 00:14:28 +02:00
|
|
|
|
include/ -- This directory contains board specific header files. This
|
2007-03-26 18:47:17 +02:00
|
|
|
|
directory will be linked as include/arch/board at configuration time and
|
|
|
|
|
|
can be included via '#include <arch/board/header.h>'. These header file
|
|
|
|
|
|
can only be included by files in arch/<arch-name>include/ and
|
|
|
|
|
|
arch/<arch-name>/src
|
2007-03-27 00:14:28 +02:00
|
|
|
|
|
|
|
|
|
|
src/ -- This directory contains board specific drivers. This
|
|
|
|
|
|
directory will be linked as arch/<arch-name>/src/board at configuration
|
|
|
|
|
|
time and will be integrated into the build system.
|
|
|
|
|
|
|
|
|
|
|
|
src/Makefile -- This makefile will be invoked to build the board specific
|
|
|
|
|
|
drivers. It must support the following targets: libext$(LIBEXT), clean,
|
|
|
|
|
|
and distclean.
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2008-02-07 15:41:11 +01:00
|
|
|
|
A board may have various different configurations using these common source
|
|
|
|
|
|
files. Each board configuration is described by three files: Make.defs,
|
|
|
|
|
|
defconfig, and setenv.sh. Typically, each set of configuration files is
|
|
|
|
|
|
retained in a separate configuration sub-directory (<config1-dir>,
|
|
|
|
|
|
<config2-dir>, .. in the above diagram).
|
|
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
Make.defs -- This makefile fragment provides architecture and
|
|
|
|
|
|
tool-specific build options. It will be included by all other
|
|
|
|
|
|
makefiles in the build (once it is installed). This make fragment
|
|
|
|
|
|
should define:
|
|
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Tools: CC, LD, AR, NM, OBJCOPY, OBJDUMP
|
|
|
|
|
|
Tool options: CFLAGS, LDFLAGS
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
|
|
|
|
|
When this makefile fragment runs, it will be passed TOPDIR which
|
|
|
|
|
|
is the path to the root directory of the build. This makefile
|
2012-11-15 18:43:29 +01:00
|
|
|
|
fragment should include:
|
|
|
|
|
|
|
|
|
|
|
|
$(TOPDIR)/.config : Nuttx configuration
|
|
|
|
|
|
$(TOPDIR)/tools/Config.mk : Common definitions
|
|
|
|
|
|
|
|
|
|
|
|
Definitions in the Make.defs file probably depend on some of the
|
|
|
|
|
|
settings in the .config file. For example, the CFLAGS will most likely be
|
2007-03-23 03:24:38 +01:00
|
|
|
|
different if CONFIG_DEBUG=y.
|
|
|
|
|
|
|
2012-11-15 18:43:29 +01:00
|
|
|
|
The included tools/Config.mk file contains additional definitions that may
|
|
|
|
|
|
be overriden in the architecture-specific Make.defs file as necessary:
|
|
|
|
|
|
|
|
|
|
|
|
COMPILE, ASSEMBLE, ARCHIVE, CLEAN, and MKDEP macros
|
|
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
defconfig -- This is a configuration file similar to the Linux
|
2008-02-07 15:41:11 +01:00
|
|
|
|
configuration file. In contains variable/value pairs like:
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
CONFIG_VARIABLE=value
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
|
|
|
|
|
This configuration file will be used at build time:
|
|
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
(1) as a makefile fragment included in other makefiles, and
|
|
|
|
|
|
(2) to generate include/nuttx/config.h which is included by
|
|
|
|
|
|
most C files in the system.
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2013-04-23 01:36:27 +02:00
|
|
|
|
setenv.sh -- This is a script that you can include that will be installed at
|
|
|
|
|
|
the toplevel of the directory structure and can be sourced to set any
|
|
|
|
|
|
necessary environment variables. You will most likely have to customize the
|
|
|
|
|
|
default setenv.sh script in order for it to work correctly in your
|
|
|
|
|
|
environment.
|
|
|
|
|
|
|
|
|
|
|
|
Configuration Variables
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
2013-12-21 01:25:36 +01:00
|
|
|
|
At one time, this section provided a list of all NuttX configuration
|
|
|
|
|
|
variables. However, NuttX has since converted to use the kconfig-frontends
|
|
|
|
|
|
tools (See http://ymorin.is-a-geek.org/projects/kconfig-frontends). Now,
|
|
|
|
|
|
the NuttX configuration is determined by a self-documenting set of Kconfig
|
|
|
|
|
|
files.
|
|
|
|
|
|
|
|
|
|
|
|
The current NuttX configuration variables are also documented in separate,
|
|
|
|
|
|
auto-generated configuration variable document. That configuration variable
|
|
|
|
|
|
document is generated using the kconfig2html tool that can be found in the
|
|
|
|
|
|
nuttx/tools directory. That tool analyzes the NuttX Kconfig files and
|
|
|
|
|
|
generates an excruciatingly boring HTML document.
|
|
|
|
|
|
|
|
|
|
|
|
The latest boring configuration variable documentation can be regenerated at
|
|
|
|
|
|
any time using that tool or, more appropriately, the wrapper script at
|
|
|
|
|
|
nuttx/tools/mkconfigvars.sh. That script will generate the file
|
|
|
|
|
|
nuttx/Documentation/NuttXConfigVariables.html.
|
|
|
|
|
|
|
|
|
|
|
|
The version of NuttXConfigVariables.html for the last released version of
|
|
|
|
|
|
NuttX can also be found online at:
|
|
|
|
|
|
http://nuttx.org/Documentation/NuttXConfigVariables.html.
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
|
|
|
|
|
Supported Boards
|
|
|
|
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
2011-06-09 02:02:24 +02:00
|
|
|
|
configs/amber
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This is placeholder for the SoC Robotics Amber Web Server that is based
|
|
|
|
|
|
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is
|
|
|
|
|
|
there is untested due to tool-related issues.
|
2011-06-09 02:02:24 +02:00
|
|
|
|
|
2013-06-27 22:24:27 +02:00
|
|
|
|
configs/arduino-due
|
|
|
|
|
|
This sub-directory holds board support for the Arduino DUE board featuring
|
|
|
|
|
|
the Atmel ATSAM3X8E MCU running at 84 MHz.
|
|
|
|
|
|
|
2010-10-04 17:24:20 +02:00
|
|
|
|
configs/avr32dev1
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is
|
|
|
|
|
|
based on the Atmel AT32UC3B0256 MCU and uses a specially patched
|
|
|
|
|
|
version of the GNU toolchain: The patches provide support for the
|
|
|
|
|
|
AVR32 family. That patched GNU toolchain is available only from the
|
|
|
|
|
|
Atmel website. STATUS: This port is functional but very basic. There
|
|
|
|
|
|
are configurations for NSH and the OS test.
|
2010-10-04 17:24:20 +02:00
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
configs/c5471evm
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This is a port to the Spectrum Digital C5471 evaluation board. The
|
|
|
|
|
|
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
|
2012-11-06 14:36:51 +01:00
|
|
|
|
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
|
2012-10-06 01:01:51 +02:00
|
|
|
|
NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This port is complete and verified.
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2012-11-21 19:19:49 +01:00
|
|
|
|
configs/cloudctrl
|
|
|
|
|
|
Darcy's CloudController board. This is a small network relay development
|
|
|
|
|
|
board. Based on the Shenzhou IV development board design. It is based on
|
|
|
|
|
|
the STM32F107VC MCU.
|
|
|
|
|
|
|
2013-09-28 00:12:44 +02:00
|
|
|
|
configs/compal_e86, compal_e88 and compal_e99
|
|
|
|
|
|
These directories contain the board support for compal e86, e88 and e99 phones.
|
2012-03-24 18:52:10 +01:00
|
|
|
|
These ports are based on patches contributed by Denis Carikli for both the
|
|
|
|
|
|
compal e99 and e88. The patches were made by Alan Carvalho de Assis and
|
2013-09-28 00:12:44 +02:00
|
|
|
|
Denis Carikli using the Stefan Richter's Osmocom-bb patches. The variant
|
|
|
|
|
|
for the e86 was submitted by Craig Comstock.
|
2012-03-24 18:52:10 +01:00
|
|
|
|
|
2009-12-03 00:53:41 +01:00
|
|
|
|
configs/demo9s12ne64
|
2012-04-16 17:45:33 +02:00
|
|
|
|
Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
|
2012-03-10 19:57:44 +01:00
|
|
|
|
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it
|
|
|
|
|
|
is code complete but has not yet been verified.
|
2011-05-26 01:43:40 +02:00
|
|
|
|
|
2014-12-16 22:29:14 +01:00
|
|
|
|
configs/dk-tm4c129x
|
|
|
|
|
|
This is the port of NuttX to the Tiva<76> DK-TM4C129x Connected Development Kit. The
|
|
|
|
|
|
Tiva<76> DK-TM4C129x features the TM4C129XNCZAD MCU.
|
|
|
|
|
|
|
2010-08-21 13:37:58 +02:00
|
|
|
|
configs/ea3131
|
2012-11-06 14:36:51 +01:00
|
|
|
|
Embedded Artists EA3131 Development board. This board is based on the
|
2012-10-06 01:01:51 +02:00
|
|
|
|
an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
|
2012-03-10 19:57:44 +01:00
|
|
|
|
STATUS: This port is complete and mature.
|
|
|
|
|
|
|
|
|
|
|
|
configs/ea3152
|
2012-11-06 14:36:51 +01:00
|
|
|
|
Embedded Artists EA3152 Development board. This board is based on the
|
2012-10-06 01:01:51 +02:00
|
|
|
|
an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
|
2012-03-10 19:57:44 +01:00
|
|
|
|
STATUS: This port is has not be exercised well, but since it is
|
|
|
|
|
|
a simple derivative of the ea3131, it should be fully functional.
|
2010-08-21 13:37:58 +02:00
|
|
|
|
|
2009-05-14 20:55:22 +02:00
|
|
|
|
configs/eagle100
|
2012-11-06 14:36:51 +01:00
|
|
|
|
Micromint Eagle-100 Development board. This board is based on the
|
2012-03-10 19:57:44 +01:00
|
|
|
|
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
|
2012-10-06 01:01:51 +02:00
|
|
|
|
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
|
2009-05-14 20:55:22 +02:00
|
|
|
|
|
2014-11-03 23:58:22 +01:00
|
|
|
|
configs/efm32-g8xx-stk
|
|
|
|
|
|
The port of NuttX to the the EFM32 Gecko Starter Kit (EFM32-G8XX-STK).
|
|
|
|
|
|
|
|
|
|
|
|
configs/efm32gg-stk3700
|
|
|
|
|
|
The port of NuttX to the the EFM32 Giant Gecko Starter Kit
|
|
|
|
|
|
(EFM32GG-STK3700).
|
|
|
|
|
|
|
2012-06-30 02:53:54 +02:00
|
|
|
|
configs/ekk-lm3s9b96
|
2012-11-06 14:36:51 +01:00
|
|
|
|
TI/Stellaris EKK-LM3S9B96 board. This board is based on the
|
2012-06-30 02:53:54 +02:00
|
|
|
|
an EKK-LM3S9B96 which is a Cortex-M3.
|
|
|
|
|
|
|
2008-11-05 23:16:22 +01:00
|
|
|
|
configs/ez80f0910200kitg
|
2012-03-10 19:57:44 +01:00
|
|
|
|
ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200kitg
|
|
|
|
|
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
|
|
|
|
|
tools. The development environment is Cygwin under WinXP.
|
2008-11-05 23:16:22 +01:00
|
|
|
|
|
2008-12-07 16:46:06 +01:00
|
|
|
|
configs/ez80f0910200zco
|
2012-03-10 19:57:44 +01:00
|
|
|
|
ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200zco
|
|
|
|
|
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
|
|
|
|
|
tools. The development environment is Cygwin under WinXP.
|
2008-12-07 16:46:06 +01:00
|
|
|
|
|
2012-09-09 21:13:30 +02:00
|
|
|
|
configs/fire-stm32v2
|
|
|
|
|
|
A configuration for the M3 Wildfire STM32 board. This board is based on the
|
2012-09-21 19:32:30 +02:00
|
|
|
|
STM32F103VET6 chip. See http://firestm32.taobao.com . Version 2 and 3 of
|
|
|
|
|
|
the boards are supported but only version 2 has been tested.
|
2012-09-09 21:13:30 +02:00
|
|
|
|
|
2015-02-11 14:18:06 +01:00
|
|
|
|
configs/freedom-kl25z
|
|
|
|
|
|
configs/freedom-kl26z
|
|
|
|
|
|
These configurations are for the Freescale Freedom KL25Z and very similar
|
|
|
|
|
|
KL26Z board. The Freedom-KL25Z features the K25Z120LE3AN chip; the
|
|
|
|
|
|
Freedom-KL26Z has the K26Z128VLH4 chip. These are separate configurations
|
|
|
|
|
|
because of minor differences in the on-board logic. Both include a
|
|
|
|
|
|
built-in SDA debugger.
|
|
|
|
|
|
|
2011-12-17 21:07:22 +01:00
|
|
|
|
configs/hymini-stm32v
|
2012-03-10 19:57:44 +01:00
|
|
|
|
A configuration for the HY-Mini STM32v board. This board is based on the
|
|
|
|
|
|
STM32F103VCT chip.
|
2011-12-17 21:07:22 +01:00
|
|
|
|
|
2011-08-15 16:55:36 +02:00
|
|
|
|
configs/kwikstik-k40.
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40
|
|
|
|
|
|
development board.
|
|
|
|
|
|
|
2015-12-16 00:19:35 +01:00
|
|
|
|
configs/launchxl-tms57004
|
2015-12-16 19:45:35 +01:00
|
|
|
|
TI Hercules TMS570LS04x/03x LaunchPad Evaluation Kit (LAUNCHXL-TMS57004)
|
|
|
|
|
|
featuring the Hercules TMS570LS0432PZ chip.
|
2015-12-16 00:19:35 +01:00
|
|
|
|
|
2012-06-29 21:35:28 +02:00
|
|
|
|
configs/lincoln60
|
|
|
|
|
|
NuttX port to the Micromint Lincoln 60 board.
|
2012-11-06 14:36:51 +01:00
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
configs/lm3s6432-s2e
|
|
|
|
|
|
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
|
|
|
|
|
|
Serial module.
|
2011-08-15 16:55:36 +02:00
|
|
|
|
|
2010-05-07 06:20:12 +02:00
|
|
|
|
configs/lm3s6965-ek
|
2012-11-06 14:36:51 +01:00
|
|
|
|
Stellaris LM3S6965 Evaluation Kit. This board is based on the
|
2012-03-10 19:57:44 +01:00
|
|
|
|
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
|
2012-10-06 01:01:51 +02:00
|
|
|
|
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
|
2010-05-07 06:20:12 +02:00
|
|
|
|
|
2011-05-26 01:43:40 +02:00
|
|
|
|
configs/lm3s8962-ek
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Stellaris LMS38962 Evaluation Kit.
|
2011-05-26 01:43:40 +02:00
|
|
|
|
|
2013-03-01 22:41:29 +01:00
|
|
|
|
configs/lm4f120-launchpad
|
|
|
|
|
|
This is the port of NuttX to the Stellaris LM4F120 LaunchPad. The
|
|
|
|
|
|
Stellaris<69> LM4F120 LaunchPad Evaluation Board is a low-cost evaluation
|
2014-03-10 18:25:06 +01:00
|
|
|
|
platform for ARM<52> Cortex<65>-M4F-based microcontrollers from Texas
|
2013-03-01 22:41:29 +01:00
|
|
|
|
Instruments.
|
|
|
|
|
|
|
2015-05-23 03:56:45 +02:00
|
|
|
|
configs/lpcxpresso-lpc1115
|
2015-05-26 02:29:43 +02:00
|
|
|
|
NuttX board support for the Embedded Artists LPCXpresso LPC1115 board
|
|
|
|
|
|
featuring the NXP LPC1115 MCU.
|
2015-05-23 03:56:45 +02:00
|
|
|
|
|
2011-04-10 20:44:31 +02:00
|
|
|
|
configs/lpcxpresso-lpc1768
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
|
|
|
|
|
|
is based on the NXP LPC1768. The Code Red toolchain is used by default.
|
|
|
|
|
|
STATUS: Under development.
|
2011-04-10 20:44:31 +02:00
|
|
|
|
|
2012-07-04 16:19:49 +02:00
|
|
|
|
configs/lpc4330-xplorer
|
|
|
|
|
|
NuttX port to the LPC4330-Xplorer board from NGX Technologies featuring
|
|
|
|
|
|
the NXP LPC4330FET100 MCU
|
|
|
|
|
|
|
2016-01-15 20:12:42 +01:00
|
|
|
|
configs/lpc4337-ws
|
|
|
|
|
|
NuttX port to the WaveShare LPC4337-ws board featuring the NXP LPC4337JBD144
|
|
|
|
|
|
MCU.
|
|
|
|
|
|
|
2014-11-26 22:37:54 +01:00
|
|
|
|
configs/lpc4357-evb
|
2014-11-26 23:44:25 +01:00
|
|
|
|
NuttX port to the LPC4357-EVB board from Embest featuring the NXP
|
|
|
|
|
|
LPC4357FET256 MCU. Based on the LPC4300 Xplorer port and provided by
|
|
|
|
|
|
Toby Duckworth.
|
2014-11-26 22:37:54 +01:00
|
|
|
|
|
2015-09-29 17:21:41 +02:00
|
|
|
|
configs/lpc4370-link2
|
|
|
|
|
|
NuttX port to the NXP LPC4370-Link2 development board featuring the NXP
|
|
|
|
|
|
LPC4370FET100 MCU. Based on the LPC4300 Xplorer port and provided by
|
|
|
|
|
|
Lok Tep.
|
|
|
|
|
|
|
2013-09-13 20:45:33 +02:00
|
|
|
|
configs/maple
|
|
|
|
|
|
NuttX support for the LeafLab's Maple and Maple Mini boards. These boards
|
|
|
|
|
|
are based on the STM32F103RBT6 chip for the standard version and on the
|
|
|
|
|
|
STM32F103CBT6 for the mini version (See http://leaflabs.com/docs/hardware/maple.html)
|
|
|
|
|
|
|
2010-09-10 03:19:15 +02:00
|
|
|
|
configs/mbed
|
2012-03-10 19:57:44 +01:00
|
|
|
|
The configurations in this directory support the mbed board (http://mbed.org)
|
|
|
|
|
|
that features the NXP LPC1768 microcontroller. This OS is also built
|
2012-10-06 01:01:51 +02:00
|
|
|
|
with the arm-nuttx-elf toolchain*. STATUS: Contributed.
|
2010-09-10 03:19:15 +02:00
|
|
|
|
|
2013-05-01 02:31:47 +02:00
|
|
|
|
configs/mikroe-stm32f4
|
|
|
|
|
|
This is the port of NuttX to the MikroElektronika Mikromedia for STM32F4
|
|
|
|
|
|
development board. Contributed by Ken Petit.
|
|
|
|
|
|
|
2007-04-25 02:09:44 +02:00
|
|
|
|
configs/mcu123-lpc214x
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This port is for the NXP LPC2148 as provided on the mcu123.com
|
2012-10-06 01:01:51 +02:00
|
|
|
|
lpc214x development board. This OS is also built with the arm-nuttx-elf
|
2012-03-10 19:57:44 +01:00
|
|
|
|
toolchain*. The port supports serial, timer0, spi, and usb.
|
2007-04-25 02:09:44 +02:00
|
|
|
|
|
2011-06-09 02:02:24 +02:00
|
|
|
|
configs/micropendous3
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This is a port to the Opendous Micropendous 3 board. This board may
|
|
|
|
|
|
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
|
|
|
|
|
|
Support is configured for the AT90USB647.
|
2011-06-09 02:02:24 +02:00
|
|
|
|
|
2012-06-20 02:04:56 +02:00
|
|
|
|
configs/mirtoo
|
|
|
|
|
|
This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip
|
|
|
|
|
|
PIC32MX250F128D. See http://www.dimitech.com/ for further information.
|
|
|
|
|
|
|
2015-01-31 21:10:53 +01:00
|
|
|
|
configs/moteino-mega
|
|
|
|
|
|
This is placeholder for the LowPowerLab MoteinoMEGA that is based
|
|
|
|
|
|
on the Atmel AVR ATMega1284P MCU. There is not much there yet and what is
|
|
|
|
|
|
there is untested due to tool-related issues.
|
|
|
|
|
|
|
2015-07-29 22:12:15 +02:00
|
|
|
|
configs/moxa
|
|
|
|
|
|
Moxa NP51x0 series of 2-port advanced RS-232/422/485 serial device servers.
|
|
|
|
|
|
|
2009-05-14 20:55:22 +02:00
|
|
|
|
configs/mx1ads
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This is a port to the Motorola MX1ADS development board. That board
|
|
|
|
|
|
is based on the Freescale i.MX1 processor. The i.MX1 is an ARM920T.
|
|
|
|
|
|
STATUS: This port is nearly code complete but was never fully
|
|
|
|
|
|
integrated due to tool-related issues.
|
2009-05-14 20:55:22 +02:00
|
|
|
|
|
2011-02-25 19:46:06 +01:00
|
|
|
|
configs/ne64badge
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Future Electronics Group NE64 /PoE Badge board based on the
|
|
|
|
|
|
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
|
|
|
|
|
|
STATUS: Under development. The port is code-complete but has
|
|
|
|
|
|
not yet been fully tested.
|
2011-02-25 19:46:06 +01:00
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
configs/ntosd-dm320
|
2012-10-06 01:01:51 +02:00
|
|
|
|
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
|
2012-03-10 19:57:44 +01:00
|
|
|
|
toolchain*: see
|
|
|
|
|
|
|
|
|
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
|
2012-11-06 14:36:51 +01:00
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
There are some differences between the Dev Board and the currently
|
|
|
|
|
|
available commercial v1.0 Boards. See
|
|
|
|
|
|
|
|
|
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1
|
2010-08-21 13:37:58 +02:00
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
NuttX operates on the ARM9EJS of this dual core processor.
|
|
|
|
|
|
STATUS: This port is code complete, verified, and included in the
|
|
|
|
|
|
NuttX 0.2.1 release.
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2014-10-15 15:05:08 +02:00
|
|
|
|
configs/nucleo-f4x1re
|
2014-10-15 01:32:13 +02:00
|
|
|
|
STMicro ST Nucleo F401RE and F411RE boards. See
|
|
|
|
|
|
http://mbed.org/platforms/ST-Nucleo-F401RE and
|
|
|
|
|
|
http://developer.mbed.org/platforms/ST-Nucleo-F411RE for more
|
|
|
|
|
|
information about these boards.
|
2014-04-20 21:42:23 +02:00
|
|
|
|
|
2015-09-10 15:05:42 +02:00
|
|
|
|
configs/nucleo-f303re
|
2015-10-01 21:09:05 +02:00
|
|
|
|
STMicro ST Nucleo F303RE board. Contributed by Paul Alexander Patience.
|
2015-09-10 15:05:42 +02:00
|
|
|
|
|
2013-03-01 22:41:29 +01:00
|
|
|
|
configs/nutiny-nuc120
|
|
|
|
|
|
This is the port of NuttX to the NuvoTon NuTiny-SDK-NUC120 board. This
|
|
|
|
|
|
board has the NUC120LE3AN chip with a built-in NuLink debugger.
|
|
|
|
|
|
|
2014-10-20 20:00:37 +02:00
|
|
|
|
configs/olimex-efm32g880f128-stk
|
|
|
|
|
|
This is the port of NuttX to the Olimex EFM32G880F128-STK development
|
|
|
|
|
|
board.
|
|
|
|
|
|
|
2010-11-06 18:01:13 +01:00
|
|
|
|
configs/olimex-lpc1766stk
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under
|
|
|
|
|
|
Linux or Cygwin. STATUS: Complete and mature.
|
2010-11-06 18:01:13 +01:00
|
|
|
|
|
2010-05-07 06:20:12 +02:00
|
|
|
|
configs/olimex-lpc2378
|
2012-10-06 01:01:51 +02:00
|
|
|
|
This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Linux or Cygwin. STATUS: ostest and NSH configurations available.
|
|
|
|
|
|
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
|
2010-08-21 13:37:58 +02:00
|
|
|
|
|
2014-06-03 18:34:36 +02:00
|
|
|
|
configs/olimex-stm32-h405
|
|
|
|
|
|
This port uses the Olimex STM32 H405 board and a GNU arm-nuttx-elf
|
|
|
|
|
|
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
|
|
|
|
|
|
further information. This board features the STMicro STM32F405RGT6 MCU.
|
|
|
|
|
|
Contributed by Martin Lederhilger.
|
|
|
|
|
|
|
2016-01-18 15:03:03 +01:00
|
|
|
|
configs/olimex-stm32-h407
|
|
|
|
|
|
This port uses the Olimex STM32 H407 board and a GNU arm-nuttx-elf
|
|
|
|
|
|
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
|
|
|
|
|
|
further information. This board features the STMicro STM32F407ZGT6 (144
|
|
|
|
|
|
pins). Contributed by Neil Hancock.
|
|
|
|
|
|
|
2012-08-10 19:07:02 +02:00
|
|
|
|
configs/olimex-stm32-p107
|
2012-10-06 01:01:51 +02:00
|
|
|
|
This port uses the Olimex STM32-P107 board (STM32F107VC) and a GNU arm-nuttx-elf
|
2012-08-10 19:07:02 +02:00
|
|
|
|
toolchain* under Linux or Cygwin. See the https://www.olimex.com/dev/stm32-p107.html
|
2013-10-24 16:48:04 +02:00
|
|
|
|
for further information. Contributed by Max Holtzberg.
|
|
|
|
|
|
|
|
|
|
|
|
configs/olimex-stm32-p207
|
|
|
|
|
|
This port uses the Olimex STM32-P207 board (STM32F207ZE) and a GNU arm-nuttx-elf
|
2015-03-21 01:00:10 +01:00
|
|
|
|
toolchain under Linux or Cygwin. See the https://www.olimex.com/dev/stm32-p207.html
|
2013-10-24 16:48:04 +02:00
|
|
|
|
for further information. Contributed by Martin Lederhilger.
|
2012-08-10 19:07:02 +02:00
|
|
|
|
|
2015-03-21 01:00:10 +01:00
|
|
|
|
configs/olimexino-stm32
|
|
|
|
|
|
This port uses the Olimexino STM32 board (STM32F103RBT6) and a GNU arm-nuttx-elf
|
|
|
|
|
|
toolchain* under Linux or Cygwin. See the http://www.olimex.com for further\
|
|
|
|
|
|
information. Contribued by David Sidrane.
|
|
|
|
|
|
|
2008-11-05 23:16:22 +01:00
|
|
|
|
configs/olimex-strp711
|
2012-10-06 01:01:51 +02:00
|
|
|
|
This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
|
|
|
|
|
|
further information. STATUS: Configurations for the basic OS test and NSH
|
|
|
|
|
|
are complete and verified.
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2011-05-26 01:43:40 +02:00
|
|
|
|
configs/pcblogic-pic32mx
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This is the port of NuttX to the PIC32MX board from PCB Logic Design Co.
|
|
|
|
|
|
This board features the MicroChip PIC32MX460F512L.
|
|
|
|
|
|
The board is a very simple -- little more than a carrier for the PIC32
|
|
|
|
|
|
MCU plus voltage regulation, debug interface, and an OTG connector.
|
|
|
|
|
|
STATUS: Code complete but testing has been stalled due to tool related problems
|
|
|
|
|
|
(PICkit 2 does not work with the PIC32).
|
2011-05-12 19:42:01 +02:00
|
|
|
|
|
2013-12-07 21:25:35 +01:00
|
|
|
|
configs/pcduino-a10
|
|
|
|
|
|
This directory contains the port of NuttX to the pcDuino v1 board
|
|
|
|
|
|
See http://www.pcduino.com/ for information about pcDuino Lite, v1,
|
|
|
|
|
|
and v2. These boards are based around the Allwinner A10 Cortex-A8 CPU.
|
|
|
|
|
|
I have not compared these boards in detail, but I believe that the
|
|
|
|
|
|
differences are cosmetic. This port was developed on the v1 board, but
|
|
|
|
|
|
the others may be compatible.
|
|
|
|
|
|
|
2012-12-11 22:42:15 +01:00
|
|
|
|
configs/p112
|
|
|
|
|
|
The P112 is notable because it was the first of the hobbyist single board
|
|
|
|
|
|
computers to reach the production stage. The P112 hobbyist computers
|
|
|
|
|
|
were relatively widespread and inspired other hobbyist centered home brew
|
|
|
|
|
|
computing projects such as N8VEM home brew computing project. The P112
|
|
|
|
|
|
project still maintains many devoted enthusiasts and has an online
|
|
|
|
|
|
repository of software and other information.
|
|
|
|
|
|
|
|
|
|
|
|
The P112 computer originated as a commercial product of "D-X Designs Pty
|
|
|
|
|
|
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
|
|
|
|
|
|
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
|
|
|
|
|
|
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
|
|
|
|
|
|
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
|
|
|
|
|
|
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
|
|
|
|
|
|
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
|
|
|
|
|
|
|
|
|
|
|
|
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
|
|
|
|
|
|
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
|
|
|
|
|
|
boards was discussed. David Griffith decided to produce additional P112 kits
|
|
|
|
|
|
with Dave Brooks blessing and the assistance of others. In addition Terry
|
|
|
|
|
|
Gulczynski makes additional P112 derivative hobbyist home brew computers.
|
|
|
|
|
|
Hal Bower was very active in the mid 1990's on the P112 project and ported
|
|
|
|
|
|
the "Banked/Portable BIOS".
|
2011-10-10 21:40:56 +02:00
|
|
|
|
|
2012-12-15 17:03:45 +01:00
|
|
|
|
Dave Brooks was successfully funded through Kickstarter for and another
|
|
|
|
|
|
run of P112 boards in November of 2012.
|
|
|
|
|
|
|
2015-02-22 01:41:17 +01:00
|
|
|
|
configs/pic32mx-starterkit
|
2012-04-22 21:50:33 +02:00
|
|
|
|
This directory contains the port of NuttX to the Microchip PIC32 Ethernet
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
2012-04-22 21:50:33 +02:00
|
|
|
|
See www.microchip.com for further information.
|
|
|
|
|
|
|
|
|
|
|
|
configs/pic32mx7mmb
|
|
|
|
|
|
This directory will (eventually) contain the port of NuttX to the
|
|
|
|
|
|
Mikroelektronika PIC32MX7 Multimedia Board (MMB). See
|
|
|
|
|
|
http://www.mikroe.com/ for further information.
|
2012-03-10 19:57:44 +01:00
|
|
|
|
|
2013-05-05 01:57:02 +02:00
|
|
|
|
configs/pirelli_dpl10
|
2015-02-22 17:53:24 +01:00
|
|
|
|
configs/pic32mz-starterkit
|
|
|
|
|
|
This directory contains the port of NuttX to the Microchip PIC32MZ
|
|
|
|
|
|
Embedded Connectivity (EC) Starter Kit. There are two configurations of
|
|
|
|
|
|
the starter kit:
|
|
|
|
|
|
|
|
|
|
|
|
1) The PIC32MZ Embedded Connectivity Starter Kit based on the
|
|
|
|
|
|
PIC32MZ2048ECH144-I/PH chip (DM320006), and
|
|
|
|
|
|
2) The PIC32MZ Embedded Connectivity Starter Kit based on the
|
|
|
|
|
|
PIC32MZ2048ECM144-I/PH w/Crypto Engine (DM320006-C)
|
|
|
|
|
|
|
|
|
|
|
|
See www.microchip.com for further information.
|
|
|
|
|
|
|
2013-05-07 16:55:28 +02:00
|
|
|
|
This directory contains the board support for Pirelli "Discus" DP-L10 phones.
|
2013-05-05 17:10:47 +02:00
|
|
|
|
It is a variant of the compal_e88 config with the small changes for the
|
|
|
|
|
|
differences in the board.
|
2013-05-05 01:57:02 +02:00
|
|
|
|
|
2011-10-10 21:40:56 +02:00
|
|
|
|
configs/qemu-i486
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
|
|
|
|
|
|
hardwared (Google the Bifferboard).
|
2011-05-12 19:42:01 +02:00
|
|
|
|
|
2011-05-26 01:43:40 +02:00
|
|
|
|
configs/rgmp
|
2012-11-06 14:36:51 +01:00
|
|
|
|
RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for
|
2012-03-10 19:57:44 +01:00
|
|
|
|
running GPOS and RTOS simultaneously on multi-processor platforms. You can
|
|
|
|
|
|
port your favorite RTOS to RGMP together with an unmodified Linux to form a
|
|
|
|
|
|
hybrid operating system. This makes your application able to use both RTOS
|
|
|
|
|
|
and GPOS features.
|
2011-05-26 01:43:40 +02:00
|
|
|
|
|
2013-07-18 23:20:47 +02:00
|
|
|
|
See http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further
|
|
|
|
|
|
information about RGMP.
|
2011-05-12 19:42:01 +02:00
|
|
|
|
|
2016-02-29 20:16:39 +01:00
|
|
|
|
configs/sabre-6quad
|
|
|
|
|
|
This directory holds a port of NuttX to the NXP/Freescale Sabre board
|
|
|
|
|
|
featuring the iMX 6Quad CPU.
|
|
|
|
|
|
|
2015-09-05 20:13:12 +02:00
|
|
|
|
configs/sama5d2-xult
|
|
|
|
|
|
This is the port of NuttX to the Atmel SAMA5D2-Xplained Ultra development
|
|
|
|
|
|
board. This board features the Atmel SAMA5D27. See http://www.atmel.com.
|
|
|
|
|
|
|
2013-07-19 23:23:03 +02:00
|
|
|
|
configs/sama5d3x-ek
|
2013-07-31 18:46:13 +02:00
|
|
|
|
This is the port of NuttX to the Atmel SAMA5D3x-EK development boards
|
|
|
|
|
|
(where x=1,3,4, or 5). These boards feature the Atmel SAMA5D3
|
|
|
|
|
|
microprocessors. Four different SAMA5D3x-EK kits are available
|
|
|
|
|
|
|
|
|
|
|
|
- SAMA5D31-EK with the ATSAMA5D1 (http://www.atmel.com/devices/sama5d31.aspx)
|
|
|
|
|
|
- SAMA5D33-EK with the ATSAMA5D3 (http://www.atmel.com/devices/sama5d33.aspx)
|
|
|
|
|
|
- SAMA5D34-EK with the ATSAMA5D4 (http://www.atmel.com/devices/sama5d34.aspx)
|
|
|
|
|
|
- SAMA5D35-EK with the ATSAMA5D5 (http://www.atmel.com/devices/sama5d35.aspx)
|
|
|
|
|
|
|
|
|
|
|
|
The each consist of an identical base board with different plug-in modules
|
|
|
|
|
|
for each CPU. An option 7 inch LCD is also available. All four boards
|
|
|
|
|
|
are supported by NuttX with a simple reconfiguration of the processor
|
|
|
|
|
|
type.
|
|
|
|
|
|
|
2014-03-28 22:20:26 +01:00
|
|
|
|
configs/sama5d3-xplained
|
|
|
|
|
|
This is the port of NuttX to the Atmel SAMA5D3x-Xplained development board.
|
|
|
|
|
|
This board features the Atmel SAMA5D36. See
|
|
|
|
|
|
http://www.atmel.com/devices/sama5d36.aspx.
|
2013-07-19 23:23:03 +02:00
|
|
|
|
|
2014-06-06 20:37:36 +02:00
|
|
|
|
configs/sama5d4-ek
|
|
|
|
|
|
This is the port of NuttX to the Atmel SAMA5D4-EK development board.
|
|
|
|
|
|
This board features the Atmel SAMA5D44. See http://www.atmel.com.
|
|
|
|
|
|
|
2014-02-13 00:50:58 +01:00
|
|
|
|
configs/samd20-xplained
|
2014-02-18 23:19:14 +01:00
|
|
|
|
The port of NuttX to the Atmel SAMD20-Xplained Pro development board. This
|
|
|
|
|
|
board features the ATSAMD20J18A MCU (Cortex-M0+ with 256KB of FLASH and
|
|
|
|
|
|
32KB of SRAM).
|
2014-02-13 00:50:58 +01:00
|
|
|
|
|
2015-06-21 15:48:46 +02:00
|
|
|
|
configs/samd21-xplained
|
|
|
|
|
|
The port of NuttX to the Atmel SAMD21-Xplained Pro development board. This
|
|
|
|
|
|
board features the ATSAMD21J18A MCU (Cortex-M0+ with 256KB of FLASH and
|
|
|
|
|
|
32KB of SRAM).
|
|
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
configs/sam3u-ek
|
|
|
|
|
|
The port of NuttX to the Atmel SAM3U-EK development board.
|
2008-11-05 23:16:22 +01:00
|
|
|
|
|
2014-03-10 22:18:46 +01:00
|
|
|
|
configs/sam4e-ek
|
|
|
|
|
|
The port of NuttX to the Atmel SAM4E-EK development board. This board
|
|
|
|
|
|
features the SAM4E16 MCU running at up to 120MHz.
|
|
|
|
|
|
|
2013-06-03 23:11:56 +02:00
|
|
|
|
configs/sam4l-xplained
|
|
|
|
|
|
The port of NuttX to the Atmel SAM4L-Xplained development board.
|
|
|
|
|
|
|
2014-04-22 01:34:05 +02:00
|
|
|
|
configs/sam4s-xplained
|
|
|
|
|
|
The port of NuttX to the Atmel SAM4S-Xplained development board.
|
|
|
|
|
|
|
|
|
|
|
|
configs/sam4s-xplained-pro
|
|
|
|
|
|
The port of NuttX to the Atmel SAM4S-Xplained Pro development board.
|
|
|
|
|
|
|
2015-11-18 20:54:57 +01:00
|
|
|
|
configs/same70-xplained
|
|
|
|
|
|
The port of NuttX to the Atmel SAME70 Xplained evaluation board.
|
|
|
|
|
|
|
2015-03-06 15:56:44 +01:00
|
|
|
|
configs/samv71-xult
|
|
|
|
|
|
The port of NuttX to the Atmel SAMV71 Xplained Ultra evaluation board.
|
|
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
configs/sim
|
|
|
|
|
|
A user-mode port of NuttX to the x86 Linux platform is available.
|
|
|
|
|
|
The purpose of this port is primarily to support OS feature development.
|
|
|
|
|
|
This port does not support interrupts or a real timer (and hence no
|
|
|
|
|
|
round robin scheduler) Otherwise, it is complete.
|
2008-11-05 23:16:22 +01:00
|
|
|
|
|
2012-09-07 21:29:21 +02:00
|
|
|
|
configs/shenzhou
|
|
|
|
|
|
This is the port of NuttX to the Shenzhou development board from
|
|
|
|
|
|
www.armjishu.com. This board features the STMicro STM32F107VCT MCU.
|
|
|
|
|
|
|
2013-10-02 16:24:46 +02:00
|
|
|
|
configs/spark
|
|
|
|
|
|
Board support for the Spark Core from Spark Devices http://www.sparkdevices.com).
|
|
|
|
|
|
This board features the STM32103CBT6 MCU from STMicro.
|
|
|
|
|
|
|
2009-02-07 16:24:32 +01:00
|
|
|
|
configs/skp16c26
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port
|
|
|
|
|
|
uses the GNU m32c toolchain. STATUS: The port is complete but untested
|
|
|
|
|
|
due to issues with compiler internal errors.
|
2009-02-07 16:24:32 +01:00
|
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
|
configs/stm3210e-eval
|
2012-03-10 19:57:44 +01:00
|
|
|
|
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6
|
|
|
|
|
|
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3
|
|
|
|
|
|
toolchain.
|
|
|
|
|
|
|
|
|
|
|
|
configs/stm3220g-eval
|
2012-04-16 17:45:33 +02:00
|
|
|
|
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG
|
|
|
|
|
|
microcontroller (ARM Cortex-M3).
|
2009-09-23 21:21:00 +02:00
|
|
|
|
|
2012-03-10 19:57:44 +01:00
|
|
|
|
configs/stm3240g-eval
|
2012-04-16 17:45:33 +02:00
|
|
|
|
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6
|
2012-03-10 19:57:44 +01:00
|
|
|
|
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4
|
|
|
|
|
|
toolchain (such as CodeSourcery).
|
2011-12-20 19:28:50 +01:00
|
|
|
|
|
2012-01-11 15:56:56 +01:00
|
|
|
|
configs/stm32f4discovery
|
2012-11-06 14:36:51 +01:00
|
|
|
|
STMicro STM32F4-Discovery board based on the STMIcro STM32F407VGT6 MCU.
|
2012-01-11 15:56:56 +01:00
|
|
|
|
|
2013-11-07 23:55:45 +01:00
|
|
|
|
configs/stm32f429i-disco
|
|
|
|
|
|
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
|
|
|
|
|
|
|
2015-07-16 19:41:40 +02:00
|
|
|
|
configs/stm32f746g-disco
|
|
|
|
|
|
STMicro STM32F746G-DISCO development board featuring the STM32F746NGH6
|
|
|
|
|
|
MCU. The STM32F746NGH6 is a 216MHz Cortex-M7 operation with 1024Kb Flash
|
|
|
|
|
|
memory and 300Kb SRAM.
|
|
|
|
|
|
|
2016-03-25 22:01:16 +01:00
|
|
|
|
configs/stm32l476vg-disco
|
|
|
|
|
|
STMicro STM32L476VG_DISCO development board featuring the STM32L476VG
|
|
|
|
|
|
MCU. The STM32L476VG is a Cortex-M4 optimised for low-power operation
|
|
|
|
|
|
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
|
|
|
|
|
|
|
2014-01-13 00:59:38 +01:00
|
|
|
|
configs/stm32ldiscovery
|
|
|
|
|
|
STMicro STM32L-Discovery board based on the STMicro STM32L152RB MCU.
|
|
|
|
|
|
|
|
|
|
|
|
configs/stm32vldiscovery
|
|
|
|
|
|
STMicro STM32VL-Discovery board based on the STMicro STM32F100RB MCU.
|
|
|
|
|
|
|
2011-07-03 18:31:10 +02:00
|
|
|
|
configs/sure-pic32mx
|
2012-03-10 19:57:44 +01:00
|
|
|
|
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure
|
|
|
|
|
|
Electronics (http://www.sureelectronics.net/). This board features
|
|
|
|
|
|
the MicroChip PIC32MX440F512H. See also
|
|
|
|
|
|
http://www.sureelectronics.net/goods.php?id=1168 for further
|
|
|
|
|
|
information about the Sure DB-DP11215 board.
|
2011-07-03 18:31:10 +02:00
|
|
|
|
|
2015-05-26 02:29:43 +02:00
|
|
|
|
configs/teensy-2.0
|
2012-04-16 17:45:33 +02:00
|
|
|
|
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
|
2012-03-10 19:57:44 +01:00
|
|
|
|
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
|
|
|
|
|
|
on an Atmel AT90USB1286 MCU.
|
2011-06-17 01:00:20 +02:00
|
|
|
|
|
2015-06-09 23:54:04 +02:00
|
|
|
|
configs/teensy-3.x
|
|
|
|
|
|
This is the port of NuttX to the Teensy-3.1 from PJRC
|
|
|
|
|
|
(https://www.pjrc.com/). The Teensy-3.1 features the Freescale
|
|
|
|
|
|
MK30DX256VLH7 chip (now NXP). The MK30DX256VLH7 is a 64-pin Cortex-M4
|
|
|
|
|
|
running at 72MHz. It has 256KiB of program FLASH memory and 64KiB of
|
|
|
|
|
|
SRAM. For more information about the Teensy 3.1, see
|
|
|
|
|
|
|
|
|
|
|
|
https://www.pjrc.com/teensy/teensy31.html
|
|
|
|
|
|
https://www.pjrc.com/store/teensy31.html
|
|
|
|
|
|
|
|
|
|
|
|
This board configuration can also be used with the older Teensy-3.0. The
|
|
|
|
|
|
Teensy-3.0 has the same schematic (although some pins are not used on the
|
|
|
|
|
|
Teensy-3.0). the primary difference is that the Teensy 3.0 has a
|
|
|
|
|
|
MK30DX128VLH5 with slightly less capability.
|
|
|
|
|
|
|
2015-05-07 15:06:50 +02:00
|
|
|
|
configs/teensy-lc
|
|
|
|
|
|
This is the port of nuttx for the Teensy LC board. The Teensy LC
|
|
|
|
|
|
is a DIP style breakout board for the MKL25Z64 and comes with a USB
|
|
|
|
|
|
based bootloader.
|
|
|
|
|
|
|
2014-03-10 18:25:06 +01:00
|
|
|
|
configs/tm4c123g-launchpad
|
2014-12-16 22:29:14 +01:00
|
|
|
|
This is the port of NuttX to the Tiva<76> TM4C123G LaunchPad. The
|
2014-03-10 18:25:06 +01:00
|
|
|
|
Tiva<76> TM4C123G LaunchPad Evaluation Board is a low-cost evaluation
|
|
|
|
|
|
platform for ARM<52> Cortex<65>-M4F-based microcontrollers from Texas
|
|
|
|
|
|
Instruments.
|
|
|
|
|
|
|
2015-02-12 01:27:38 +01:00
|
|
|
|
configs/tm4c1294-launchpad
|
|
|
|
|
|
This is the port of NuttX to the Tiva<76> TM4C1294 LaunchPad. The
|
|
|
|
|
|
Tiva<76> TM4C123G LaunchPad Evaluation Board is a low-cost evaluation
|
|
|
|
|
|
platform for ARM<52> Cortex<65>-M4F-based microcontrollers from Texas
|
|
|
|
|
|
Instruments.
|
|
|
|
|
|
|
2011-08-15 16:55:36 +02:00
|
|
|
|
configs/twr-k60n512
|
2012-03-10 19:57:44 +01:00
|
|
|
|
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512
|
|
|
|
|
|
development board.
|
2011-08-15 16:55:36 +02:00
|
|
|
|
|
2012-04-26 22:11:46 +02:00
|
|
|
|
configs/ubw32
|
|
|
|
|
|
|
|
|
|
|
|
This is the port to the Sparkfun UBW32 board. This port uses the original v2.4
|
|
|
|
|
|
board which is based on the MicroChip PIC32MX460F512L. See
|
|
|
|
|
|
http://www.sparkfun.com/products/8971. This older version has been replaced
|
|
|
|
|
|
with this board http://www.sparkfun.com/products/9713. See also
|
|
|
|
|
|
http://www.schmalzhaus.com/UBW32/.
|
|
|
|
|
|
|
2008-11-05 23:16:22 +01:00
|
|
|
|
configs/us7032evb1
|
2012-03-10 19:57:44 +01:00
|
|
|
|
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
|
|
|
|
|
|
STATUS: Work has just began on this port.
|
2008-11-05 23:16:22 +01:00
|
|
|
|
|
2013-11-30 19:14:15 +01:00
|
|
|
|
configs/viewtool-stm32f107
|
|
|
|
|
|
NuttX configurations for the ViewTool STM32F103/F107 V1.2 board. This
|
|
|
|
|
|
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
|
|
|
|
|
|
See http://www.viewtool.com/ for further information.
|
|
|
|
|
|
|
2008-02-15 23:14:00 +01:00
|
|
|
|
configs/xtrs
|
2012-03-10 19:57:44 +01:00
|
|
|
|
TRS80 Model 3. This port uses a vintage computer based on the Z80.
|
2012-11-06 14:36:51 +01:00
|
|
|
|
An emulator for this computer is available to run TRS80 programs on a
|
2012-03-10 19:57:44 +01:00
|
|
|
|
linux platform (http://www.tim-mann.org/xtrs.html).
|
2008-02-15 23:14:00 +01:00
|
|
|
|
|
2008-01-08 00:13:12 +01:00
|
|
|
|
configs/z16f2800100zcog
|
2012-03-10 19:57:44 +01:00
|
|
|
|
z16f Microcontroller. This port use the Zilog z16f2800100zcog
|
|
|
|
|
|
development kit and the Zilog ZDS-II Windows command line tools. The
|
|
|
|
|
|
development environment is Cygwin under WinXP.
|
2008-01-08 00:13:12 +01:00
|
|
|
|
|
2008-11-05 23:16:22 +01:00
|
|
|
|
configs/z80sim
|
2015-06-28 16:08:57 +02:00
|
|
|
|
z80 Microcontroller. This port uses a Z80 instruction set simulator
|
|
|
|
|
|
called z80sim. This port also uses the SDCC toolchain
|
|
|
|
|
|
(http://sdcc.sourceforge.net/") (verified with version 2.6.0).
|
2008-11-05 23:16:22 +01:00
|
|
|
|
|
2008-02-11 18:11:20 +01:00
|
|
|
|
configs/z8encore000zco
|
2012-03-10 19:57:44 +01:00
|
|
|
|
z8Encore! Microcontroller. This port use the Zilog z8encore000zco
|
|
|
|
|
|
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
|
|
|
|
|
|
tools. The development environment is Cygwin under WinXP.
|
2008-02-11 18:11:20 +01:00
|
|
|
|
|
2008-03-11 00:37:56 +01:00
|
|
|
|
configs/z8f64200100kit
|
2012-03-10 19:57:44 +01:00
|
|
|
|
z8Encore! Microcontroller. This port use the Zilog z8f64200100kit
|
|
|
|
|
|
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
|
|
|
|
|
|
tools. The development environment is Cygwin under WinXP.
|
2008-03-11 00:37:56 +01:00
|
|
|
|
|
2012-12-29 00:40:54 +01:00
|
|
|
|
configs/zp214xpa
|
|
|
|
|
|
This port is for the NXP LPC2148 as provided on the The0.net
|
|
|
|
|
|
ZPA213X/4XPA development board. Includes support for the
|
|
|
|
|
|
UG-2864AMBAG01 OLED also from The0.net
|
|
|
|
|
|
|
2013-02-26 15:09:43 +01:00
|
|
|
|
configs/zkit-arm-1769
|
|
|
|
|
|
Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based
|
|
|
|
|
|
on the NXP LPC1769. The Nuttx Buildroot toolchain is used by default.
|
|
|
|
|
|
|
2007-03-23 03:24:38 +01:00
|
|
|
|
Configuring NuttX
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
Configuring NuttX requires only copying
|
|
|
|
|
|
|
2008-02-07 15:41:11 +01:00
|
|
|
|
configs/<board-name>/<config-dir>/Make.def to ${TOPDIR}/Make.defs
|
|
|
|
|
|
configs/<board-name>/<config-dir>/setenv.sh to ${TOPDIR}/setenv.sh
|
|
|
|
|
|
configs/<board-name>/<config-dir>/defconfig to ${TOPDIR}/.config
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2008-02-07 15:41:11 +01:00
|
|
|
|
tools/configure.sh
|
|
|
|
|
|
There is a script that automates these steps. The following steps will
|
|
|
|
|
|
accomplish the same configuration:
|
2007-03-23 03:24:38 +01:00
|
|
|
|
|
2013-01-04 22:37:31 +01:00
|
|
|
|
cd tools
|
|
|
|
|
|
./configure.sh <board-name>/<config-dir>
|
2011-03-18 18:22:50 +01:00
|
|
|
|
|
2013-01-04 22:37:31 +01:00
|
|
|
|
There is an alternative Windows batch file that can be used in the
|
|
|
|
|
|
windows native enironment like:
|
2012-11-06 14:36:51 +01:00
|
|
|
|
|
2013-01-04 22:37:31 +01:00
|
|
|
|
cd ${TOPDIR}\tools
|
|
|
|
|
|
configure.bat <board-name>\<config-dir>
|
|
|
|
|
|
|
|
|
|
|
|
See tools/README.txt for more information about these scripts.
|
|
|
|
|
|
|
2014-03-06 20:00:50 +01:00
|
|
|
|
And if your application directory is not in the standard loction (../apps
|
|
|
|
|
|
or ../apps-<version>), then you should also specify the location of the
|
|
|
|
|
|
application directory on the command line like:
|
2013-01-04 22:37:31 +01:00
|
|
|
|
|
|
|
|
|
|
cd tools
|
|
|
|
|
|
./configure.sh -a <app-dir> <board-name>/<config-dir>
|
2012-09-01 17:33:33 +02:00
|
|
|
|
|
|
|
|
|
|
Building Symbol Tables
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
Symbol tables are needed at several of the binfmt interfaces in order to bind
|
|
|
|
|
|
a module to the base code. These symbol tables can be tricky to create and
|
|
|
|
|
|
will probably have to be tailored for any specific application, balancing
|
|
|
|
|
|
the number of symbols and the size of the symbol table against the symbols
|
|
|
|
|
|
required by the applications.
|
|
|
|
|
|
|
|
|
|
|
|
The top-level System.map file is one good source of symbol information
|
|
|
|
|
|
(which, or course, was just generated from the top-level nuttx file
|
|
|
|
|
|
using the GNU 'nm' tool).
|
|
|
|
|
|
|
|
|
|
|
|
There are also common-separated value (CSV) values in the source try that
|
|
|
|
|
|
provide information about symbols. In particular:
|
|
|
|
|
|
|
|
|
|
|
|
nuttx/syscall/syscall.csv - Describes the NuttX RTOS interface, and
|
2014-06-27 16:14:07 +02:00
|
|
|
|
nuttx/lib/libc.csv - Describes the NuttX C library interface.
|
2012-09-01 17:33:33 +02:00
|
|
|
|
|
|
|
|
|
|
There is a tool at nuttx/tools/mksymtab that will use these CSV files as
|
|
|
|
|
|
input to generate a generic symbol table. See nuttx/tools/README.txt for
|
|
|
|
|
|
more information about using the mksymtab tool.
|
