nuttx/drivers/ioexpander/Kconfig

324 lines
7.8 KiB
Plaintext
Raw Normal View History

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
menu "IO Expander/GPIO Support"
config IOEXPANDER
bool "Enable IO Expander Support"
default n
---help---
This directory holds implementations of IO expander drivers.
See include/nuttx/ioexpander/ioexpander.h for registration information.
if IOEXPANDER
config IOEXPANDER_RPMSG
bool "IO expander rpmsg server and client"
default n
---help---
This settings enable ioexpander rpmsg server and client.
if IOEXPANDER_RPMSG
config IOEXPANDER_RPMSG_INT_NCALLBACKS
int "number of ioexpander rpmsg interrupt callbacks"
default 32
select IOEXPANDER_INT_ENABLE
---help---
This set the IO expander number in interrupt callbacks.
endif # IOEXPANDER_RPMSG
config IOEXPANDER_MCP23X17
bool "MCP23017/MCP23S17 I2C/SPI IO expander"
default n
depends on I2C
---help---
Enable support for the MCP23017/MCP23S17 IO Expander
if IOEXPANDER_MCP23X17
config MCP23X17_MULTIPLE
bool "Multiple MCP23x17 Devices"
default n
---help---
Can be defined to support multiple MCP23x17 devices on board.
config MCP23X17_INT_ENABLE
bool "Enable MCP23x17 Interrupt Support"
default n
select IOEXPANDER_INT_ENABLE
---help---
Enable driver interrupt functionality
config MCP23X17_INT_NCALLBACKS
int "Max number of interrupt callbacks"
default 4
depends on MCP23X17_INT_ENABLE
---help---
This is the maximum number of interrupt callbacks supported
config MCP23X17_INT_POLL
bool "Enable interrupt poll"
default n
---help---
Enable polling for missed interrupts.
config MCP23X17_INT_POLLDELAY
int "Interrupt poll delay (used)"
default 500000
depends on MCP23X17_INT_POLL
---help---
This microsecond delay defines the polling rate for missed interrupts.
endif # IOEXPANDER_MCP23X17
config IOEXPANDER_PCA9555
bool "PCA9555 I2C IO expander"
default n
depends on I2C
---help---
Enable support for the NXP PCA9555 IO Expander
if IOEXPANDER_PCA9555
config PCA9555_MULTIPLE
bool "Multiple PCA9555 Devices"
default n
---help---
Can be defined to support multiple PCA9555 devices on board.
config PCA9555_INT_ENABLE
bool "Enable PCA9555 Interrupt Support"
default n
select IOEXPANDER_INT_ENABLE
---help---
Enable driver interrupt functionality
config PCA9555_INT_NCALLBACKS
int "Max number of interrupt callbacks"
default 4
depends on PCA9555_INT_ENABLE
---help---
This is the maximum number of interrupt callbacks supported
config PCA9555_SHADOW_MODE
bool "Use Shadow Mode instead of Read-Modify-Write Operations"
default n
---help---
This setting enables a mode where the output and pin
configuration registers are held in RAM.
With this for example we do not need to read back the
output-register every time we want to change one pin.
We do instead change the bit in the internal register
and then just write this register to the IO-Expander.
This reduces bus traffic and eliminates the problem of
EMC-caused toggling of output pins.
config PCA9555_RETRY
bool "Retry to send commands and data at I2C communication errors"
default n
---help---
Retry to send commands and data if a I2C-communication
error occurs (eg. caused by EMC).
endif # IOEXPANDER_PCA9555
config IOEXPANDER_PCA9538
bool "PCA9538 I2C IO expander"
default n
depends on I2C
---help---
Enable support for the NXP PCA9538 IO Expander
if IOEXPANDER_PCA9538
config PCA9538_MULTIPLE
bool "Multiple PCA9538 Devices"
default n
---help---
Can be defined to support multiple PCA9538 devices on board.
config PCA9538_INT_ENABLE
bool "Enable PCA9538 Interrupt Support"
default n
select IOEXPANDER_INT_ENABLE
---help---
Enable driver interrupt functionality
config PCA9538_INT_NCALLBACKS
int "Max number of interrupt callbacks"
default 4
depends on PCA9538_INT_ENABLE
---help---
This is the maximum number of interrupt callbacks supported
config PCA9538_SHADOW_MODE
bool "Use Shadow Mode instead of Read-Modify-Write Operations"
default n
---help---
This setting enables a mode where the output and pin
configuration registers are held in RAM.
With this for example we do not need to read back the
output-register every time we want to change one pin.
We do instead change the bit in the internal register
and then just write this register to the IO-Expander.
This reduces bus traffic and eliminates the problem of
EMC-caused toggling of output pins.
config PCA9538_RETRY
bool "Retry to send commands and data at I2C communication errors"
default n
---help---
Retry to send commands and data if a I2C-communication
error occurs (eg. caused by EMC).
endif # IOEXPANDER_PCA9538
config IOEXPANDER_TCA64XX
bool "TCA64XX I2C IO expander"
default n
depends on I2C && EXPERIMENTAL
---help---
Enable support for the TCA64XX IO Expander
if IOEXPANDER_TCA64XX
config TCA64XX_MULTIPLE
bool "Multiple TCA64XX Devices"
default n
---help---
Can be defined to support multiple TCA64XX devices on board.
config TCA64XX_INT_ENABLE
bool "Enable TCA64XX Interrupt Support"
default n
select IOEXPANDER_INT_ENABLE
---help---
Enable driver interrupt functionality
config TCA64XX_INT_NCALLBACKS
int "Max number of interrupt callbacks"
default 4
depends on TCA64XX_INT_ENABLE
---help---
This is the maximum number of interrupt callbacks supported
config TCA64XX_INT_POLL
bool "Enable interrupt poll"
default n
---help---
Enable polling for missed interrupts.
config TCA64XX_INT_POLLDELAY
int "Interrupt poll delay (used)"
default 500000
depends on TCA64XX_INT_POLL
---help---
This microsecond delay defines the polling rate for missed interrupts.
endif # IOEXPANDER_TCA64XX
config IOEXPANDER_PCF8574
bool "PCF8574 I2C IO expander"
default n
depends on I2C && EXPERIMENTAL
---help---
Enable support for the PCF8574 IO Expander
if IOEXPANDER_PCF8574
config PCF8574_MULTIPLE
bool "Multiple PCF8574 Devices"
default n
---help---
Can be defined to support multiple PCF8574 devices on board.
config PCF8574_INT_ENABLE
bool "Enable PCF8574 Interrupt Support"
default n
select IOEXPANDER_INT_ENABLE
---help---
Enable driver interrupt functionality
config PCF8574_INT_NCALLBACKS
int "Max number of interrupt callbacks"
default 4
depends on PCF8574_INT_ENABLE
---help---
This is the maximum number of interrupt callbacks supported
config PCF8574_INT_POLL
bool "Enable interrupt poll"
default n
---help---
Enable polling for missed interrupts.
config PCF8574_INT_POLLDELAY
int "Interrupt poll delay (used)"
default 500000
depends on PCF8574_INT_POLL
---help---
This microsecond delay defines the polling rate for missed interrupts.
endif # IOEXPANDER_PCF8574
config IOEXPANDER_INT_ENABLE
bool
default n
---help---
This is the global INT supported flag for io expanders
config IOEXPANDER_NPINS
int "Number of pins"
default 16
---help---
Maximum number of pins supported per driver.
config IOEXPANDER_MULTIPIN
bool "Support multi-pin access routines"
default n
---help---
This settings enable the definition of routines for
optimized simultaneous access to multiple pins.
endif # IOEXPANDER
config DEV_GPIO
bool "GPIO driver"
default n
---help---
Enables a simple GPIO input/output driver to support application-
space testing of hardware.
config DEV_GPIO_NSIGNALS
int "Max number of signals"
default 1
depends on DEV_GPIO
---help---
The maximum number of signals that can be registered with the GPIO
driver
config GPIO_LOWER_HALF
bool "GPIO Lower Half"
default n
depends on DEV_GPIO && IOEXPANDER
---help---
Enable support for a lower half driver that provides GPIO driver
support for I/O expander pins.
if GPIO_LOWER_HALF
config GPIO_LOWER_HALF_INTTYPE
int "default interrupt type for GPIO_INTERRUPT_PIN pintype"
default 14
---help---
This is the default interrupt type (IOEXPANDER_VAL_BOTH) for
GPIO_INTERRUPT_PIN pintype in gplf driver register.
endif
endmenu # IO Expander/GPIO Support