nuttx/configs/olimex-stm32-h405/src/stm32_nsh.c

/****************************************************************************
 * config/olimex-stm32-h405/src/stm32_nsh.c
 *
 *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdbool.h>
#include <stdio.h>
#include <syslog.h>
#include <errno.h>

#ifdef CONFIG_SYSTEM_USBMONITOR
#  include <apps/usbmonitor.h>
#endif

#ifdef CONFIG_STM32_OTGFS
#  include "stm32_usbhost.h"
#endif

#include "stm32.h"
#include "olimex-stm32-h405.h"

/****************************************************************************
 * Pre-Processor Definitions
 ****************************************************************************/

#if !defined(CONFIG_STM32_CAN1) && !defined(CONFIG_STM32_CAN2)
#  undef CONFIG_CAN
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nsh_archinitialize
 *
 * Description:
 *   Perform architecture specific initialization
 *
 *   CONFIG_NSH_ARCHINIT=y :
 *     Called from the NSH library
 *
 *   CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
 *   CONFIG_NSH_ARCHINIT=n :
 *     Called from board_initialize().
 *
 ****************************************************************************/

int nsh_archinitialize(void)
{
#if defined(CONFIG_CAN) || defined(CONFIG_ADC)
  int ret;
#endif

#ifdef CONFIG_CAN
  /* Configure on-board CAN if CAN support has been selected. */

  ret = stm32_can_initialize();
  if (ret != OK)
    {
      syslog(LOG_ERR, "ERROR: Failed to initialize CAN: %d\n", ret);
    }
#endif

#ifdef CONFIG_ADC
  /* Configure on-board ADCs if ADC support has been selected. */

  ret = stm32_adc_initialize();
  if (ret != OK)
    {
      syslog(LOG_ERR, "ERROR: Failed to initialize ADC: %d\n", ret);
    }
#endif

  return OK;
}