nuttx/boards/xtensa/esp32/esp32-devkitc/scripts/esp32.template.ld

/****************************************************************************
 * boards/xtensa/esp32/esp32-devkitc/scripts/esp32.template.ld
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * ESP32 Linker Script Memory Layout
 *
 * This file describes the memory layout (memory blocks) as virtual
 * memory addresses.
 *
 * esp32.ld contains output sections to link compiler output
 * into these memory blocks.
 *
 * NOTE: That this is not the actual linker script but rather a "template"
 * for the esp32_out.ld script.  This template script is passed through
 * the C preprocessor to include selected configuration options.
 *
 ****************************************************************************/

#include <nuttx/config.h>

MEMORY
{
  /* All these values assume the flash cache is on, and have the blocks this
   * uses subtracted from the length of the various regions. The 'data access
   * port' dram/drom regions map to the same iram/irom regions but are
   * connected to the data port of the CPU and eg allow bytewise access.
   */

  /* IRAM for PRO cpu. Not sure if happy with this, this is MMU area... */

  iram0_0_seg (RX) :     org = 0x40080000, len = 0x20000

  /* Flash mapped instruction data.
   *
   * The 0x20 offset is a convenience for the app binary image generation.
   * Flash cache has 64KB pages. The .bin file which is flashed to the chip
   * has a 0x18 byte file header, and each segment has a 0x08 byte segment
   * header. Setting this offset makes it simple to meet the flash cache MMU's
   * constraint that (paddr % 64KB == vaddr % 64KB).)
   */

  irom0_0_seg (RX) :     org = 0x400d0020, len = 0x330000 - 0x20

  /* Shared data RAM, excluding memory reserved for ROM bss/data/stack.
   * Enabling Bluetooth & Trace Memory features in menuconfig will decrease
   * the amount of RAM available.
   *
   * Note: The length of this section should be 0x50000, and this extra
   * DRAM is available in heap at runtime. However due to static ROM memory
   * usage at this 176KB mark, the additional static memory temporarily cannot
   * be used.
   */

  dram0_0_seg (RW) :     org = 0x3ffb0000 + CONFIG_ESP32_BT_RESERVE_DRAM,
                         len = 0x2c200 - CONFIG_ESP32_TRACEMEM_RESERVE_DRAM - CONFIG_ESP32_BT_RESERVE_DRAM

  /* Flash mapped constant data */

  drom0_0_seg (R) :      org = 0x3f400020, len = 0x400000 - 0x20

  /* RTC fast memory (executable). Persists over deep sleep. */

  rtc_iram_seg(RWX) :    org = 0x400c0000, len = 0x2000

  /* RTC slow memory (data accessible). Persists over deep sleep.
   * Start of RTC slow memory is reserved for ULP co-processor code + data,
   * if enabled.
   */

  rtc_slow_seg(RW)  :    org = 0x50000000 + CONFIG_ESP32_ULP_COPROC_RESERVE_MEM,
                         len = 0x1000 - CONFIG_ESP32_ULP_COPROC_RESERVE_MEM

  /* External memory, including data and text */

  extmem_seg(RWX)  :  org = 0x3f800000, len = 0x400000
}

#if CONFIG_ESP32_DEVKIT_RUN_IRAM
  REGION_ALIAS("default_rodata_seg", dram0_0_seg);
  REGION_ALIAS("default_code_seg", iram0_0_seg);
#else
  REGION_ALIAS("default_rodata_seg", drom0_0_seg);
  REGION_ALIAS("default_code_seg", irom0_0_seg);
#endif /* CONFIG_ESP32_DEVKIT_RUN_IRAM */

/* Heap ends at top of dram0_0_seg */

_eheap = 0x40000000 - CONFIG_ESP32_TRACEMEM_RESERVE_DRAM;

/* IRAM heap ends at top of dram0_0_seg */

_eiramheap = 0x400a0000;

/* Mark the end of the RTC heap (top of the RTC region) */

_ertcheap = 0x50001fff;