nuttx/boards/demo9s12ne64/include/board.h

94 lines
3.9 KiB
C
Raw Normal View History

/************************************************************************************
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
* boards/demo9s12ne64/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* Frequency of the crystal oscillator */
#define HCS12_OSCCLK 16000000 /* 16MHz */
/* PLL Settings
*
* SYNR register controls the multiplication factor of the PLL. If the PLL is on, the
* count in the loop divider (SYNR) register effectively multiplies up the PLL clock
* (PLLCLK) from the reference frequency by 2 x (SYNR+1). PLLCLK will not be below
* the minimum VCO frequency (fSCM).
*
* The REFDV register provides a finer granularity for the PLL multiplier steps. The
* count in the reference divider divides OSCCLK frequency by REFDV + 1.
*
* PLLCLK = 2 * OSCCLK * (SYNR + 1) / (REFDV + 1)
*
* If (PLLSEL = 1), Bus Clock = PLLCLK / 2
*/
#define HCS12_SYNR_VALUE 0x15
#define HCS12_REFDV_VALUE 0x15
#define HCS12_PLLCLK (2*HCS12_OSCCLK*(HCS12_SYNR+1)/(HCS12_REFDV+1))
#define HCS12_BUSCLK (HSC12_PLLCLK/2)
/* LED definitions ******************************************************************/
/* The DEMO9S12NE64 board has 2 LEDs that we will encode as: */
#define LED_STARTED 1 /* LED1 */
#define LED_HEAPALLOCATE 1 /* LED1 */
#define LED_IRQSENABLED 1 /* LED1 */
#define LED_STACKCREATED 1 /* LED1 */
#define LED_INIRQ 2 /* LED1 + LED2 */
#define LED_SIGNAL 2 /* LED1 + LED2 */
#define LED_ASSERTION 2 /* LED1 + LED2 */
#define LED_PANIC 7 /* LED2 + N/C */
/* Button definitions ***************************************************************/
#endif /* __ARCH_BOARD_BOARD_H */