nuttx/drivers/1wire/1wire.c

/****************************************************************************
 * drivers/1wire/1wire.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>
#include <nuttx/nuttx.h>

#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <string.h>

#include <nuttx/kmalloc.h>
#include <nuttx/1wire/1wire_master.h>
#include <nuttx/1wire/1wire.h>

#include "1wire_internal.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

#define MATCH_FAMILY(rom, family) ((family) == 0 || ((rom) & 0xff) == (family))

#ifndef CONFIG_ENDIAN_BIG
#  define onewire_leuint64(x) (x)
#  define onewire_leuint32(x) (x)
#endif

#define NO_HOLDER     (INVALID_PROCESS_ID)

/****************************************************************************
 * Private Function Prototypes
 ****************************************************************************/

#ifdef CONFIG_PM
static int onewire_pm_prepare(FAR struct pm_callback_s *cb, int domain,
                              enum pm_state_e pmstate);
#endif

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: onewire_leuint64
 *
 * Description:
 *   Get a 64-bit value stored in little endian order for a big-endian
 *   machine.
 *
 ****************************************************************************/

#ifdef CONFIG_ENDIAN_BIG
static inline uint64_t onewire_leuint64(uint64_t x)
{
  return (((x & 0xff00000000000000ull) >> 56) |
          ((x & 0x00ff000000000000ull) >> 40) |
          ((x & 0x0000ff0000000000ull) >> 24) |
          ((x & 0x000000ff00000000ull) >> 8)  |
          ((x & 0x00000000ff000000ull) << 8)  |
          ((x & 0x0000000000ff0000ull) << 24) |
          ((x & 0x000000000000ff00ull) << 40) |
          ((x & 0x00000000000000ffull) << 56));
}
#endif

/****************************************************************************
 * Name: onewire_leuint32
 *
 * Description:
 *   Get a 32-bit value stored in little endian order for a big-endian
 *   machine.
 *
 ****************************************************************************/

#ifdef CONFIG_ENDIAN_BIG
static inline uint32_t onewire_leuint32(uint32_t x)
{
  return (((x & 0xff000000) >> 24) |
          ((x & 0x00ff0000) >> 8)  |
          ((x & 0x0000ff00) << 8)  |
          ((x & 0x000000ff) << 24));
}
#endif

/****************************************************************************
 * Name: onewire_pm_prepare
 *
 * Description:
 *   Request the driver to prepare for a new power state. This is a
 *   warning that the system is about to enter into a new power state.  The
 *   driver should begin whatever operations that may be required to enter
 *   power state.  The driver may abort the state change mode by returning
 *   a non-zero value from the callback function.
 *
 * Input Parameters:
 *   cb      - Returned to the driver.  The driver version of the callback
 *             structure may include additional, driver-specific state
 *             data at the end of the structure.
 *   domain  - Identifies the activity domain of the state change
 *   pmstate - Identifies the new PM state
 *
 * Returned Value:
 *   0 (OK) means the event was successfully processed and that the driver
 *   is prepared for the PM state change.  Non-zero means that the driver
 *   is not prepared to perform the tasks needed achieve this power setting
 *   and will cause the state change to be aborted.  NOTE:  The prepare
 *   method will also be recalled when reverting from lower back to higher
 *   power consumption modes (say because another driver refused a lower
 *   power state change).  Drivers are not permitted to return non-zero
 *   values when reverting back to higher power consumption modes!
 *
 ****************************************************************************/
#ifdef CONFIG_PM
static int onewire_pm_prepare(FAR struct pm_callback_s *cb, int domain,
                              enum pm_state_e pmstate)
{
  struct onewire_master_s *master;
  master = container_of(cb, struct onewire_master_s, pm_cb);

  /* Logic to prepare for a reduced power state goes here. */

  switch (pmstate)
    {
    case PM_NORMAL:
    case PM_IDLE:
      break;

    case PM_STANDBY:
    case PM_SLEEP:

      /* Check if exclusive lock for the bus master is held. */

      if (nxrmutex_is_locked(&master->devlock))
        {
          /* Exclusive lock is held, do not allow entry to deeper PM
           * states.
           */

          return -EBUSY;
        }

      break;

    default:

      /* Should not get here */

      break;
    }

  return OK;
}
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: onewire_reset_resume
 *
 * Description:
 *
 ****************************************************************************/

int onewire_reset_resume(FAR struct onewire_master_s *master)
{
  int ret;
  uint8_t buf[] =
  {
    ONEWIRE_CMD_RESUME
  };

  ret = ONEWIRE_RESET(master->dev);
  if (ret < 0)
    {
      return ret;
    }

  return ONEWIRE_WRITE(master->dev, buf, 1);
}

/****************************************************************************
 * Name: onewire_reset_select
 *
 * Description:
 *
 ****************************************************************************/

int onewire_reset_select(FAR struct onewire_master_s *master,
                         uint64_t romcode)
{
  uint64_t tmp;
  uint8_t skip_rom[1] =
  {
    ONEWIRE_CMD_SKIP_ROM
  };

  uint8_t match_rom[9] =
  {
    ONEWIRE_CMD_MATCH_ROM, 0
  };

  int ret;

  ret = ONEWIRE_RESET(master->dev);
  if (ret < 0)
    {
      return ret;
    }

  /* Issue skip-ROM if single slave, match-ROM otherwise. */

  if (master->nslaves == 1 || master->maxslaves == 1)
    {
      ret = ONEWIRE_WRITE(master->dev, skip_rom, sizeof(skip_rom));
    }
  else
    {
      tmp = onewire_leuint64(romcode);
      memcpy(&match_rom[1], &tmp, 8);
      ret = ONEWIRE_WRITE(master->dev, match_rom, sizeof(match_rom));
    }

  return ret;
}

/****************************************************************************
 * Name: onewire_readrom
 *
 * Description:
 *
 ****************************************************************************/

int onewire_readrom(FAR struct onewire_master_s *master, FAR uint64_t *rom)
{
  uint8_t txbuf[] =
  {
    ONEWIRE_CMD_READ_ROM
  };

  uint8_t rxbuf[8] =
  {
    0
  };

  uint64_t tmp = -1;
  int ret;

  DEBUGASSERT(master != NULL && rom != NULL);

  /* Read ROM-code of single connected slave and check its checksum. */

  ret = ONEWIRE_RESET(master->dev);
  if (ret < 0)
    {
      return ret;
    }

  ret = ONEWIRE_WRITE(master->dev, txbuf, sizeof(txbuf));
  if (ret < 0)
    {
      return ret;
    }

  ret = ONEWIRE_READ(master->dev, rxbuf, sizeof(rxbuf));
  if (ret < 0)
    {
      return ret;
    }

#ifdef CONFIG_DEBUG_I2C_INFO
  lib_dumpbuffer("onewire_readrom: rxbuf", rxbuf, sizeof(rxbuf));
#endif

  tmp = onewire_leuint64(*(uint64_t *)rxbuf);

#ifdef CONFIG_DEBUG_FEATURES
  if (!onewire_valid_rom(tmp))
    {
      i2cerr("ERROR: crc8 does not match!\n");
      ret = -EIO;
    }
#endif

  *rom = tmp;
  return ret;
}

/****************************************************************************
 * Name: onewire_triplet
 *
 * Description:
 *   Used by 1-wire search algorithm. Reads two bits and writes
 *   one based on comparison of read bits.
 *
 * Input Parameters:
 *   search_bit - Bit to write if both id_bit and cmp_id_bit match
 *
 * Output Parameters:
 *   taken_bit  - Bit indicating the direction where the search is
 *                progressing.
 *
 * Return Value:
 *   Number of valid bits or negative on error.
 *
 ****************************************************************************/

int onewire_triplet(FAR struct onewire_master_s *master,
                    uint8_t search_bit,
                    FAR uint8_t *taken_bit)
{
  int ret;
  int nvalid;
  uint8_t id_bit;
  uint8_t cmp_id_bit;

  ret = ONEWIRE_READBIT(master->dev, &id_bit);
  if (ret < 0)
    {
      return ret;
    }

  ret = ONEWIRE_READBIT(master->dev, &cmp_id_bit);
  if (ret < 0)
    {
      return ret;
    }

  if (id_bit == 1 && cmp_id_bit == 1)
    {
      /* No devices on bus */

      return 0;
    }
  else if (id_bit != cmp_id_bit)
    {
      /* Only one bit is valid, search to that direction. */

      nvalid = 1;
      *taken_bit = id_bit;
    }
  else
    {
      /* Two bits are valid, search to pre-determined direction. */

      nvalid = 2;
      *taken_bit = search_bit;
    }

  ret = ONEWIRE_WRITEBIT(master->dev, taken_bit);
  if (ret < 0)
    {
      return ret;
    }

  return nvalid;
}

/****************************************************************************
 * Name: onewire_search
 *
 * Description:
 *   Search all devices from a 1-wire network. This is the 1-wire search
 *   algorithm from Maxim Application Note 187.
 *
 * Input Parameters:
 *   master    - Pointer to the allocated 1-wire interface
 *   family    - Limit search to devices of matching family
 *   alarmonly - Limit search to devices on alarm state
 *   cb_search - Callback to call on each device found
 *   arg       - Argument passed to cb_search
 *
 * Return Value:
 *   Number of slaves present and matching family.
 *
 ****************************************************************************/

int onewire_search(FAR struct onewire_master_s *master,
                   int family,
                   bool alarmonly,
                   CODE void (*cb_search)(int family,
                                          uint64_t romcode,
                                          FAR void *arg),
                   FAR void *arg)
{
  FAR struct onewire_dev_s *dev = master->dev;
  uint8_t cmd[1];
  uint64_t rom = 0;
  uint64_t last_rom;
  int last_zero = -1;
  int last_bit = 64;      /* bit of last discrepancy */
  int nslaves = 0;
  int nslaves_match = 0;
  int ret;

  /* Disallow nested search. */

  DEBUGASSERT(master->insearch == false);

  /* Make complete search on the bus mutal exclusive */

  ret = nxrmutex_lock(&master->devlock);
  if (ret < 0)
    {
      return ret;
    }

  /* Skip costly search if bus supports only a single slave. */

  if (master->maxslaves == 1)
    {
      ret = onewire_readrom(master, &rom);
      if (ret >= 0 && MATCH_FAMILY(rom, family))
        {
          master->insearch = true;
          cb_search(rom & 0xff, rom, arg);
          master->insearch = false;
          nslaves_match++;
        }

      goto unlock;
    }

  /* Select search type. */

  cmd[0] = alarmonly ? ONEWIRE_CMD_ALARM_SEARCH : ONEWIRE_CMD_SEARCH;

  while (nslaves++ < master->maxslaves)
    {
      int i;

      /* Reset bus so slaves are ready to answer our probing. */

      ret = ONEWIRE_RESET(dev);
      if (ret < 0)
        {
          goto unlock;
        }

      /* Send the Search-ROM command. */

      ret = ONEWIRE_WRITE(dev, cmd, sizeof(cmd));
      if (ret < 0)
        {
          goto unlock;
        }

      last_rom = rom;
      rom = 0;

      /* TODO: setup initial rom from family to reduce search space. */

      for (i = 0; i < 64; i++)
        {
          uint8_t search_bit;
          uint8_t taken_bit;

          /* Setup search direction. */

          if (i == last_bit)
            {
              search_bit = 1;
            }
          else if (i > last_bit)
            {
              search_bit = 0;
            }
          else
            {
              search_bit = !!(last_rom & (1 << i));
            }

          ret = onewire_triplet(master, search_bit, &taken_bit);
          if (ret <= 0)
            {
              /* Error or zero valid directions. */

              goto unlock;
            }

          if (ret == 2 && taken_bit == 0)
            {
              /* If both directions were valid, and we took the 0 path,
               * remember this.
               */

              last_zero = i;
            }

          /* Update rom code from taken bit. */

          rom |= (uint64_t)taken_bit << i;
        }

#ifdef CONFIG_DEBUG_FEATURES
      if (!onewire_valid_rom(rom))
        {
          i2cerr("ERROR: crc8 does not match!\n");
        }
#endif

      if (last_zero == last_bit || last_zero == -1)
        {
          i2cinfo("search complete, rom=0x%" PRIx64 "\n", rom);

          /* Found last device, quit searching. */

          if (MATCH_FAMILY(rom, family))
            {
              master->insearch = true;
              cb_search(rom & 0xff, rom, arg);
              master->insearch = false;
              nslaves_match++;
            }
          break;
        }

      last_bit = last_zero;

      /* Found device, will keep looking for more. */

      if (MATCH_FAMILY(rom, family))
        {
          master->insearch = true;
          cb_search(rom & 0xff, rom, arg);
          master->insearch = false;
          nslaves_match++;
        }

      /* TODO: does not handle case when there are more than maxslaves
       * slaves present in the bus.
       */
    }

unlock:
  nxrmutex_unlock(&master->devlock);
  return (ret < 0) ? ret : nslaves_match;
}

/****************************************************************************
 * Name: onewire_addslave
 *
 * Description:
 *
 ****************************************************************************/

int onewire_addslave(FAR struct onewire_master_s *master,
                     FAR struct onewire_slave_s *slave)
{
  DEBUGASSERT(master != NULL && slave != NULL);
  DEBUGASSERT(slave->master == NULL);

  if (master->nslaves >= master->maxslaves)
    {
      return -EAGAIN;
    }

  /* TODO: linked list of slaves? */

  master->nslaves++;
  slave->master = master;
  return OK;
}

/****************************************************************************
 * Name: onewire_removeslave
 *
 * Description:
 *
 ****************************************************************************/

int onewire_removeslave(FAR struct onewire_master_s *master,
                        FAR struct onewire_slave_s *slave)
{
  DEBUGASSERT(master != NULL && slave != NULL);
  DEBUGASSERT(master->nslaves > 0 && slave->master == master);

  /* TODO: linked list of slaves? */

  master->nslaves--;
  slave->master = NULL;
  return OK;
}

/****************************************************************************
 * Name: onewire_initialize
 *
 * Description:
 *   Return 1-wire bus master from 1-wire lower half device.
 *
 * Input Parameters:
 *   dev       - Pointer to the allocated 1-wire lower half
 *   maxslaves - Maximum number of 1-wire slave devices
 *
 ****************************************************************************/

FAR struct onewire_master_s *
onewire_initialize(FAR struct onewire_dev_s *dev, int maxslaves)
{
  FAR struct onewire_master_s *master;

  DEBUGASSERT(dev != NULL);
  DEBUGASSERT(maxslaves > 0);

  master = (FAR struct onewire_master_s *)
    kmm_malloc(sizeof(struct onewire_master_s));
  if (master == NULL)
    {
      i2cerr("ERROR: Failed to allocate\n");
      return NULL;
    }

  /* Initialize the device structure */

  master->dev = dev;
  nxrmutex_init(&master->devlock);
  master->nslaves = 0;
  master->maxslaves = maxslaves;
  master->insearch = false;

#ifdef CONFIG_PM
  master->pm_cb.prepare = onewire_pm_prepare;

  /* Register to receive power management callbacks */

  pm_register(&master->pm_cb);
#endif

  return master;
}

/****************************************************************************
 * Name: onewire_uninitialize
 *
 * Description:
 *   Release 1-wire bus master.
 *
 * Input Parameters:
 *   master    - Pointer to the allocated 1-wire master
 *
 ****************************************************************************/

int onewire_uninitialize(FAR struct onewire_master_s *master)
{
#ifdef CONFIG_PM
  /* Unregister power management callbacks */

  pm_unregister(&master->pm_cb);
#endif

  /* Release resources. This does not touch the underlying onewire_dev_s */

  nxrmutex_destroy(&master->devlock);
  kmm_free(master);
  return OK;
}