nuttx/arch/arm/src/cxd56xx/Make.defs

164 lines
4.6 KiB
Plaintext
Raw Normal View History

############################################################################
# arch/arm/src/cxd56xx/Make.defs
#
# Copyright 2018 Sony Semiconductor Solutions Corporation
#
# Copyright (C) 2012-2015 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
HEAD_ASRC =
CMN_ASRCS = up_saveusercontext.S up_fullcontextrestore.S up_switchcontext.S
CMN_ASRCS += up_testset.S vfork.S
CMN_CSRCS = up_assert.c up_blocktask.c up_copyfullstate.c
CMN_CSRCS += up_createstack.c up_mdelay.c up_udelay.c up_exit.c
CMN_CSRCS += up_initialize.c up_initialstate.c up_interruptcontext.c
CMN_CSRCS += up_memfault.c up_modifyreg8.c up_modifyreg16.c up_modifyreg32.c
CMN_CSRCS += up_releasepending.c up_releasestack.c up_reprioritizertr.c
CMN_CSRCS += up_schedulesigaction.c up_sigdeliver.c up_stackframe.c
CMN_CSRCS += up_unblocktask.c up_usestack.c up_doirq.c up_hardfault.c
CMN_CSRCS += up_svcall.c up_vfork.c
ifeq ($(CONFIG_ARMV7M_LAZYFPU),y)
CMN_ASRCS += up_lazyexception.S
else
CMN_ASRCS += up_exception.S
endif
CMN_CSRCS += up_vectors.c
ifeq ($(CONFIG_ARCH_RAMVECTORS),y)
CMN_CSRCS += up_ramvec_initialize.c up_ramvec_attach.c
endif
ifeq ($(CONFIG_ARCH_MEMCPY),y)
CMN_ASRCS += up_memcpy.S
endif
ifeq ($(CONFIG_BUILD_PROTECTED),y)
CMN_CSRCS += up_mpu.c up_task_start.c up_pthread_start.c
CMN_CSRCS += up_signal_dispatch.c
CMN_UASRCS += up_signal_handler.S
endif
ifeq ($(CONFIG_STACK_COLORATION),y)
CMN_CSRCS += up_checkstack.c
endif
ifeq ($(CONFIG_ARCH_FPU),y)
CMN_ASRCS += up_fpu.S
ifneq ($(CONFIG_ARMV7M_CMNVECTOR),y)
CMN_CSRCS += up_copyarmstate.c
else ifeq ($(CONFIG_ARMV7M_LAZYFPU),y)
CMN_CSRCS += up_copyarmstate.c
endif
endif
CHIP_ASRCS += cxd56_farapistub.S
CHIP_CSRCS = cxd56_allocateheap.c cxd56_idle.c
CHIP_CSRCS += cxd56_uid.c
CHIP_CSRCS += cxd56_serial.c cxd56_uart.c cxd56_irq.c
CHIP_CSRCS += cxd56_start.c
CHIP_CSRCS += cxd56_timerisr.c
CHIP_CSRCS += cxd56_pinconfig.c
CHIP_CSRCS += cxd56_clock.c
CHIP_CSRCS += cxd56_gpio.c
CHIP_CSRCS += cxd56_pmic.c
CHIP_CSRCS += cxd56_cpufifo.c
CHIP_CSRCS += cxd56_icc.c
CHIP_CSRCS += cxd56_powermgr.c
CHIP_CSRCS += cxd56_farapi.c
CHIP_CSRCS += cxd56_sysctl.c
Merged in alinjerpelea/nuttx (pull request #902) arch: arm: cxd56xx: PM and PWM * configs: spresense: add SPI configuration add SPI configuration for spresense board Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add support for PWM add support for PWM for cxd56xx Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable PWM support enable PWM support on spresense board Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add Power Management PROCFS support the powermanager procfs support will export /proc/pm: clock power Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable powermanager procfs support The powermanager procfs is disabled by default and need to be enabled by the CONFIG_CXD56_PM_PROCFS option Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add timer driver Add timer driver for cxd56xx. NOTE The timer allows a divider of 1, 16 and 256 options Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add Watch Dog Timer Add Watch Dog Timer on cxd56xx Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable timer the platform support has been added and now we can use the timers on spresense board. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable WatchDog timer The platform support has been added and now we can use the WatchDog Timer on spresense board. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-14 20:40:06 +02:00
ifeq ($(CONFIG_CXD56_PM_PROCFS),y)
CHIP_CSRCS += cxd56_powermgr_procfs.c
endif
ifeq ($(CONFIG_CXD56_RTC),y)
CHIP_CSRCS += cxd56_rtc.c
ifeq ($(CONFIG_RTC_DRIVER),y)
CHIP_CSRCS += cxd56_rtc_lowerhalf.c
endif
endif
ifeq ($(CONFIG_CXD56_GPIO_IRQ),y)
CHIP_CSRCS += cxd56_gpioint.c
endif
ifeq ($(CONFIG_USBDEV),y)
CHIP_CSRCS += cxd56_usbdev.c
endif
ifeq ($(CONFIG_CXD56_SDIO),y)
CHIP_CSRCS += cxd56_sdhci.c
endif
ifeq ($(CONFIG_CXD56_SFC),y)
CHIP_CSRCS += cxd56_sfc.c
endif
ifeq ($(CONFIG_CXD56_SPI),y)
CHIP_CSRCS += cxd56_spi.c
endif
ifeq ($(CONFIG_CXD56_I2C),y)
CHIP_CSRCS += cxd56_i2c.c
endif
ifeq ($(CONFIG_CXD56_DMAC),y)
CHIP_CSRCS += cxd56_dmac.c
endif
Merged in alinjerpelea/nuttx (pull request #902) arch: arm: cxd56xx: PM and PWM * configs: spresense: add SPI configuration add SPI configuration for spresense board Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add support for PWM add support for PWM for cxd56xx Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable PWM support enable PWM support on spresense board Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add Power Management PROCFS support the powermanager procfs support will export /proc/pm: clock power Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable powermanager procfs support The powermanager procfs is disabled by default and need to be enabled by the CONFIG_CXD56_PM_PROCFS option Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add timer driver Add timer driver for cxd56xx. NOTE The timer allows a divider of 1, 16 and 256 options Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add Watch Dog Timer Add Watch Dog Timer on cxd56xx Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable timer the platform support has been added and now we can use the timers on spresense board. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable WatchDog timer The platform support has been added and now we can use the WatchDog Timer on spresense board. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-14 20:40:06 +02:00
ifeq ($(CONFIG_CXD56_PWM),y)
CHIP_CSRCS += cxd56_pwm.c
endif
ifeq ($(CONFIG_CXD56_SCU),y)
CHIP_CSRCS += cxd56_scu.c cxd56_scufifo.c
ifeq ($(CONFIG_CXD56_ADC),y)
CHIP_CSRCS += cxd56_adc.c
endif
ifeq ($(CONFIG_CXD56_UDMAC),y)
CHIP_CSRCS += cxd56_udmac.c
endif
endif
Merged in alinjerpelea/nuttx (pull request #902) arch: arm: cxd56xx: PM and PWM * configs: spresense: add SPI configuration add SPI configuration for spresense board Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add support for PWM add support for PWM for cxd56xx Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable PWM support enable PWM support on spresense board Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add Power Management PROCFS support the powermanager procfs support will export /proc/pm: clock power Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable powermanager procfs support The powermanager procfs is disabled by default and need to be enabled by the CONFIG_CXD56_PM_PROCFS option Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add timer driver Add timer driver for cxd56xx. NOTE The timer allows a divider of 1, 16 and 256 options Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arch: arm: cxd56xx: add Watch Dog Timer Add Watch Dog Timer on cxd56xx Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable timer the platform support has been added and now we can use the timers on spresense board. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * configs: spresense: enable WatchDog timer The platform support has been added and now we can use the WatchDog Timer on spresense board. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-14 20:40:06 +02:00
ifeq ($(CONFIG_CXD56_TIMER),y)
CHIP_CSRCS += cxd56_timer.c
endif
ifeq ($(CONFIG_CXD56_WDT),y)
CHIP_CSRCS += cxd56_wdt.c
endif