nuttx/wireless/ieee802154/mac802154_device.c

922 lines
27 KiB
C
Raw Normal View History

/****************************************************************************
* wireless/ieee802154/mac802154_device.c
*
* Copyright (C) 2017 Verge Inc. All rights reserved.
* Author: Anthony Merlino <anthony@vergeaero.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <time.h>
#include <fcntl.h>
#include <nuttx/arch.h>
#include <nuttx/kmalloc.h>
#include <nuttx/signal.h>
#include <nuttx/mm/iob.h>
#include <nuttx/wireless/ieee802154/ieee802154_device.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include "mac802154.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Device naming ************************************************************/
#define DEVNAME_FMT "/dev/ieee%d"
#define DEVNAME_FMTLEN (9 + 3 + 1)
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure describes the state of one open mac driver instance */
struct mac802154dev_open_s
{
/* Supports a singly linked list */
FAR struct mac802154dev_open_s *md_flink;
/* The following will be true if we are closing */
volatile bool md_closing;
};
struct mac802154dev_callback_s
{
/* This holds the information visible to the MAC layer */
struct mac802154_maccb_s mc_cb; /* Interface understood by the MAC layer */
FAR struct mac802154_chardevice_s *mc_priv; /* Our priv data */
};
struct mac802154_chardevice_s
{
MACHANDLE md_mac; /* Saved binding to the mac layer */
struct mac802154dev_callback_s md_cb; /* Callback information */
sem_t md_exclsem; /* Exclusive device access */
/* Hold a list of events */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
bool enableevents : 1; /* Are events enabled? */
bool geteventpending : 1; /* Is there a get event using the semaphore? */
sem_t geteventsem; /* Signaling semaphore for waiting get event */
sq_queue_t primitive_queue; /* For holding primitives to pass along */
/* The following is a singly linked list of open references to the
* MAC device.
*/
FAR struct mac802154dev_open_s *md_open;
/* Hold a list of transactions as a "readahead" buffer */
bool readpending; /* Is there a read using the semaphore? */
sem_t readsem; /* Signaling semaphore for waiting read */
sq_queue_t dataind_queue;
/* MAC Service notification information */
bool md_notify_registered;
pid_t md_notify_pid;
struct sigevent md_notify_event;
struct sigwork_s md_notify_work;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Semaphore helpers */
static inline int mac802154dev_takesem(sem_t *sem);
#define mac802154dev_givesem(s) nxsem_post(s);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
static int mac802154dev_notify(FAR struct mac802154_maccb_s *maccb,
FAR struct ieee802154_primitive_s *primitive);
static int mac802154dev_rxframe(FAR struct mac802154_chardevice_s *dev,
FAR struct ieee802154_data_ind_s *ind);
static int mac802154dev_open(FAR struct file *filep);
static int mac802154dev_close(FAR struct file *filep);
static ssize_t mac802154dev_read(FAR struct file *filep, FAR char *buffer,
size_t len);
static ssize_t mac802154dev_write(FAR struct file *filep,
FAR const char *buffer, size_t len);
static int mac802154dev_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations mac802154dev_fops =
{
mac802154dev_open , /* open */
mac802154dev_close, /* close */
mac802154dev_read , /* read */
mac802154dev_write, /* write */
2017-03-29 19:03:10 +02:00
NULL, /* seek */
mac802154dev_ioctl, /* ioctl */
NULL /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: mac802154dev_semtake
*
* Description:
* Acquire the semaphore used for access serialization.
*
****************************************************************************/
static inline int mac802154dev_takesem(sem_t *sem)
{
int ret;
/* Take the semaphore (perhaps waiting) */
ret = nxsem_wait(sem);
/* The only case that an error should occur here is if the wait were
* awakened by a signal.
*/
DEBUGASSERT(ret == OK || ret == -EINTR);
return ret;
}
/****************************************************************************
* Name: mac802154dev_open
*
* Description:
* Open the 802.15.4 MAC character device.
*
****************************************************************************/
static int mac802154dev_open(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct mac802154_chardevice_s *dev;
FAR struct mac802154dev_open_s *opriv;
int ret;
DEBUGASSERT(filep != NULL && filep->f_inode != NULL);
inode = filep->f_inode;
dev = inode->i_private;
DEBUGASSERT(dev != NULL);
/* Get exclusive access to the MAC driver data structure */
ret = mac802154dev_takesem(&dev->md_exclsem);
if (ret < 0)
{
wlerr("ERROR: mac802154dev_takesem failed: %d\n", ret);
return ret;
}
/* Allocate a new open struct */
opriv = (FAR struct mac802154dev_open_s *)
kmm_zalloc(sizeof(struct mac802154dev_open_s));
2017-03-29 19:03:10 +02:00
if (!opriv)
{
wlerr("ERROR: Failed to allocate new open struct\n");
ret = -ENOMEM;
goto errout_with_sem;
}
/* Attach the open struct to the device */
opriv->md_flink = dev->md_open;
dev->md_open = opriv;
/* Attach the open struct to the file structure */
filep->f_priv = (FAR void *)opriv;
ret = OK;
errout_with_sem:
mac802154dev_givesem(&dev->md_exclsem);
return ret;
}
/****************************************************************************
* Name: mac802154dev_close
*
* Description:
* Close the 802.15.4 MAC character device.
*
****************************************************************************/
static int mac802154dev_close(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct mac802154_chardevice_s *dev;
FAR struct mac802154dev_open_s *opriv;
FAR struct mac802154dev_open_s *curr;
FAR struct mac802154dev_open_s *prev;
irqstate_t flags;
bool closing;
int ret;
DEBUGASSERT(filep && filep->f_priv && filep->f_inode);
opriv = filep->f_priv;
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = (FAR struct mac802154_chardevice_s *)inode->i_private;
/* Handle an improbable race conditions with the following atomic test
* and set.
*
* This is actually a pretty feeble attempt to handle this. The
* improbable race condition occurs if two different threads try to
* close the driver at the same time. The rule: don't do
* that! It is feeble because we do not really enforce stale pointer
* detection anyway.
*/
flags = enter_critical_section();
closing = opriv->md_closing;
opriv->md_closing = true;
leave_critical_section(flags);
if (closing)
{
/* Another thread is doing the close */
return OK;
}
/* Get exclusive access to the driver structure */
ret = mac802154dev_takesem(&dev->md_exclsem);
if (ret < 0)
{
wlerr("ERROR: mac802154_takesem failed: %d\n", ret);
return ret;
}
/* Find the open structure in the list of open structures for the device */
for (prev = NULL, curr = dev->md_open;
curr && curr != opriv;
prev = curr, curr = curr->md_flink);
DEBUGASSERT(curr);
if (!curr)
{
wlerr("ERROR: Failed to find open entry\n");
ret = -ENOENT;
goto errout_with_exclsem;
}
/* Remove the structure from the device */
if (prev)
{
prev->md_flink = opriv->md_flink;
}
else
{
dev->md_open = opriv->md_flink;
}
/* And free the open structure */
kmm_free(opriv);
/* If there are now no open instances of the driver and a signal handler is
* not registered, purge the list of events.
*/
if (dev->md_open)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
FAR struct ieee802154_primitive_s *primitive;
primitive =
(FAR struct ieee802154_primitive_s *)sq_remfirst(&dev->primitive_queue);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
while (primitive)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
ieee802154_primitive_free(primitive);
primitive =
(FAR struct ieee802154_primitive_s *)sq_remfirst(&dev->primitive_queue);
}
}
ret = OK;
errout_with_exclsem:
mac802154dev_givesem(&dev->md_exclsem);
return ret;
}
/****************************************************************************
* Name: mac802154dev_read
*
* Description:
* Return the last received packet.
*
****************************************************************************/
2017-03-29 19:03:10 +02:00
static ssize_t mac802154dev_read(FAR struct file *filep, FAR char *buffer,
size_t len)
{
FAR struct inode *inode;
FAR struct mac802154_chardevice_s *dev;
FAR struct mac802154dev_rxframe_s *rx;
FAR struct ieee802154_data_ind_s *ind;
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
struct ieee802154_get_req_s req;
int ret;
DEBUGASSERT(filep && filep->f_inode);
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = (FAR struct mac802154_chardevice_s *)inode->i_private;
/* Check to make sure the buffer is the right size for the struct */
if (len != sizeof(struct mac802154dev_rxframe_s))
{
wlerr("ERROR: buffer isn't a mac802154dev_rxframe_s: %lu\n",
(unsigned long)len);
return -EINVAL;
}
DEBUGASSERT(buffer != NULL);
rx = (FAR struct mac802154dev_rxframe_s *)buffer;
while (1)
{
/* Get exclusive access to the driver structure */
ret = mac802154dev_takesem(&dev->md_exclsem);
if (ret < 0)
{
wlerr("ERROR: mac802154dev_takesem failed: %d\n", ret);
return ret;
}
/* Try popping a data indication off the list */
ind = (FAR struct ieee802154_data_ind_s *)sq_remfirst(&dev->dataind_queue);
/* If the indication is not null, we can exit the loop and copy the data */
if (ind != NULL)
{
mac802154dev_givesem(&dev->md_exclsem);
break;
}
/* If this is a non-blocking call, or if there is another read operation
* already pending, don't block. This driver returns EAGAIN even when
* configured as non-blocking if another read operation is already pending
* This situation should be rare. It will only occur when there are 2 calls
* to read from separate threads and there was no data in the rx list.
*/
if ((filep->f_oflags & O_NONBLOCK) || dev->readpending)
{
mac802154dev_givesem(&dev->md_exclsem);
return -EAGAIN;
}
dev->readpending = true;
mac802154dev_givesem(&dev->md_exclsem);
/* Wait to be signaled when a frame is added to the list */
ret = nxsem_wait(&dev->readsem);
if (ret < 0)
{
DEBUGASSERT(ret == -EINTR || ret == -ECANCELED);
dev->readpending = false;
return ret;
}
/* Let the loop wrap back around, we will then pop a indication and this
* time, it should have a data indication
*/
}
/* Check if the MAC layer is in promiscuous mode. */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
req.attr = IEEE802154_ATTR_MAC_PROMISCUOUS_MODE;
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
ret = mac802154_ioctl(dev->md_mac, MAC802154IOC_MLME_GET_REQUEST,
(unsigned long)&req);
if (ret == 0 && req.attrval.mac.promisc_mode)
{
/* If it is, add the FCS back into the frame by increasing the length
* by the PHY layer's FCS length.
*/
req.attr = IEEE802154_ATTR_PHY_FCS_LEN;
ret = mac802154_ioctl(dev->md_mac, MAC802154IOC_MLME_GET_REQUEST,
(unsigned long)&req);
if (ret == OK)
{
rx->length = ind->frame->io_len + req.attrval.phy.fcslen;
rx->offset = ind->frame->io_offset;
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Copy the entire frame from the IOB to the user supplied struct */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
memcpy(&rx->payload[0], &ind->frame->io_data[0], rx->length);
}
else
{
rx->length = (ind->frame->io_len - ind->frame->io_offset);
rx->offset = 0;
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Copy just the payload from the IOB to the user supplied struct */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
memcpy(&rx->payload[0], &ind->frame->io_data[ind->frame->io_offset],
rx->length);
}
memcpy(&rx->meta, ind, sizeof(struct ieee802154_data_ind_s));
/* Zero out the forward link and IOB reference */
rx->meta.flink = NULL;
rx->meta.frame = NULL;
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Free the IOB */
iob_free(ind->frame, IOBUSER_WIRELESS_MAC802154_CHARDEV);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Deallocate the data indication */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
ieee802154_primitive_free((FAR struct ieee802154_primitive_s *)ind);
return OK;
}
/****************************************************************************
* Name: mac802154dev_write
*
* Description:
* Send a packet over the IEEE802.15.4 network.
*
****************************************************************************/
static ssize_t mac802154dev_write(FAR struct file *filep,
2017-03-29 19:03:10 +02:00
FAR const char *buffer, size_t len)
{
FAR struct inode *inode;
FAR struct mac802154_chardevice_s *dev;
FAR struct mac802154dev_txframe_s *tx;
FAR struct iob_s *iob;
int ret;
DEBUGASSERT(filep && filep->f_inode);
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = (FAR struct mac802154_chardevice_s *)inode->i_private;
/* Check if the struct is the correct size */
if (len != sizeof(struct mac802154dev_txframe_s))
{
wlerr("ERROR: buffer isn't a mac802154dev_txframe_s: %lu\n",
(unsigned long)len);
return -EINVAL;
}
DEBUGASSERT(buffer != NULL);
tx = (FAR struct mac802154dev_txframe_s *)buffer;
/* Allocate an IOB to put the frame in */
iob = iob_alloc(false, IOBUSER_WIRELESS_MAC802154_CHARDEV);
DEBUGASSERT(iob != NULL);
iob->io_flink = NULL;
iob->io_len = 0;
iob->io_offset = 0;
iob->io_pktlen = 0;
/* Get the MAC header length */
ret = mac802154_get_mhrlen(dev->md_mac, &tx->meta);
if (ret < 0)
{
wlerr("ERROR: TX meta-data is invalid");
return ret;
}
iob->io_offset = ret;
iob->io_len = iob->io_offset;
memcpy(&iob->io_data[iob->io_offset], tx->payload, tx->length);
iob->io_len += tx->length;
/* Pass the request to the MAC layer */
ret = mac802154_req_data(dev->md_mac, &tx->meta, iob);
if (ret < 0)
{
iob_free(iob, IOBUSER_WIRELESS_MAC802154_CHARDEV);
wlerr("ERROR: req_data failed %d\n", ret);
return ret;
}
return OK;
}
/****************************************************************************
* Name: mac802154dev_ioctl
*
* Description:
* Control the MAC layer via IOCTL commands.
*
****************************************************************************/
static int mac802154dev_ioctl(FAR struct file *filep, int cmd,
unsigned long arg)
{
FAR struct inode *inode;
FAR struct mac802154_chardevice_s *dev;
FAR union ieee802154_macarg_u *macarg =
(FAR union ieee802154_macarg_u *)((uintptr_t)arg);
int ret;
2017-03-29 19:03:10 +02:00
DEBUGASSERT(filep != NULL && filep->f_priv != NULL &&
filep->f_inode != NULL);
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = (FAR struct mac802154_chardevice_s *)inode->i_private;
/* Get exclusive access to the driver structure */
ret = mac802154dev_takesem(&dev->md_exclsem);
if (ret < 0)
{
wlerr("ERROR: mac802154dev_takesem failed: %d\n", ret);
return ret;
}
switch (cmd)
{
/* Command: MAC802154IOC_NOTIFY_REGISTER
* Description: Register to receive a signal whenever there is a
* event primitive sent from the MAC layer.
* Argument: The signal number to use.
* Return: Zero (OK) on success. Minus one will be returned on
* failure with the errno value set appropriately.
*/
case MAC802154IOC_NOTIFY_REGISTER:
{
/* Save the notification events */
dev->md_notify_event = macarg->event;
dev->md_notify_pid = getpid();
dev->md_notify_registered = true;
ret = OK;
}
break;
case MAC802154IOC_GET_EVENT:
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
FAR struct ieee802154_primitive_s *primitive;
while (1)
{
/* Try popping an event off the queue */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
primitive = (FAR struct ieee802154_primitive_s *)
sq_remfirst(&dev->primitive_queue);
/* If there was an event to pop off, copy it into the user data and
* free it from the MAC layer's memory.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (primitive != NULL)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
memcpy(&macarg->primitive, primitive, sizeof(struct ieee802154_primitive_s));
/* Free the notification */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
ieee802154_primitive_free(primitive);
ret = OK;
break;
}
/* If this is a non-blocking call, or if there is another getevent
* operation already pending, don't block. This driver returns
* EAGAIN even when configured as non-blocking if another getevent
* operation is already pending This situation should be rare.
* It will only occur when there are 2 calls from separate threads
* and there was no events in the queue.
*/
if ((filep->f_oflags & O_NONBLOCK) || dev->geteventpending)
{
ret = -EAGAIN;
break;
}
dev->geteventpending = true;
mac802154dev_givesem(&dev->md_exclsem);
/* Wait to be signaled when an event is queued */
ret = nxsem_wait(&dev->geteventsem);
if (ret < 0)
{
DEBUGASSERT(ret == -EINTR || ret == -ECANCELED);
dev->geteventpending = false;
return ret;
}
/* Get exclusive access again, then loop back around and try and
* pop an event off the queue
*/
ret = mac802154dev_takesem(&dev->md_exclsem);
if (ret < 0)
{
wlerr("ERROR: mac802154dev_takesem failed: %d\n", ret);
return ret;
}
}
}
break;
case MAC802154IOC_ENABLE_EVENTS:
{
dev->enableevents = macarg->enable;
ret = OK;
}
break;
default:
{
/* Forward any unrecognized commands to the MAC layer */
ret = mac802154_ioctl(dev->md_mac, cmd, arg);
}
break;
}
mac802154dev_givesem(&dev->md_exclsem);
return ret;
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
static int mac802154dev_notify(FAR struct mac802154_maccb_s *maccb,
FAR struct ieee802154_primitive_s *primitive)
{
FAR struct mac802154dev_callback_s *cb =
(FAR struct mac802154dev_callback_s *)maccb;
FAR struct mac802154_chardevice_s *dev;
DEBUGASSERT(cb != NULL && cb->mc_priv != NULL);
dev = cb->mc_priv;
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Handle the special case for data indications or "incoming frames" */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (primitive->type == IEEE802154_PRIMITIVE_IND_DATA)
{
return mac802154dev_rxframe(dev, &primitive->u.dataind);
}
/* If there is a registered notification receiver, queue the event and signal
* the receiver. Events should be popped from the queue from the application
* at a reasonable rate in order for the MAC layer to be able to allocate new
* notifications.
*/
if (dev->enableevents && (dev->md_open != NULL || dev->md_notify_registered))
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Get exclusive access to the driver structure. We don't care about any
* signals so if we see one, just go back to trying to get access again */
while (mac802154dev_takesem(&dev->md_exclsem) != 0);
sq_addlast((FAR sq_entry_t *)primitive, &dev->primitive_queue);
/* Check if there is a read waiting for data */
if (dev->geteventpending)
{
/* Wake the thread waiting for the data transmission */
dev->geteventpending = false;
nxsem_post(&dev->geteventsem);
}
if (dev->md_notify_registered)
{
dev->md_notify_event.sigev_value.sival_int = primitive->type;
nxsig_notification(dev->md_notify_pid, &dev->md_notify_event,
SI_QUEUE, &dev->md_notify_work);
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
mac802154dev_givesem(&dev->md_exclsem);
return OK;
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* By returning a negative value, we let the MAC know that we don't want the
* primitive and it will free it for us
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
return -1;
}
/****************************************************************************
* Name: mac802154dev_rxframe
*
* Description:
* Handle received frames forward by the IEEE 802.15.4 MAC.
*
* Returned Value:
* any failure. On success, the ind and its contained iob will be freed.
* The ind will be intact if this function returns a failure.
*
****************************************************************************/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
static int mac802154dev_rxframe(FAR struct mac802154_chardevice_s *dev,
FAR struct ieee802154_data_ind_s *ind)
{
/* Get exclusive access to the driver structure. We don't care about any
* signals so if we see one, just go back to trying to get access again */
while (mac802154dev_takesem(&dev->md_exclsem) != 0);
/* Push the indication onto the list */
sq_addlast((FAR sq_entry_t *)ind, &dev->dataind_queue);
/* Check if there is a read waiting for data */
if (dev->readpending)
{
/* Wake the thread waiting for the data transmission */
dev->readpending = false;
nxsem_post(&dev->readsem);
}
/* Release the driver */
mac802154dev_givesem(&dev->md_exclsem);
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mac802154dev_register
*
* Description:
* Register a character driver to access the IEEE 802.15.4 MAC layer from
* user-space
*
* Input Parameters:
* mac - Pointer to the mac layer struct to be registerd.
* minor - The device minor number. The IEEE802.15.4 MAC character device
* will be registered as /dev/ieeeN where N is the minor number
*
* Returned Value:
* Zero (OK) is returned on success. Otherwise a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int mac802154dev_register(MACHANDLE mac, int minor)
{
FAR struct mac802154_chardevice_s *dev;
FAR struct mac802154_maccb_s *maccb;
char devname[DEVNAME_FMTLEN];
int ret;
dev = kmm_zalloc(sizeof(struct mac802154_chardevice_s));
if (!dev)
{
wlerr("ERROR: Failed to allocate device structure\n");
return -ENOMEM;
}
/* Initialize the new mac driver instance */
dev->md_mac = mac;
nxsem_init(&dev->md_exclsem, 0, 1); /* Allow the device to be opened once
* before blocking */
nxsem_init(&dev->readsem, 0, 0);
nxsem_setprotocol(&dev->readsem, SEM_PRIO_NONE);
dev->readpending = false;
sq_init(&dev->dataind_queue);
dev->geteventpending = false;
nxsem_init(&dev->geteventsem, 0, 0);
nxsem_setprotocol(&dev->geteventsem, SEM_PRIO_NONE);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
sq_init(&dev->primitive_queue);
dev->enableevents = true;
dev->md_notify_registered = false;
/* Initialize the MAC callbacks */
dev->md_cb.mc_priv = dev;
maccb = &dev->md_cb.mc_cb;
maccb->flink = NULL;
maccb->prio = CONFIG_IEEE802154_MACDEV_RECVRPRIO;
maccb->notify = mac802154dev_notify;
/* Bind the callback structure */
ret = mac802154_bind(mac, maccb);
if (ret < 0)
{
nerr("ERROR: Failed to bind the MAC callbacks: %d\n", ret);
/* Free memory and return the error */
kmm_free(dev);
return ret;
}
/* Create the character device name */
snprintf(devname, DEVNAME_FMTLEN, DEVNAME_FMT, minor);
/* Register the mac character driver */
ret = register_driver(devname, &mac802154dev_fops, 0666, dev);
if (ret < 0)
{
wlerr("ERROR: register_driver failed: %d\n", ret);
goto errout_with_priv;
}
return OK;
errout_with_priv:
nxsem_destroy(&dev->md_exclsem);
kmm_free(dev);
return ret;
}