1.add pin type to cfg gpio as wake up source
2.add IOEXPANDER_OPTION_WAKEUPCFG for set wake up option
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
"ioexpander/gpio.c", line 529: warning #186-D: pointless comparison of
unsigned integer with zero
if (pintype < GPIO_INPUT_PIN || pintype >= GPIO_NPINTYPES)
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
CC: irq/irq_initialize.c "ioexpander/gpio.c", line 386: warning #188-D: enumerated type mixed with
another type
*ptr = dev->gp_pintype;
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
There might be multiple expanders, one with interrupt used and other
without. This commit fixes initial incorrect interrupt design by
introducing ICJX_INT_ENABLE config option.
Also fixes naming of ICJX_MULTIPLE option.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
iC-JX expander has NINT (not interrupt) pin that goes to logical zero
if interrupt occurs. This commit adds support for iC-JX options settings
that allows to enable the interrupt for defined input pins.
The interrupt is handled in HP worker thread to avoid waiting for SPI
transfers in interrupt context. Board has to configure interrupt event
for GPIO pin connected to NINT.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit implements functions icjx_multireadpin and icjx_multiwritepin.
These functions can be used for multiple pin access (read/write) if
CONFIG_IOEXPANDER_MULTIPIN is selected. This access is generally
faster than one by one pin and may simplify user application.
Changes to general functions icjx_read and icjx_write were also required
to provide support for multiple data send/receive.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds basic support for iC-JX expander in SPI mode. The
expander is functional and supports both input and output pins. Further
expander functionalities (filtering, adc, interrupt support) are not
yet implemented.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds basic support for electrically isolated 8 bit expander.
The expander communicates with the MCU via SPI interface. Both single
and multiple pin read are supported.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds support for galvanic isolated ISO1H812G SPI expander.
Both single pin and multiple pin writes are supported.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Function gpio_lower_half_byname() was added to support registration of
GPIO pin by name as supported for IOexpander. Some of the code is wrapped
in new static function gpio_lower_half_internal() to avoid code
duplication.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This adds support for 16 bit io expander pcf8575. The driver is basically
the same as for pcf8574 however it is for 16 bits instead of 8 bits. Since
pcf8575 and pcf8574 can be both used on the same i2c bus the driver for
pcf8575 is implemented in a different file to reduce the code size
and complexity and to have less if statements in the driver.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Comment for pcf8574_register_update() function was incorrect as it was
probably copied from different driver function.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
