Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Unbinding `ff_currentcluster` and `f_pos`:
1. Added `ff_pos` in `struct fat_file_s`.
2. Added function `fat_zero_cluster` for doing zeroing for gap
between EOF and new position beyond EOF.
3. Added function `fat_get_sectors` for getting the sector where
`f_pos` is located, allocting new cluster when `f_pos` is beyond
EOF.
4. Modify function `fat_read`, and `fat_write` with above functions.
5. Remove redundant logics in `fat_seek` since now new cluster is
allocated when writing instead of seeking.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
When issuing an ioctl for a file that exists in a FAT32 file system,
the FAT ioctl() is first executed, but it returns -ENOSYS in
an attempt to pass through to the vfs.
Therefore, the ioctl of the VFS layer, which expects -ENOTTY,
is not processed and an error occurs.
Signed-off-by: Takeyoshi Kikuchi <kikuchi@centurysys.co.jp>
The DIRSEC_BYTENDX(f, i) is supposed to have DIRSEC_NDXMASK(f) in its expansion instead of DIRSEC_NDXMASK(fs). It went unnoticed in the codebase as DIRSEC_BYTENDX(fs, idx) is the way it is used, and it leads to a similar expansion as desired, and thus it has worked till now without any issues from this.
Signed-off-by: Saurav Pal <resyfer.dev@gmail.com>
Fix the issue where fat driver is not using the last two clusters in
the file system.
The fat parameter fs->fs_nclusters is the maximum number of data clusters;
this doesn't include the two in the beginning. Many checks in the fat driver
treat the fs->fs_nclusters-1 as being the last accessible cluster, which is not
right, the last accessible one is actually this number + 2 when the cluster
count includes the two first ones.
Normally this is not an issue when writes are being done through the same
driver, the last two clusters are just never used. But if the filesystem is
modified by external driver, for example with a populated fat created with PC,
or modifying the FS via USB-MSC, this leads to the fat driver not being able to
read anything that uses the last two clusters.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
ubsan_prologue: ================================================================================
ubsan_prologue: UBSAN: shift-out-of-bounds in fat/fs_fat32util.c:989:40
__ubsan_handle_shift_out_of_bounds: left shift of 268435455 by 4 places cannot be represented in type 'int'
ubsan_epilogue: ================================================================================
Signed-off-by: chao an <anchao@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Testing for overflow by adding a value to a variable to see if it "wraps
around" works only for unsigned integer values, because signed overflow
has undefined behavior according to the C and C++ standards.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The field of first cluster under LFN directory entry must be 0x0000. If
it is set a value other than 0, it causes a problem where the long file
name entry cannot be found on a Windows PC and the short file name is
always used. In addition, correct the macro error in big endian.
Summary:
- Due to the recent changes of wchar_t, ls command always
causes errors for the fat file system.
- This commit fixes this issue by replacing wchar_t with
uint16_t under fs/fat
Impact:
- None
Testing:
- Tested with spresense:wifi and stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
and implement all status related change function. the individual
file system change will provide in other upcoming patchset.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8fde9db8eba9586e9c8da078b67e020c26623cf4
Summary:
- On Linux, fsblkcnt_t and fsfilcnt_t are used in struct statfs
- This commit applies the same logic
Impact:
- None
Testing:
- Tested with spresense:rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Note: all attributes is guarded by PSEUDOFS_ATTRIBUTES to save the space
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I664d60382e356068fd920f08aca5b4a49d8d92a9
Follow up commit for [1] in response to the request to make the mount
behaviour configurable whether the number of free clusters is read
from the fsinfo section or computed (as the white paper suggests).
Default is the original behaviour of NUTTX, just read fsinfo.
[1] https://github.com/apache/incubator-nuttx/pull/3760
since kernel component should use UTC instead local time
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf939e1ab0af8e577105f539d2553bc67b3b3d10
Previously the value of the FSInfo section was taken as granted.
As described in the white paper of FAT [1] this value is unreliable
and has to be computed at mount time.
[1] https://www.win.tue.nl/~aeb/linux/fs/fat/fatgen103.pdf
If the current cluster is invalid, don't use the error code for calculating
the sector number. Instead just return the error code.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Since 7a046358d9 the top-level COPYING
file has been deleted and replaced by DISCLAIMER, LICENSE, and NOTICE
files. However, some references to the old COPYING file remained in
Kconfig help text and documentation.
Documentation/contributing/coding_style.rst:
Documentation/introduction/about.rst:
boards/arm/lpc17xx_40xx/olimex-lpc1766stk/README.txt:
boards/arm/sam34/arduino-due/README.txt:
boards/arm/sam34/sam4l-xplained/README.txt:
boards/arm/sama5/giant-board/README.md:
boards/arm/sama5/sama5d2-xult/README.txt:
boards/arm/sama5/sama5d4-ek/README.txt:
boards/arm/samd2l2/samd20-xplained/README.txt:
boards/arm/samd2l2/samd21-xplained/README.txt:
boards/arm/samd2l2/saml21-xplained/README.txt:
boards/arm/stm32/hymini-stm32v/README.txt:
boards/arm/stm32/stm3210e-eval/README.txt:
fs/fat/Kconfig:
libs/libc/string/Kconfig:
* Updates stale references to the old top-level COPYING file to
either LICENSE or NOTICE (or both), as appropriate in each
instance.
