Gregory Nutt
b808084e57
Move wireless IOCTLs from include/nuttx/net/ioctl to include/nuttx/wireless/wireless.h. Add some linux compatible structures to use with the IOCTL commands.
2017-03-13 09:51:31 -06:00
Gregory Nutt
c428661e18
apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.
2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5
Refresh all ARM configurations
2017-03-09 10:23:41 -06:00
Gregory Nutt
ff20d22f66
SAMv7 Ethernet: Fix a return value type.
2017-03-03 19:16:48 -06:00
Gregory Nutt
4f5e0e3519
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 15:27:55 -06:00
Gregory Nutt
0f46d714a9
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 15:10:37 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
f5f9d82d5a
arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing.
2017-03-02 08:43:33 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
4539988d00
Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero().
2017-02-22 10:41:49 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
8ab77c55cd
SAMv71-XULT: Fixes to knsh configuration. Still does not work properly.
2017-01-30 12:49:07 -06:00
Gregory Nutt
eeeb0ad112
Refresh all SAM v7 configurations
2017-01-30 11:24:32 -06:00
Gregory Nutt
d56d16595a
New apps/examples/module and sotest configuration options
2017-01-30 08:42:31 -06:00
Gregory Nutt
00e46b5966
Move gnu-elf.ld from sched/module to libc/modlib. Update paths in Make.defs files to account for new location of file
2017-01-29 09:03:01 -06:00
Gregory Nutt
2717e781f0
libc/modlib: Add build a configuration logic for a shared module library.
2017-01-29 08:55:27 -06:00
Gregory Nutt
6f5a9eb451
Olimex-stm32-p407: Add a NSH protected build configuration; Enable procfs/ in all configurations.
2017-01-23 10:38:54 -06:00
Gregory Nutt
edd9186540
ELF: Move ARMv7-A and ARMv7-R versions of ELF relocation logic to libc/machine
2017-01-21 14:40:26 -06:00
Gregory Nutt
3c4684ef5f
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
2017-01-20 09:30:07 -06:00
Gregory Nutt
4216c4b777
NxWM configurations. If using a 7-bit character set, then the cursor character cannot be 137 (graphic block). Use 95 (underscore) instead.
2017-01-08 09:21:37 -06:00
Gregory Nutt
7035d232f8
NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue.
2017-01-08 09:14:11 -06:00
Gregory Nutt
e1d9bb2ef2
Refresh all NX multi-user configurations
2017-01-08 08:06:18 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gregory Nutt
9df1b28e6c
SAMV71-XULT: Use syslog(LOG_ERR, ..) not the supposedly hidden _err() macro.
2016-12-06 17:40:52 -06:00
Gregory Nutt
35dfe25430
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
2016-12-06 08:51:37 -06:00
Gregory Nutt
55dd1c87b3
Remove all references to BOARDIOC_ADCSETUP
2016-12-05 15:31:40 -06:00
Gregory Nutt
b999e63c82
Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more.
2016-12-05 13:54:12 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Gregory Nutt
86b5f3b9ed
boardctl: Add new command to start the NX server as a kernel thread. Also refresh more configurations.
2016-12-01 15:05:57 -06:00
Gregory Nutt
6dda185e8a
NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode.
2016-12-01 13:30:24 -06:00
Gregory Nutt
44e747ebf1
Remove all references to CONFIG_NET_MULTIBUFFER from configs/
2016-11-29 15:07:30 -06:00
Gregory Nutt
b39556f625
Update READMEs
2016-11-22 09:03:50 -06:00
Gregory Nutt
3031822518
configs: Remove all traces of the no-longer existent ARCHBUTTONS example.
2016-11-22 07:37:23 -06:00
Gregory Nutt
439c72e7c8
Refresh all networking configurations due to changes in work-queue related configuration variables for Ethernet drivers.
2016-11-19 09:41:24 -06:00
Alan Carvalho de Assis
1e754402b8
Add C++ support linking with GNU toolchain newlib/stdlibc++
2016-11-03 08:50:58 -06:00
Gregory Nutt
19a2212971
The buttons example was changed to archbuttons. As a result all of the button configurations are broken and need some renaming in the defconfig files. Noted by Frank Berkert
2016-10-21 12:12:04 -06:00
Beat Küng
c7da88e383
CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used
...
This is to avoid GCC to optimize null-pointer checks away, in case the
default operator new is used together with -fno-exceptions.
2016-08-22 08:35:01 +02:00
Gregory Nutt
b071e4ce92
Refresh all STM32, EFM32, and SAMV7 configurations for SPI H/W features configuration changes
2016-08-08 12:50:14 -06:00
Gregory Nutt
f43ded46e6
Rename arch/sh to arch/renesas, cont'd
2016-08-06 14:03:38 -06:00
Gregory Nutt
10fff9011a
Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h
2016-07-21 13:34:54 -06:00
Gregory Nutt
ee9c66186c
ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers.
2016-07-20 14:02:18 -06:00
Gregory Nutt
ddcaa3d425
can.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
2016-07-20 13:15:37 -06:00
Vladimir Komendantskiy
fd51393a37
Correct typos in SAMV71-XULT and SAME70-Xplained header files.
2016-07-15 06:26:04 -06:00
Gregory Nutt
2f12de6f28
Freedom-K64F: Add hooks for automounter; Change NSH configuration to use Windows
2016-07-13 09:23:57 -06:00
Gregory Nutt
83b0e85081
Freedom K64F: Add board_initialize() hooks and bringup C file like more contemporary board configurations
2016-07-03 15:14:43 -06:00
