Gregory Nutt
927b1dcc1f
Initialize the telnet factory as part of the common architecture intialization
2015-12-07 11:40:29 -06:00
Gregory Nutt
e5e631e57f
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:07:18 -06:00
Gregory Nutt
14d7ede265
All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y
2015-11-25 17:10:41 -06:00
Gregory Nutt
076b05b460
In Kconfig of all CPUs with 16-bit address, force CONFIG_MM_SMALL=y
2015-11-23 12:16:35 -06:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
Gregory Nutt
7a63e976ad
Remove TABs
2015-10-04 16:00:42 -06:00
Gregory Nutt
6fc6d17760
Fix some spacing problems
2015-10-04 14:59:08 -06:00
Gregory Nutt
36726b1bc4
Standardize the width of all comment boxes in header files
2015-10-02 17:42:29 -06:00
Gregory Nutt
26347891ac
Apply same fix for ARMv7-M to other architectures
2015-09-30 11:21:04 -06:00
Gregory Nutt
26eada3446
In all up_initialize() functions, automatically initialize TUN driver is so configureded
2015-09-06 09:35:29 -06:00
Gregory Nutt
975d912b40
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:37 -06:00
Paul A. Patience
a0dc724a5d
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.
2015-09-01 13:47:06 -04:00
Gregory Nutt
fa9522da41
Missed one file in last commit
2015-08-24 14:30:58 -06:00
Gregory Nutt
0843af5367
Fixes that call sched_resume_scheduler and sched_suspend_scheduler must include nuttx/sched.h
2015-07-29 16:51:26 -06:00
Gregory Nutt
eddf8161a5
Add scheduler resume/suspend calls to all implementations of up_release_pending()
2015-07-26 10:13:29 -06:00
Gregory Nutt
37969b8279
Add scheduler resume/suspend calls to all implementations of up_reprioritize_rtr()
2015-07-26 09:46:28 -06:00
Gregory Nutt
838c5355eb
Correct resume scheduler hooks and add suspend scheduler hooks to all implementations of up_unblock_task
2015-07-26 09:07:47 -06:00
Gregory Nutt
a92c0a10ab
Add scheduler resume/suspend calls in all implementations of up_block_task()
2015-07-26 08:31:23 -06:00
Gregory Nutt
9d98177daa
Add logic to reset the replenish the sporadic scheduler when a task is resumed
2015-07-24 09:54:28 -06:00
Gregory Nutt
8e4f3bddb6
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
fb926e7283
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
29136e51cc
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc
Clean up and review of header files for conformance to standards
2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
Gregory Nutt
d77a19f0a2
Two r's and only two r's in the word interrupt
2015-04-23 14:04:43 -06:00
Gregory Nutt
ae15c6963c
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
a5043d5e60
Add support for dumping board-specific information on assertion. From David Sidrane
2015-03-04 07:00:29 -06:00
Gregory Nutt
429863f348
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 17:19:38 -06:00
Gregory Nutt
f0d318c124
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
2015-02-09 16:12:11 -06:00
Gregory Nutt
8bac6b71ce
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
9588b0e7a7
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
2c1f018e85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
Gregory Nutt
2330c9c842
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
db9901e2f9
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
Gregory Nutt
eb5e1616f4
Move include/nuttx/gran.h to include/nuttx/mm/gran.h
2014-09-24 06:55:26 -06:00
Gregory Nutt
998c5ee0a9
Trivial kernel build related fixes for consistency
2014-09-11 12:35:23 -06:00
Gregory Nutt
006cf7d745
Add logic to initialize the per-process user heap when each user process is started
2014-09-10 15:55:36 -06:00
Gregory Nutt
3dd3b1f5e2
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
