sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
36,133 Commits 1 Branch 0 Tags 291 MiB
1382ea5447
Commit Graph

36133 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
1382ea5447 mm/: Coding style clean-up 
Run tools/nxstyle against all C files under mm/ and correct coding standard violations.
 2020-02-13 15:16:53 +01:00
YAMAMOTO Takashi
3381ecb913 Remove CONFIG_BUILTIN_PROXY_STACKSIZE from README files 2020-02-13 17:56:47 +08:00
YAMAMOTO Takashi
ba331e8ea8 Run refresh.sh after CONFIG_BUILTIN_PROXY_STACKSIZE removal 2020-02-13 17:56:47 +08:00
YAMAMOTO Takashi
b21e809d58 sim: Use generic name (cc) than GCC specific (gcc) 
This makes it easier to use clang on ubuntu.
 2020-02-13 15:25:15 +08:00
YAMAMOTO Takashi
842392beda Makefile.host: Use generic name (cc) than GCC specific (gcc) 
This makes it easier to use clang on ubuntu.
 2020-02-13 15:25:15 +08:00
YAMAMOTO Takashi
3a1515b473 mm_mallinfo: Fix a minfo printf-format 2020-02-13 15:18:53 +08:00
YAMAMOTO Takashi
1a3f59be58 sim: Make hostfs build for macOS 
* Ignore O_DIRECT if the host OS doesn't provide it.
* Use statvfs instead of statfs. The former is in POSIX and
  more widely available these days.
 2020-02-13 15:17:36 +08:00
Gregory Nutt
7409f57d40 net/pkt: Fix inconsistent use of FAR 
Also run all .c and .h files through nxstyle (with -m 0)
 2020-02-13 15:10:34 +08:00
YAMAMOTO Takashi
710da6022d Fix comment typos 2020-02-12 20:39:47 -06:00
YAMAMOTO Takashi
22d002762b sim: Add more names to nuttx-names.dat 2020-02-12 20:39:08 -06:00
YAMAMOTO Takashi
3d425280b6 simuart: Don't assume a specific endian 2020-02-12 20:38:25 -06:00
raiden00pl
b9ad92c366 boards/arm/stm32h7/nucleo-h743zi: Add pwm example configuration 2020-02-12 11:52:57 -06:00
Nicholas Chin
e1d35096cf arch/arm/src/imxrt/Kconfig: Fixes IMXRT_HAVE_LCD to only be selected by 1052 and 1062 and misc. typos 2020-02-12 09:42:07 -08:00
Nicholas Chin
8469de724a Fixes build issues with IMXRT Qencoder 2020-02-12 09:42:07 -08:00
Gregory Nutt
cfb7561e77 arch/arm/src/armv7-a/arm_vectors.S: Fix clobbered register in SMP mode. 2020-02-12 16:49:32 +01:00
Gregory Nutt
5f306b0461 Run all .c and .h files modified by PR 249 through nxstyle. 2020-02-12 08:17:03 -06:00
Xiang Xiao
18ba6eb076 boards/sim: Update README.txt for network setup 2020-02-12 08:16:55 -06:00
Xiang Xiao
5e99e64d9f sim/net: Replace the busy polling with work 
netdriver_loop should check there is data to read before queue the work
 2020-02-12 08:16:43 -06:00
Xiang Xiao
5a00657ac4 arch/sim: Change CONFIG_NET_ETHERNET to CONFIG_SIM_NETDEV 2020-02-12 08:16:33 -06:00
Xiang Xiao
6b1187b402 arch/sim: Change the return type of netdriver_setmacaddr to void 2020-02-12 08:16:23 -06:00
Xiang Xiao
582b2af912 arch/sim: Change syslog to printf in up_tapdev.c 
since this file is compiled with host environment, can't call NuttX's syslog
 2020-02-12 08:16:08 -06:00
YAMAMOTO Takashi
882c82a038 Fix typos in comments 2020-02-12 14:07:56 +01:00
YAMAMOTO Takashi
23b30f7930 Fix typos in comments 2020-02-12 12:17:07 +01:00
YAMAMOTO Takashi
e2ce8d5169 Fix a typo in Kconfig description 2020-02-12 12:01:18 +08:00
Ouss4
2ff43fb8a8 Run files modified by PR239 through nxstyle. 2020-02-11 21:09:12 +00:00
Xiang Xiao
d5ea46c610 boards/sim: Update README.txt to inform about the xhost command. 2020-02-11 21:07:48 +00:00
Xiang Xiao
e6c67bdd78 arch/sim: Drive up_x11update by work to simplify up_idle. 2020-02-11 21:07:22 +00:00
Xiang Xiao
14a82f40d2 arch/sim: Make eventloop as an internal variable to simplify up_idle. 2020-02-11 21:07:12 +00:00
y-sugino
28d7061550 boards: stm32f4discovery: Modify a default path to a romfs image because the stm32f4discovery directory has been moved from configs/ to boards/arm/stm32/ 2020-02-11 07:35:40 -06:00
Nicholas C
c4c0d05891 arch/arm/src/imxrt; Adds clock config logic and Kconfig menus for FLEXIO on IMXRT 2020-02-10 20:36:22 -06:00
Gregory Nutt
3c0b49448a Network Loopback Driver: A configuration option to control packet size. 
Historically, the loopback driver used the largest packet size of all enabled link layer protocols.  This permitted packets to be forward via the loopbak device with no major loss of performance.  However, in experimenting with configurations where no other link layer protocols were enabled, this means the loopback packet size was set to the smallest possible size, to the SLIP minimum of 296 bytes.  This resulted in terrible loopback performance.

    This commit adds an option to increase the loopback packet size with the option CONFIG_NET_LOOPBACK_PACKETSIZE.

    The loopback driver packet buffer should be quite large.  The larger the loopback packet buffer, the better will be TCP performance of the loopback transfers.  The Linux loopback device historically used packet buffers of size 16Kb, but that was increased in recent Linux versions to 64Kb.  Those sizes may be excessive for resource constrained MCUs, however.

    The network still enforces the lower limit that is the maximum packet size of all enabled link layer protocols.  But this new option permits the loopback packet size to be increased from that.

    * net/Kconfig:  Adds CONFIG_NET_LOOPBACK_PKTSIZE option
    * include/nuttx/net/netconfig.h:  Assures that the packet size that is used is at least as large as the largest packet size of other link layer protocols.
    * drivers/net/loopback.c:  Use that larger packet size.
    * boards/sim/sim/sim/configs/tcploop/defconfig:  Set the loopback packet size to 1500
 2020-02-10 22:17:32 -03:00
Gregory Nutt
2af17da334 boards/sim: Add a TCP loopback test. 2020-02-10 21:05:08 +01:00
Ouss4
ac4e6618bb arch/mips: Clear the software interrupt through a common function 
implemented in the chip specific code.
 2020-02-10 12:40:41 -06:00
Ouss4
90043390ff arch/mips/: Fix architectures' references in Kconfigs and Toolchain.defs. 2020-02-10 12:40:41 -06:00
Ouss4
0dc1dc605d arch/mips: When a CPU implements an External Interrupt Controller, 
use the IPL bits to control masking interrupts.
 2020-02-10 12:40:41 -06:00
Xiang Xiao
d68693f74c drivers/telnet: Stop the loop if SIGSTP char is match and SIGINT not enabled 
Change-Id: I78510616e68330b0171230ca0e081c0d702a6f42
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2020-02-10 09:21:34 -06:00
liuhaitao
7ec66ccf94 Get the full directory name of the testbuild.sh no matter where called from 
Change-Id: I00cab8d97acb8e436622c0bdd4bc4bfe7374bca3
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
 2020-02-10 09:01:35 -06:00
Gregory Nutt
d09af3b7f3 Run .c and .h files modified by PR241 through nxstyle. 2020-02-10 08:57:20 -06:00
Xiang Xiao
f2f385902b arch/sim: Remove the unnecessary file guard 
since the same protection is already done in Makefile
 2020-02-10 08:57:06 -06:00
Xiang Xiao
7fd3a3bcca xarch/sim: Call pm_initialize from up_initialize directly 
We don't need the additional flexibility since sim just has one chip.
 2020-02-10 08:56:51 -06:00
Xiang Xiao
978575d79a arch/sim: Pass X11 related config to host environment 
Remove the hard code CONFIG_SIM_X11NOSHM value from up_x11framebuffer.c
 2020-02-10 08:56:37 -06:00
Xiang Xiao
856b62ca09 arch/sim: Fix X11 segmentation fault when CONFIG_SIM_X11NOSHM isn't enabled 
up_x11mapsharedmem should assign the share memory to g_framebuffer
 2020-02-10 08:56:22 -06:00
liuhaitao
bbd102808d drivers/net/telnet.c: correct typo error to fix build break 
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
 2020-02-10 10:12:10 -03:00
Xiang Xiao
0a115e4a47 nucleo-l432kc: Run refresh.sh for spwm 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2020-02-10 08:55:39 +01:00
Gregory Nutt
20f29e60e3 tools/testbuild.sh: Remove bad line from usage help. 2020-02-09 20:05:44 +01:00
Alan Carvalho de Assis
69a9f3b8ec boards/arm/stm32/stm32f4discovery: Add Ethernet SPI ENC28J60 board support to STM32F4Discovery. 2020-02-09 08:04:52 -06:00
liuhaitao
f4d8c184b0 tools/checkpatch.sh: make sure fail get the real return error value 
Do not use pipeline way and make sure fail to record the real exit error value.
 2020-02-09 07:51:27 -06:00
Xiang Xiao
a129389fe1 sim/README.txt: Update the SMP related section 2020-02-09 07:45:14 -06:00
Xiang Xiao
406a9adfdd arch/sim: fix up_idle call the wrong pthread_yield version 
The logic want the host version but link to NuttX version
 2020-02-09 07:44:51 -06:00
Xiang Xiao
e06a4226ed arch/sim: Reuse the main thread as the simulated CPU0 2020-02-09 07:43:47 -06:00