Gregory Nutt
2236a996e5
TM4C Ethernet: Add some assertions
2015-01-16 15:25:18 -06:00
Gregory Nutt
ac69e11a5f
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
d3174cdac4
Update README
2015-01-14 09:10:26 -06:00
Gregory Nutt
11eec5f5d8
Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts.
...
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer). Also, do not unconditional enable the timer out interrupt. The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
2015-01-14 07:33:59 -06:00
Gregory Nutt
db59dd2208
Tiva Timer: Remove a big chunk of unnecessary logic
2015-01-13 17:08:37 -06:00
Gregory Nutt
fe4e3f4529
Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt
2015-01-13 15:55:54 -06:00
Gregory Nutt
08638e10bd
Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress.
2015-01-13 11:49:00 -06:00
Gregory Nutt
5aab327457
DK-TM3C129X Timer: Add timer initialization logic to the board bring-up
2015-01-13 11:10:35 -06:00
Gregory Nutt
0aa32a003c
Tiva Timer: Rename tiva_timerlow.c to tiva_timerlow32.c since it only supports 32-bit periodic timers
2015-01-13 10:10:02 -06:00
Gregory Nutt
ffa34aa5db
Tiva Timer: Completes implementation of the timer driver lower half
2015-01-13 10:06:40 -06:00
Gregory Nutt
1bd74b4dcc
Tiva Timer: Allow timeout interrupts even if the reload value is zero. That is the value that is need to get an interrupt on the wrap from 0xffffffff to 0x00000000
2015-01-13 08:29:25 -06:00
Gregory Nutt
cfc0732c57
Tiva Timer: Add conditional compilation to enable/disable each timer feature. Not only does this reduce the footprint by suppressing unused features, it also protects from partially implemented features that are now conditioned on EXPERIMENTAL
2015-01-13 07:49:20 -06:00
Gregory Nutt
73e6fc8142
Tiva Timer: Rename tiva_timer.c to tiva_timerlib.c
2015-01-12 15:55:41 -06:00
Gregory Nutt
f93e69e94e
Tiva Timer: First cut at timer driver lower half (still incomplete)
2015-01-12 15:52:48 -06:00
Gregory Nutt
4510be6c7d
Tiva Interrupts: Changes corresponding to the last needed in the Tiva Kconfig file as well
2015-01-12 10:14:48 -06:00
Gregory Nutt
9e546ff37a
Tiva interrupts: Fix chip-specific interrupt un-definitions
2015-01-12 10:00:42 -06:00
Gregory Nutt
90da8aa71d
Tiva Timers: Add interfaces to read the current timer value
2015-01-12 10:00:41 -06:00
Gregory Nutt
e5a0dcd0f9
USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts
2015-01-11 08:05:09 -06:00
Gregory Nutt
b75c43f6ef
Tiva Timer: Fix a typo
2015-01-10 12:42:39 -06:00
Gregory Nutt
3c06976ba7
Tiva Timer: Implements configuration of the 32-bit RTC timer
2015-01-10 12:41:15 -06:00
Gregory Nutt
c0e1dc3b8a
Tiva Timer: Add support for RTC match interrupts
2015-01-10 12:22:37 -06:00
Gregory Nutt
a2a5c47d9d
Tive Timer: Add support for ADC trigger generation from one-shot and periodic timers for timeout and match evetns
2015-01-10 10:07:56 -06:00
Gregory Nutt
2eeca96330
Tiva Timer: Add support to set the match regiser(s) relative to the timer counter (and prescale) registers. Enable match interrupts. These are one time interruprts: After the match interrupt is dispatched, further match interrupts are disabled
2015-01-10 08:34:39 -06:00
Gregory Nutt
2871677362
Tiva Timer: Add support for input clock prescaler in 16-bit one-shot/periodic modes
2015-01-09 16:49:00 -06:00
Gregory Nutt
df48abcc47
Tiva Timer: Add logic to acknowledge Tiva Timer interrupts
2015-01-09 15:01:49 -06:00
Gregory Nutt
9ae597c441
Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module
2015-01-09 14:10:31 -06:00
Gregory Nutt
7384857658
Tiva Timer: Add more interrupt management logic
2015-01-09 13:29:03 -06:00
Gregory Nutt
626d6cdab4
Tiva Timer: Add functions to set match registers; Add logic to select count direction
2015-01-09 12:05:26 -06:00
Gregory Nutt
8552b2f679
Tiva Timer: Add interfaces to start/stop timers and to set the interval load registers.
2015-01-09 11:07:52 -06:00
Gregory Nutt
d5d3a23ac3
Tiva Timers: Add framework to support tmer interrupts
2015-01-09 10:21:59 -06:00
Gregory Nutt
1193b4aa55
STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE
2015-01-08 17:47:34 -06:00
Gregory Nutt
09bd382697
Tiva Timer: Partial support for 16- and 32-bit, oneshot and periodic timer configurations
2015-01-08 13:44:10 -06:00
Gregory Nutt
58818e1afd
Tiva Timer: Add support to select alternate clock source and 32-bit register concatenation mode.
2015-01-08 11:08:54 -06:00
Gregory Nutt
d3bc0b7223
Tiva Timer: Add register level debug support
2015-01-08 10:14:38 -06:00
Gregory Nutt
6c612cf967
Tiva Timer: Add basic framework to configure timers. Incomplete on initial commit
2015-01-08 09:47:38 -06:00
Gregory Nutt
92dc58c376
Tiva Timer: SYNC regiser is only available on GPTM0
2015-01-08 08:07:31 -06:00
Gregory Nutt
e55df605a8
Tiva Timer: Update timer register bit definitions for the LM4F
2015-01-08 08:03:47 -06:00
Gregory Nutt
1ed2956ad5
Tiva Timer: Extend timer register definitions to handle other chips
2015-01-08 07:56:00 -06:00
Gregory Nutt
1ace391fcf
MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.
...
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.
This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.
From David Sidrane
2015-01-08 06:23:42 -06:00
Gregory Nutt
5c68f0dd34
Tiva Timer: Missed one register bit field definition
2015-01-07 12:03:08 -06:00
Gregory Nutt
9eb693845e
TM4C129X Timer: Completes timer register definition header file
2015-01-07 11:43:56 -06:00
Gregory Nutt
81afc06f54
TM4C129X Timer: Add some missing addresses and some of the register bit definitions. Still incomplete
2015-01-07 10:07:47 -06:00
Gregory Nutt
28a52cbd23
TM4C129X Timer: Update addresses in the timer register definitions file. Still missing bit field definitions
2015-01-07 08:57:48 -06:00
Gregory Nutt
0748291ce9
Tiva IRQs: Fix IRQ control logic; was limited to only 64 IRQs. That is a problem for higher numbered IRQs on many platforms
2015-01-06 10:49:47 -06:00
Gregory Nutt
c429a4d93f
Tiva I2C: For TM4C, high speed mode is now configurable (but disabled as EXPERIMENTAL)
2015-01-06 10:48:08 -06:00
Gregory Nutt
10b349bd1a
Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt
2015-01-05 15:12:45 -06:00
Gregory Nutt
52c4334429
Tiva: Fixes to support building Tiva TM4C129X I2C driver
2015-01-05 13:15:40 -06:00
Gregory Nutt
67aeab7105
Tiva: Update I2C register definitions to include support for the TM4C129X
2015-01-05 13:08:07 -06:00