Gregory Nutt
6090f69bfd
Add a GPIO lower-half driver that can be used to register a GPIO character driver for accessing pins on an I/O expander.
2016-08-01 08:43:10 -06:00
Gregory Nutt
91b1006d42
I/O Expander Interface: Add argument to interrupt callback. Add a method to detach the interrupt.
2016-08-01 07:26:04 -06:00
Gregory Nutt
fb84e51d5b
Minor improvements/fixes to the TCA64xx driver.
2016-08-01 06:48:05 -06:00
Gregory Nutt
c0b83cb4b4
First (untested) cut at a TCA64XX I/O Expander driver leverages from Project Ara
2016-07-31 19:52:44 -06:00
Gregory Nutt
8fab9fb00f
Rethink last commit -- probably going down the wrong path
2016-07-31 18:33:04 -06:00
Gregory Nutt
8a67509b34
I/O Expander: Encode and extend I/O expander options to include interrupt configuration.
2016-07-31 18:19:59 -06:00
Gregory Nutt
9f00d87c07
Another update to the I/O Expander skeleton.c file
2016-07-31 17:03:25 -06:00
Gregory Nutt
bbe7a97685
Remove a duplicated line
2016-07-31 16:41:12 -06:00
Gregory Nutt
b98a966135
Another update to the I/O Expander skeleton.c file
2016-07-31 16:39:44 -06:00
Gregory Nutt
c6d65b0943
Update I/O Expander skeleton.c file
2016-07-31 15:43:36 -06:00
Gregory Nutt
99843fe5fe
I/O Expander: Update skelton file
2016-07-31 14:42:30 -06:00
Gregory Nutt
becf7e70c4
Add an I/O Expander skelton driver
2016-07-31 11:52:59 -06:00
Gregory Nutt
5f9ee79298
I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h definitons. Add support for an attach() method that may be used when any subset of pin interrupts occur.
...
PCA9555 Driver: Replace the signalling logic with a simple callback using the new definitons of ioexpander.h. This repartitioning of functionality is necessary because (1) the I/O expander driver is the lower-lower part of any driver that uses GPIOs (include the GPIO driver itself) and should not be interacting directly with the much higher level application layer. And (2) in order to be compatible with the GPIO driver (and any arbitrary upper half driver), the PCA9555 should not directly signal, but should call back into the upper half. The upper half driver that interacts directly with the application is the appropriate place to be generating signal.
2016-07-31 11:09:47 -06:00
Gregory Nutt
79c8bb7ddf
Updae more comments
2016-07-27 08:03:09 -06:00
Gregory Nutt
59e0c4411f
Correct some comments
2016-07-26 13:39:20 -06:00
Gregory Nutt
0c7f5d62e4
More comments
2016-07-26 12:13:30 -06:00
Gregory Nutt
084d200a66
PTY: Cosmetic, update some comments
2016-07-26 10:09:35 -06:00
Gregory Nutt
eaaa69da0a
serial.c: Fix an error in FIONWRITE calculation
2016-07-26 06:47:53 -06:00
Gregory Nutt
e0b4a10dfa
drivers/serial/pty.c, serial.c, usbdev/cdcacm.c, include/nuttx/fs/ioctl.h: Fix FIONWRITE and add FIONSPACE. All implementations of FIONWRITE were wrong. FIONWRITE should return the number of bytes waiting in the outgoing send queue, not the free space. Rather, FIONSPACE should return the free space in the send queue.
2016-07-25 14:06:32 -06:00
Gregory Nutt
eb94cc5419
Update some comments
2016-07-24 12:48:37 -06:00
Wolfgang Reissnegger
4f83d58b24
USBMSC: Fix reversed logic on waiting for SCSI thread start.
...
The scsi thread was waiting for the wrong condition.
However, this was masked by the fact that the code creating the scsi thread
was also holding usbmsc_scsi_lock(priv) while initializing data, hence this
lock synchronized the scsi thread start with init completion.
2016-07-23 20:11:00 -07:00
Wolfgang Reissnegger
2974d2b07e
USBMSC: Add locks when removing request from queue.
2016-07-23 20:10:41 -07:00
Wolfgang Reissnegger
81f7758848
USBMSC: Fix usbtrace() string.
2016-07-23 20:10:20 -07:00
Gregory Nutt
2d92bffdcc
Trivial change left in editor
2016-07-23 13:53:37 -06:00
Gregory Nutt
a932578e76
GPIO driver: Add support for receiving signals from interrupt pins.
2016-07-23 13:53:06 -06:00
Gregory Nutt
9a8c3572db
serial.c: Fix a race condition noted by Stefan Kolb. Between the test if the TX buffer is full and entering a critical section, bytes may be removed from the TX buffer making the wait unnecessary. The unnecessary wait is an inefficiency, but not really a problem. But with USB CDC/ACM it can be a problem because the entire TX buffer may be emptied when we lose the race. If that happens that uart_putxmitchar() can hang waiting for data to be removed from an empty TX buffer.
2016-07-22 07:47:59 -06:00
Gregory Nutt
7370d3171a
Move include/nuttx/lib.h to include/nuttx/lib/lib.h
2016-07-21 14:05:44 -06:00
Gregory Nutt
23a876ab9c
Move include/nuttx/math.h to include/nuttx/lib/math.h
2016-07-21 13:58:09 -06:00
Gregory Nutt
10fff9011a
Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h
2016-07-21 13:34:54 -06:00
Gregory Nutt
ee9c66186c
ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers.
2016-07-20 14:02:18 -06:00
Gregory Nutt
46dbbe837e
rwbuffer.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:54:38 -06:00
Gregory Nutt
1b9b3a7b47
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425
can.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
2016-07-20 13:15:37 -06:00
Gregory Nutt
e73e82a923
Move prototypes of mkfifo2() from sys/stat.h and pipe2() from unistd.h. They are non-standard and should not be in such a public place. They are not in include/nuttx/fs/fs.h (which isn't a great place either).
2016-07-20 11:57:18 -06:00
Gregory Nutt
2cacc6204a
Kconfig: If Pseudo-terminals are enabled, then pipes must be selected as well
2016-07-19 14:26:40 -06:00
Gregory Nutt
318f34fb7d
Psuedo-terminal pipe size is now configurable
2016-07-19 14:26:41 -06:00
Gregory Nutt
b28fa8a609
Move pipe() and mkpipe() to nuttx/libc. Change syscalls to pipe2() and mkfifo2()
2016-07-19 14:15:26 -06:00
Gregory Nutt
671d7fae31
Add mkfifo2() and pipe2() which are just like mkfifo() and pipe(), but allow control of the size of the underlying, in-memory circular buffer
2016-07-19 13:51:05 -06:00
Gregory Nutt
9a44f3017b
Fix a few typos in the last commit
2016-07-19 13:40:54 -06:00
Gregory Nutt
d6bf67f9ff
Alloc different sizes for pipe and fifo buffers
2016-07-19 13:34:18 -06:00
Gregory Nutt
56582e2263
Update some comments
2016-07-19 10:40:23 -06:00
Gregory Nutt
8bf4684de8
Update some comments
2016-07-19 09:53:52 -06:00
Gregory Nutt
a4458c5016
PTY: Fix a race condition in test-fifo-empty-before-read logic
2016-07-19 06:45:02 -06:00
Gregory Nutt
d9fbf4c90f
Eliminate some warnings
2016-07-18 11:27:06 -06:00
Gregory Nutt
1660329d06
Rename up_rnginitialize to devrandom_register
2016-07-18 10:55:37 -06:00
Gregory Nutt
6194467c13
PTY: Fix termios read input processing.. what was I thinking? Also, if some data was read, pty_read() should not block on the empty FIFO.
2016-07-18 08:00:56 -06:00
Gregory Nutt
e0aaa168aa
/dev/urandom: Add option to replace software PRNG with hardware TRNG.
2016-07-18 07:03:47 -06:00
Gregory Nutt
bf25eef79f
Update comments in Kconfig
2016-07-18 06:43:08 -06:00
Ken Pettit
39174da3be
Remove naming conflict in drivers/mtd/filemntd.c
2016-07-17 20:19:44 -06:00
Gregory Nutt
1b7455c171
Update comments in a Kconfig
2016-07-17 11:09:01 -06:00
Gregory Nutt
07e20479ad
/dev/random: Add configuration option to use the congruential PRNG.
2016-07-17 07:56:25 -06:00
Gregory Nutt
ffd3a31649
Rename lib_rand.c to lib_srand.c
2016-07-17 07:11:09 -06:00
David Alessio
6cefbc0c3f
This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write.
2016-07-17 06:42:26 -06:00
Gregory Nutt
ded91e451b
PTY: Add TERMIOS support.
2016-07-16 10:43:44 -06:00
Alan Carvalho de Assis
8fa14b8fed
Fix poll-related compile issues introduced with recent PTY changes
2016-07-16 07:03:38 -06:00
Gregory Nutt
6a75f2df89
PTY: Add some encode to reduce the likely of misinterpreting the return value of the file open() method
2016-07-15 17:13:21 -06:00
Gregory Nutt
4b1553d3ad
PTY: Fix some tricky issues. Now seems to be working. A lot more testing is needed
2016-07-15 14:29:32 -06:00
Gregory Nutt
4b5149b244
PTY: Fix a few errors from early testing
2016-07-15 14:09:02 -06:00
Gregory Nutt
9ecd558002
Add the correct implementation of the file_poll() function
2016-07-15 11:34:08 -06:00
Gregory Nutt
f7f7036db8
Update some comments
2016-07-15 11:15:33 -06:00
Gregory Nutt
4d1b811117
PTY: Add support for the poll() method.
2016-07-15 10:07:33 -06:00
Gregory Nutt
95555a0199
PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt()
2016-07-15 09:39:33 -06:00
Gregory Nutt
6139860c0b
PTY: Added PTY IOCTL command definitions. Add support for TIOCGPTN. LIB: Implement ptsname() and ptsname_r()
2016-07-15 08:33:47 -06:00
Gregory Nutt
bcbe9806d2
In SUSv1 model, need to tried the PTY driver pair as unlinked if the master closes its reference
2016-07-15 07:33:48 -06:00
Gregory Nutt
14c216107a
PTY: Need to free PTMX minor number is slave is unlinked
2016-07-15 07:22:36 -06:00
Gregory Nutt
e50646336b
Add PTY header files
2016-07-15 07:19:42 -06:00
Gregory Nutt
7fa5093fff
PTYs prototypes hooked into build and configuration system (as EXPERIMENTAL)
2016-07-15 06:48:10 -06:00
Gregory Nutt
ccf4bfafcb
Prototype versions of ptmx/pty suppoprt. Still under developement; not yet hooked into build or configuration system.
2016-07-14 20:20:48 -06:00
Ken Pettit
fea2aaba05
SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256, adds DEBUGASSERT for invalid geometry and additional memory debug logic. Also fixes the dangling pointer on error bug.
2016-07-14 10:31:28 -06:00
Gregory Nutt
6fda036615
Eliminate a warning
2016-07-13 14:09:51 -06:00
Gregory Nutt
74037a7951
Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #97 )
...
fixes to n25qxxx mtd driver for smartfs support, etc...
2016-07-12 12:16:13 -06:00
ziggurat29
74777499bc
alter the notion of 'blocksize' to be equivalent to 'flash write page size' in order to align with assumptions in the smartfs driver (at least, maybe other things do as well).
...
Correct a bug that was previously masked by having blocksize=eraseblocksize which would cause buffer overflows and delicious hardfaults.
Trivial spelling changes in comments, etc.
2016-07-12 11:46:08 -05:00
Sebastien Lorquet
0d41a1cd42
Before accessing the sst26 flash, the "Global Unlock" command must me executed, which I do in the sst26 driver.
...
BUT. re-reading the datasheet, the WREN instruction is required to enable the execution of this command. This was not done.
I have no idea how the driver currently works except by chance. The writes
should never happen at all, the flash is half-enabled!
2016-07-12 10:34:03 -06:00
Heath Petersen
dc72e16625
handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not enabled
2016-07-12 06:50:58 +00:00
Frank Benkert
5d3cdff16b
drivers/pipes/Kconfig: Add missing configuration for pipe ring buffer size.
2016-07-08 06:32:58 -06:00
ziggurat29
2cadf783fd
cdcacm_unbind leaks write request objects. This arises due to freeing the
...
bulk IN endpoint before the loop that frees the requests via cdcasm_freereq.
That function checks the parameters and skips the freeing if either is NULL.
Freeing the bulk IN enpoint will cause the first param to be NULL, thereby
bypassing the free operation. To fix, I moved the release of the bulk IN
endpoint until after to loop (much as was the case for the OUT and read
requests, which did not exhibit the problem).
2016-07-07 12:02:23 -05:00
Paul A. Patience
0690391d42
ioexpander/gpio: Add missing argument to gpin_read and gpout_read
2016-07-05 15:55:16 -04:00
Gregory Nutt
02b91d9880
Add a SYSLOG character device that can be used to re-direct output to the SYSLOG
2016-07-05 12:58:18 -06:00
Gregory Nutt
a39ce80add
SYSLOG logic should use existing file interfaces, not re-invent them.
2016-07-05 12:12:44 -06:00
Gregory Nutt
3b825b3e00
Improve a debug assertion
2016-07-05 09:50:54 -06:00
Gregory Nutt
5b6fafb3f5
Several MTD FLASH drivers nullify the freed 'priv' structure and failed to return NULL as stated in the comments. Result, will operate on a NULL pointer later. Noted by David Sidrane.
2016-06-30 17:49:53 -06:00
Gregory Nutt
a897fd4ccf
Eliminate use of apps/system/usbmonitor. Use drivers/usbmonitor instead.
2016-06-30 13:09:22 -06:00
Gregory Nutt
7c34a77b54
Move apps/system/usbmonitor to nuttx/drivers/usbmonitor
2016-06-30 12:24:33 -06:00
Gregory Nutt
cbb36416ab
Need to use back- not forward-slash in character constant
2016-06-27 09:52:50 -06:00
Michael Spahlinger
3d5e690977
Shadow-Mode: The output- and configuration registers of the IO-Expander
...
are held in the microcontrollers memory and only written to the IO-Expander.
This reduces bus traffic and is more error-proof than the normal read-
modify-write operation.
Retry Mode: If enabled and an error occurs while writing to the IO-Expander the
current transmission is automatically repeated once.
2016-06-27 08:11:54 -06:00
Gregory Nutt
b16fdaf155
Some small improvements to GPIO driver
2016-06-26 11:24:35 -06:00
Gregory Nutt
db50f13511
Correct some typos in DEBUGASSERT statements
2016-06-24 14:34:21 -06:00
Gregory Nutt
20708c7c5e
GPIO driver: Fix inconsistency in naming; beef up a debug assertion.
2016-06-24 11:32:24 -06:00
Gregory Nutt
ae19ca45e0
drivrs/ioexpander: Add support for a very simple GPIO drivers. It supports only pre-conrigured input and output pins and only basic input and output operations.
2016-06-24 09:43:49 -06:00
Wolfgang Reissnegger
d27ebee070
[sam34][timer] Fix ops check in TCIOC_STOP.
2016-06-23 17:12:24 -07:00
Gregory Nutt
acf3b14fe2
Trivial typo fix in README and document
2016-06-22 16:17:57 -06:00
Gregory Nutt
31b8e52267
Update README and documentatino
2016-06-22 14:47:40 -06:00
Gregory Nutt
0cb137d021
SYSLOG device flush logic not meaningful if SYSLOG file channels not supported
2016-06-22 13:35:53 -06:00
Gregory Nutt
1774ff2ed9
Add SYSLOG documentation to the porting guide
2016-06-22 12:26:54 -06:00
Gregory Nutt
b3acebd292
Update/replace drivers/syslog/README.txt
2016-06-22 10:47:27 -06:00
Gregory Nutt
9c87749afc
SYSLOG device channel: Pre-pending CR to LF is now a configuration option
2016-06-22 10:08:20 -06:00
Gregory Nutt
91b82dcae3
SYSLOG character device channel will now expand LF to CR-LF
2016-06-22 08:36:50 -06:00
Gregory Nutt
82c890db23
syslog_dev_flush() needs to check if the inode is a mountpoint before calling the flush() method. Noted by David Sidrane.
2016-06-22 05:58:33 -06:00
Gregory Nutt
35cb2fb87d
Eliminate a warning
2016-06-21 16:59:46 -06:00
Gregory Nutt
cb55c06153
sched_file_channel(): Comments say that we need to lock the scheduler, but we do not.
2016-06-21 16:39:28 -06:00
Gregory Nutt
8a9bd9af9d
SYSLOG: Some rather complex conditional compilation missed a case.
2016-06-21 15:08:09 -06:00
Gregory Nutt
0e1e3bc404
Add a file that I forgot in the last commit; Also update some comments.
2016-06-21 13:33:17 -06:00
Gregory Nutt
e6a1d53869
Extend SYSLOG logic so that we can send SYSLOG output to a file. Not verified on initial commit.
2016-06-21 12:54:47 -06:00
Paul A. Patience
2f76f6e848
can: Add support for poll
2016-06-21 13:02:46 -04:00
David Sidrane
205a4b8498
Missing EXTERN on global variable declaration
2016-06-21 10:09:09 -06:00
Gregory Nutt
8f0c2cdd13
SYSLOG: Change configuration selections to assure that one and only one SYSLOG device can be selected. Also add a check to assure that it is appropriate to use up_putc as the low-level syslog device. Adds CONFIG_SYSLOG_CONSOLE and CONFIG_SYSLOG_SERIAL_CONSOLE.
2016-06-21 09:59:09 -06:00
Gregory Nutt
5118264e6c
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
2016-06-21 09:35:51 -06:00
Gregory Nutt
485aa6b231
SIM: Comment out skip scheduler debug output that can hang the simulation.
2016-06-21 08:59:01 -06:00
Gregory Nutt
c5ac473bc0
SYSLOG: Remove an obsolete, unused configuration item from Kconfig file
2016-06-21 07:58:42 -06:00
Gregory Nutt
62d8f839c7
SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup
2016-06-21 07:52:24 -06:00
Gregory Nutt
5385266756
SYSLOG: Fix a compile problem with assertions enabled.
2016-06-21 07:24:14 -06:00
Sebastien Lorquet
9a22ed1095
Trivial but required change to build SPI EEPPROM driver.
2016-06-21 06:29:26 -06:00
Gregory Nutt
29a99bef0f
serial/Kconfig: Oops put SERIAL_CONSOLE definition within if-endif condition. Better outside
2016-06-20 17:49:16 -06:00
Gregory Nutt
cf1375daf7
Break syslog_channel.c up into syslog_channel.c, syslog_putc.c, syslog_force.c and syslog_flush.c to limited what is brought into the link. Separate syslog_emergstream.c from syslog_stream.c. Didn't help in the case I was looking at.
2016-06-20 17:10:52 -06:00
Gregory Nutt
505ca542e8
Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly
2016-06-20 16:11:50 -06:00
Gregory Nutt
2a751068e6
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
2016-06-20 08:57:08 -06:00
Gregory Nutt
5002e27e84
Since syslog_add_intbuffer can now be called from the IDLE thread, it must use a critical section. Also fix an error in circular buffer index handling.
2016-06-20 07:50:07 -06:00
Gregory Nutt
f4c47636e7
SYSLOG: Debug output from the IDLE task should be forced like interrupt level output
2016-06-20 07:35:38 -06:00
Gregory Nutt
fa365e85f5
Update some cmoments
2016-06-20 06:11:22 -06:00
Stefan Kolb
a68232863e
Fix missing implementation of static function
2016-06-20 06:11:21 -06:00
Gregory Nutt
9a19d64610
Reanem syslogstream.c to syslog_steam.c for consistency
2016-06-19 18:19:34 -06:00
Gregory Nutt
7dd66a4620
Need to pass va_list as a reference to vsyslog. This is because va_list is a structure in some compilers and passing of structures in the NuttX sycalls does not work.
2016-06-19 14:50:00 -06:00
Gregory Nutt
690a0e7a6e
Eliminate another warning
2016-06-19 13:58:39 -06:00
Gregory Nutt
b68822805f
Eliminate a warning
2016-06-19 13:56:49 -06:00
Gregory Nutt
e480b385e6
SYSLOG: syslog_initialize.c appeared twice is list of sources
2016-06-19 13:55:23 -06:00
Gregory Nutt
5b2aa7bf99
Remove all traces of CONFIG_SYSLOG
2016-06-19 13:59:43 -06:00
Gregory Nutt
9434d3e945
There is now one-and-only-one copy of syslog_putc. It is in the SYSLOG channel logic and can redirect syslog output as needed. All former syslog_putc versions were renamed and the corresponding SYSLOG device initializaiton now calls syslog_channel()
2016-06-19 13:03:20 -06:00
Gregory Nutt
d82942cf3b
Merge remote-tracking branch 'origin/master' into syslog
2016-06-19 11:20:31 -06:00
Gregory Nutt
9f260ca193
Some renaming so that future features will fit in better; If the architecture provides its only system logging (via CONFIG_ARCH_SYSLOG), then syslog_initialize() is stubbed out
2016-06-19 11:16:12 -06:00
Gregory Nutt
19c6a82f8b
a few cosmetic changes
2016-06-19 09:52:34 -06:00
Gregory Nutt
a43cdbff0b
Add missing file header
2016-06-19 09:48:42 -06:00
Gregory Nutt
f59196247c
Merge remote-tracking branch 'origin/master' into syslog
2016-06-19 09:47:13 -06:00
Gregory Nutt
99ad3e9bcf
Need to capture return value from ramlog_syslog_initialize()
2016-06-19 09:41:35 -06:00
Gregory Nutt
0f18f3bd15
Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally
2016-06-19 09:39:21 -06:00
Gregory Nutt
de58cb6027
Some higher level SYSLOG features are disabled if the architecture-specific logic provides its own SYSLOG functionality
2016-06-19 09:21:52 -06:00
Gregory Nutt
3bd953316f
Add a hook before the existing syslog_initialize() call; rename the old syslog_initialize() to syslog_dev_initialize().
2016-06-19 09:12:33 -06:00
Gregory Nutt
12150bc6c1
Merge remote-tracking branch 'origin/master' into syslog
2016-06-19 08:48:10 -06:00
Gregory Nutt
e27491f5be
Move fs/drivers/fs_devsyslog.c to drivers/syslog/syslog_device.c
2016-06-19 08:46:46 -06:00
Gregory Nutt
668980b4fa
Merge remote-tracking branch 'origin/master' into syslog
2016-06-19 08:02:42 -06:00
Gregory Nutt
34f776dce9
Move the OS intensive part of vsyslog and vlowsyslog to drivers/syslog/vsyslog.c and vlowsyslog.c. Also move lib_syslogstrem to drivers/syslog/syslogstream.c
2016-06-19 07:56:24 -06:00
Gregory Nutt
fedf00033c
Make default interupt buffer smaller
2016-06-19 07:03:10 -06:00
Gregory Nutt
ea9565e137
SYSLOG: Flesh out interrupt buffer logic
2016-06-18 14:54:25 -06:00
Gregory Nutt
c44a011394
Add some basic SYSLOG channel selection logic
2016-06-18 12:54:55 -06:00
Gregory Nutt
3fa41c0f18
Kconfig files: Fix some dependencies that have CONFIG_ in the variable name
2016-06-17 19:30:19 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
b7f0fbc073
Centralize definitions associated with CONFIG_DEBUG_RTC
2016-06-16 07:39:23 -06:00
