Summary:
- I noticed that recent mm_heap changes causes a crash with
stm32f4discovery:kostest
- This is a tentative solution to avoid the crash
Impact:
- None
Testing:
- Tested with stm32f4discovery board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The original code hard-coded card detection to the low when card is
inserted and high when not. This might not be true on every board
because it depends on the slot and wiring used. The second reason is
because it is also possible to detect card with D3 pin pull-up when the
slot does not provide dedicated card detection switch.
This introduces new argument to the sam_hsmci_initialize to allow
invert of card detection pin. It also applies this invert to existing
boards as that was the state up to this point.
This commit adds configuration file with enabled MCAN support. This is
mainly to track changes in architectural driver that could cause build
errors.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit updates configuration pikron-bb (configuration for open
hardware experimental board) to support permanent magnet sychnronous
motor control. This includes setup of PWM, GPIO and ADC peripherals.
Required follow up changes are done to pinout definition.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
- Fix knsh/defconfig to work with pyOCD
- Fix kernel-space.ld to boot
- Fix memory.ld for CONFIG_BUILD_PROTECTED=y
Impact:
- CONFIB_BUILD_PROTECTED=y only
Testing:
- Tested with imxrt1060-evk
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
First decoupling changes related to CMAKE
BINDIR/APPSBINDIR:
Output path of Kconfig which dynamically generated by NuttX Kernel/Apps
This option is consistent with the TOPDIR/APPSDIR by default, and will
be changed when out-of-tree compilation is supported
Signed-off-by: chao an <anchao@xiaomi.com>
There is currently a big problem in the address environment handling which
is that the address environment is released too soon when the process is
exiting. The current MMU mappings will always be the exiting process's, which means
the system needs them AT LEAST until the next context switch happens. If
the next thread is a kernel thread, the address environment is needed for
longer.
Kernel threads "lend" the address environment of the previous user process.
This is beneficial in two ways:
- The kernel processes do not need an allocated address environment
- When a context switch happens from user -> kernel or kernel -> kernel,
the TLB does not need to be flushed. This must be done only when
changing to a different user address environment.
Another issue is when a new process is created; the address environment
of the new process must be temporarily instantiated by up_addrenv_select().
However, the system scheduler does not know that the process has a different
address environment to its own and when / if a context restore happens, the
wrong MMU page directory is restored and the process will either crash or
do something horribly wrong.
The following changes are needed to fix the issues:
- Add mm_curr which is the current address environment of the process
- Add a reference counter to safeguard the address environment
- Whenever an address environment is mapped to MMU, its reference counter
is incremented
- Whenever and address environment is unmapped from MMU, its reference
counter is decremented, and tested. If no more references -> drop the
address environment and release the memory as well
- To limit the context switch delay, the address environment is freed in
a separate low priority clean-up thread (LPWORK)
- When a process temporarily instantiates another process's address
environment, the scheduler will now know of this and will restore the
correct mappings to MMU
Why is this not causing more noticeable issues ? The problem only happens
under the aforementioned special conditions, and if a context switch or
IRQ occurs during this time.
The cyw43-driver is a submodule in the pick-sdk, if the submodule is
not updated, the dummy firmware driver will be used, update the document
to correct the setup flow.
${PICO_SDK_PATH}/lib/cyw43-driver/firmware/43439A0-7.95.49.00.combined
Signed-off-by: chao an <anchao@xiaomi.com>
