Xiang Xiao
149748e4ed
drivers/net: drivers/net: Add support for Microchip LAN91C111 driver
2018-08-24 11:07:07 -06:00
Alan Carvalho de Assis
283b73edc5
Fix lots of typos in C comments and Kconfig help text
2018-07-08 18:24:45 -06:00
Masayuki Ishikawa
324008c1e5
drivers/net: Add support for telnet character mode
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-09 20:19:26 +09:00
Gregory Nutt
7deb24484c
This comment converts the underlying IPC used by the UserFS from Unix domain local sockets to UDP LocalHost loopback sockets. The problem with the local sockets is that they do require operations on the top level psuedo-file system inode tree. That tree must be locked during certain traversals such as enumerate mountpoints or enumerating directory entries.
...
This conversion is unfortunate in the sense that Unix local domain sockets are relatively lightweight. LocalHost UDP sockets are much heavier weight since they rely on the full UDP stack. If anyone is up for a complete redesign, then using some shared memory and a POSIX message queue would be lightweight again.
This commit also fixes several bugs that were not testable before the inode tree deadlock. I cannot say that the logic is 100% stable but it does not have basic functionality.
Squashed commit of the following:
fs/userfs: Order locking so that access to the shared I/O buffer is also locked.
fs/userfs: Converts to use LocalHost UDP loopback for IPC.
2017-11-05 12:25:58 -06:00
Gregory Nutt
cfc5f8fbaf
drivers/net: Remove the old, unfinished Crystal LAN driver. I don't even have the hardware that it goes with anymore.
2017-10-28 10:27:00 -06:00
Gregory Nutt
3b67c06711
net/Kconfig: Remove to improper use of comma in syntax
2017-10-06 15:14:09 -06:00
Gregory Nutt
969d7c5814
Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering.
2017-08-21 06:28:59 -06:00
Gregory Nutt
bd7c84b23e
Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 14:24:12 -06:00
Maciej Wójcik
4a8aa6ae95
typos
2017-03-01 12:56:15 +01:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Gregory Nutt
936b55f608
drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers.
2016-11-18 09:22:49 -06:00
Gregory Nutt
52560bba37
ENC28J60: Allow either HP or LP work queue to be used.
2016-11-18 08:41:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Gregory Nutt
057b6aef2c
drivers/net: Move the Telnet driver from apps/netutils/netnetd to drivers/net
2015-12-07 09:26:57 -06:00
Gregory Nutt
2a93c66948
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:08:09 -06:00
Gregory Nutt
3c5f817513
Networking: Local loopback is basically functional and is no longer EXPERIMENTAL
2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978
Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL
2015-08-24 11:29:54 -06:00
Gregory Nutt
ccb24e1766
drivers/net: Add a basic prototype for a local loopback device
2015-08-24 11:03:36 -06:00
Gregory Nutt
ea2fafb024
Add definitions to support a local loopback link layer
2015-08-24 08:25:08 -06:00
Gregory Nutt
0dd273935a
Standardize naming of all SLIP configuration options
2015-08-06 15:08:15 -06:00
Gregory Nutt
86769101a1
SLIP: Review code, update comments, add missing configuration items
2015-08-06 14:32:12 -06:00
Anton D. Kachalov
88861e562a
Add support for a Faraday FTMAC100 Ethernet MAC Driver. From Anton D. Kachalov
2015-07-29 15:57:58 -06:00
Gregory Nutt
5a7b2757aa
Add definitions for SMSC LAN8742A PHY
2015-07-19 13:09:48 -06:00
Gregory Nutt
cb5a3bd84d
Fix error in Kconfig of previous change: Can't mix tabs and spaces in help text
2015-07-17 08:31:21 -06:00
Gregory Nutt
652371c919
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
391367e8ca
LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY.
2015-06-03 17:34:36 -06:00
Gregory Nutt
312ae5713e
PIC32MZ Ethernet: Add support for LAN8740A PHY
2015-03-29 07:05:30 -06:00
Gregory Nutt
469827640b
Add support for LAN8740
2015-03-23 15:34:10 -06:00
Gregory Nutt
32aadd9cc2
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
2015-03-16 13:51:37 -06:00
Gregory Nutt
7cc93b708a
SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts
2014-08-17 14:07:53 -06:00
Gregory Nutt
c52f634b79
Standardize a PHY interrupt attachment interface
2014-08-16 08:34:36 -06:00
Gregory Nutt
8b450d6d1b
SAMA5D4: Add EMAC driver
2014-06-11 12:23:31 -06:00
Gregory Nutt
4bbbe80a31
configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools
2014-03-06 11:47:16 -06:00
Gregory Nutt
29a4ca8f08
configs/rgmp/arm/default: Configuration converted to use the kconfig-frontends tools
2014-03-06 11:19:05 -06:00
Gregory Nutt
a2a3f80120
configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools
2014-03-05 12:16:02 -06:00
Gregory Nutt
2c1b3188e7
onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools
2014-03-03 11:40:29 -06:00
Gregory Nutt
edf984df2d
ENCX24J600: Improved descriptor handling, free packets on rx abort interrupt. From Max Holtzberg
2013-10-11 10:57:58 -06:00
Gregory Nutt
e4af9572d0
Beginng of support for GMII/RGMII PHYs
2013-09-26 15:55:21 -06:00
Gregory Nutt
22fe508443
Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled
2013-09-25 11:50:05 -06:00
Gregory Nutt
368867f06e
ENCx24J600 UDP backlog support from Maz Holtzberg
2013-09-24 09:03:16 -06:00
Gregory Nutt
72340b85fe
Add support for multiple PHY selections for multiple Ethernet MAC drivers
2013-09-17 10:52:23 -06:00
Gregory Nutt
70be601ea2
Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg
2013-08-25 11:21:54 -06:00
patacongo
c4b2ce70ba
Fix ENC28J60 Tx transmit (still a receive problem); Add HTTP 408 logic from Kate
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5158 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 23:02:58 +00:00
patacongo
7a2692df6a
Resync new repository with old repo r5166
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 18:35:37 +00:00
