Adds a driver for an FPGA fabric / CoreSPI implementation.
Supports multiple instances, assuming they reside in some base address,
offsettable by a constant value.
External function to query vbus status. Reading from the block requires
the clock, but if no devices are open -> vbus detect does not work.
This creates a chicken / egg problem, if vbus detect is used to start
the usb device.
bmp388 works poorly as the system fires STOPs even in
a beginning of a transaction. Don't let unrelated STOPs
to distort the data flow.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This adds 2 more FPGA I2Cs. Also rework the indexing
so that it matches the earlier work without major changes.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This fixes the following issue:
- After sending the address, the driver writes an extra zero
Without this patch, the extra write causes an extra ACK that would
terminate the sequence prematurely. This is observed as data read
corruption.
With this fix, the condition is detected precisely. That being the
case, the sequence is continued with a repeated start, after which
the read continues normally.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This incorporates an fpga i2c driver into the existing i2c driver.
This fpga i2c works almost 100% as the MSS i2c, but the difference
is that the fpga driver terminates all transactions with a stop
sent -interrupt. That needs to be handled.
Fpga clock source is also different, act accordingly.
SEC2TICK(10) is an overkill to any app, use just one second instead.
modifyreg32s are simplified as well, no need to clear and set
as set is enough.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
I2C status register reset value (0xf8) was not handled properly causing unnecessary bus resets.
Added critical section to mpfs_i2c_reset() and removed unnecessary interrupt disabling elsewhere.
to avoid the infinite recusive dispatch:
*0 myhandler (signo=27, info=0xf3e38b9c, context=0x0) at ltp/testcases/open_posix_testsuite/conformance/interfaces/sigqueue/7-1.c:39
*1 0x58f1c39e in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:167
*2 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*3 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:115
*4 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:435
*5 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*6 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*7 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*8 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:115
*9 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:435
*10 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*11 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*12 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*13 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:115
*14 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:435
*15 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*16 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*17 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*18 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:115
*19 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:435
*20 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*21 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*22 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*23 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:115
*24 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:435
*25 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*26 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*27 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*28 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:115
*29 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:435
*30 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*31 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Move the mapping functionality from up_shmat/shmdt into two generic
mapping functions. This makes it possible to do other mappings besides
user shared memory area mappings.
During the serial reconfiguration from bootloader to the
NuttX a trash character "?" (Unicode replacement U+FFFD)
was printed in the screen.
This fix was discovered by Sylvio Alves from Espressif!
Instead of using Espressif's emulated NVS to save Wi-Fi data, use
`wapi`s wireless configure initialization mechanism for saving
Wi-Fi data. It 1) avoids creating a specific storage partition
just to save Wi-Fi data (ESP32-C3's storage partition is used
instead); 2) avoids initialization problems of the emulated NVS
when SMP is enabled (the Wi-Fi driver tries to initialize it before
the actual partition is initialized); and 3) enables reconnecting
using `wapi reconnect` command and connect the device automatically
on bringup if `CONFIG_NETUTILS_NETINIT` is selected.
- putreg32() is used the wrong way around (reg, val) instead of (val, reg)
- MPFS_SPI_FRAMESIZE is not a register, FSIZE is the name
- Clear all interrupts _before_ writing the FIFO, this prevents a race
condition where a short transmission completes before the interrupt is
enabled.
in SMP, signal processing cannot be nested, we use xcp.sigdeliver to identify whether there is currently a signal being processed, but this state does not match the actual situation
One possible scenario is that signal processing has already been completed, but an interrupt occurs, resulting in xcp.sigdeliver not being correctly set to NULL,
At this point, a new signal arrives, which can only be placed in the queue and cannot be processed immediately
Our solution is that signal processing and signal complete status are set in the same critical section, which can ensure status synchronization
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1. Get the value of sp from dump regs when an exception occurs,
to avoid getting the value of fp from up_getsp and causing
incomplete stack printing.
2. Determine which stack the value belongs to based on the value
of SP to avoid false reports of stack overflow
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
CURRENT_REGS may change during assert handling, so pass
in the 'regs' parameter at the entry point of _assert.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
minidump will backtrace failure when use C code to save user context,
because the stack push operation in C code can disrupt the stack information.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
- Fix DMA addressing issues within litex_sendsetup/litex_recvsetup
- Extend with handling specific to eMMC commands during init & use.
- Cleanup of 4-bit BUS handling for SD and eMMC
- For eMMC, Send CMD0 during init as per JEDEC v4.41 for pre-idle
Store the old environment in a local context so another temporary address
environment can be selected. This can happen especially when a process
is being loaded (the new process's mappings are temporarily instantiated)
and and interrupt occurs.
- Remove the temporary "saved" variable when temporarily changing MMU
mappings to access another process's memory. The fact that it has an
address environment is enough to make the choice
- Restore nxflat_addrenv_restore-macro. It was accidentally lost when
the address environment handling was re-factored.
Summary:
- Support arm64 pmu api, Currently only the cycle counter function is supported.
- Using ARM64 PMU hardware capability to implement perf interface, modify all
perf interface related code.
- Support for pmu init under smp.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Summary:
- I noticed that 'sleep 1' on nsh took 10 seconds on QEMU-6.1,
though the old version (e.g. QEMU-5.2) works correctly.
- I think we should implement PLL for the QEMU environment.
However, this fix works as a tentative solution.
Impact:
- K210 on QEMU only
Tested
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
RISCV has a modular instruction set. It's hard to define cpu-model to support all toolchain.
For Zig, cpu model is this formal: generic_rv[32|64][i][m][a][f][d][c]
For Rust, cpu model is this formal: riscv[32|64][i][m][a][f][d][c]
So, it's better to map the NuttX config to LLVM builtin cpu model, these models supported by
all LLVM based toolchain.
Refer to : https://github.com/llvm/llvm-project/blob/release/15.x/llvm/lib/Target/RISCV/RISCV.td
These models can't cover all implementation of RISCV, but it's enough for most cases.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
