Squashed commit of the following:
drivers/bluetooth: Re-architect Bluetooth UART driver to follow upper/lower half model. Completely untested.
drivers/bluetooth: Grr.. Another band-aid commit to stay in sync with master. Why is this so difficult
drivers/bluetooth: Band-aid commit to stay in sync with master. Lost it somehow.
drivers/wireless/bluetooth: A few changes, mostly thought experiments.
drivers/wireless/bluetooth: UART-based Bluetooth driver ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. This initial commit is the original files in the NuttX build environment with changes to conform with the coding standard. It should not even build.
NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver.
Squashed commit of the following:
wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings.
wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors.
wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16().
wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve.
Kconfig edited online with Bitbucket
wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is.
wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace.
wireless/bluetooth: Add message queue support to manage interthread buffer transfers.
wireless/bluetooth: Replace fibers with kernel threads.
wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg.
wireless/bluetooth: Complete leveage of the bluetooth stack including public header files.
wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation.
wireless/bluetooth: Fix some naming of static global variables.
wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files).
wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
mac802154: Adds ackreq flag to TX descriptor for use by radio driver.
The radio layer is responsible for a full "transaction". Because of
differences in radio capabilites, the radio must be responsible for
the handling of acks and retransmissions. This commit simply passes
the ackreq meta-data flag along to the radio.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
fs/cromfs: Now depends on EXPERIMENTAL because it is not yet verified.
fs/cromfs: This commit brings the CROMFS file system to code complete. Still completely untested. Next steps: Need a tool to generate CROMFS file system images and a test case under apps/
fs/cromfs: Add logic to traverse the in-memory file system nodes.
fs/cromfs: Add initial support for an in-memory, compressed, read-only file system.
net/tcp: Add logic to send probes when SO_KEEPALIVE is enabled.
net/tcp: TCP socket should not have to be connected to configure KeepAlive.
net/: Add a separate configuration to enable/disable KEEPALIVE socket options.
net/tcp: Arguments to TCP keep-alive timing functions probably should be struct timeval as are the times for other time-related socket options.
net/tcp: Fix a backward conditional
net/tcp: Add some more checks and debug output to TCP-protocol socket options.
net/tcp: Cosmetic changes to some alignment.
net/: Adds socket options needed to manage TCP-keepalive and TCP state machine logic to detect if that the remote peer is alive. Still missing the timer poll logic to send the keep-alive probes and the state machine logic to respond to probes.
drivers/lcd/ft80x: ACTIVE host command appears to be formatted differently than other host commands; Fix ROM CHIPID. Appears to be big-ending, BCD.
drivers/lcd/ft80x: Fix some compile issues when debug features are enabled.
Feature pca9540bdp i2cmultiplexer
* Implement common i2c multiplexer abstraction to be reused by i2c multiplexer devices. Provide common interface with transfer and reset calls to set up virtual i2c busses.
* Remove i2cmux_lower_half.c and headers, will be implemented by each mux driver
* Implement PCA9540BDP I2C multiplexer lower half which uses the common i2c mux abstraction
* Remove application interface and implement common i2c functions
* Remove application interface from pca driver and implement common i2c functions directly in the pca driver
* Use i2cerr
Approved-by: Gregory Nutt <gnutt@nuttx.org>
cc1101: Changes from review of last PR.
remove gpio
remove cc1101 frame len
remove FLAGS_RXONLY flags
add cc1101 function
remove some waring
add cc1101 poll function
add cc1101 register
add cc1101 isr read data
add cc1101 spi deviceId
add cc1101 init2
add wait cc1101 chip ready
raw init cc1101
drivers/lcd and include/nuttx/lcd: Add FT80x support for writing to graphics memory. Also add some definitions needed by apps/examples/ft80x for bitmap manipulation.
drivers/lcd: Review/update FT80x initializatin logic
drivers/lcd: Rename ft80x_base.c to just ft80x.c. Add logic to notify FT80X clients of events via signals.
drivers/lcd: Trivial updates to naming. Add some new definitions.
