Alan Carvalho de Assis
c4cf5be231
Add support to Maxim MAX31855 Thermocouple-to-Digital
2015-09-13 15:56:48 -06:00
Pierre-noel Bouteville
8651e0f2ca
CC3300: Add const to pointers in arguments to wlan_connect; remove an unused function prototype
2015-09-09 16:34:37 -06:00
Gregory Nutt
8a87e3ca6e
Add an empty function that can serve as a placeholder for the network shutdown() function
2015-09-09 07:03:05 -06:00
Sebastien Lorquet
77e4e7b231
Change all references from avsprintf to vasprintf. From Sebastien Lorquet
2015-09-07 13:22:13 -06:00
Paul A. Patience
c080146748
SSD1351 driver: add 8-bit parallel interface
2015-09-06 13:28:28 -04:00
Gregory Nutt
7d33e858dd
QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory
2015-09-06 09:37:34 -06:00
Gregory Nutt
9c66bde5b0
Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1
2015-09-05 09:10:48 -06:00
Paul A. Patience
3b89eabd50
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
2015-09-01 13:52:29 -04:00
Gregory Nutt
2d84270552
ST25FL1: Correct some compile problems when file system debug is enabled
2015-08-31 09:25:14 -06:00
Gregory Nutt
d6b0a8fe72
ST25FL1 driver is code complete
2015-08-29 15:58:54 -06:00
Gregory Nutt
bfc3c98e12
Move MTD ioctls commands from include/nuttx/fs/fs.h to include/nuttx/mtd/mtd.h. Add commands to protect and unprotect memory
2015-08-29 10:54:38 -06:00
Gregory Nutt
883c6a7cea
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-29 08:02:57 -06:00
Gregory Nutt
8c001f6807
Merged in paulpatience/nuttx (pull request #21 )
...
Add SSD1351 OLED controller support
2015-08-28 17:01:24 -06:00
Paul A. Patience
01b68e90d0
Add SSD1351 OLED controller support
2015-08-28 18:37:01 -04:00
Gregory Nutt
e392471dc2
QSPI interface: Add support for dual and quad read transfers; Add support for dummy read cycles.
2015-08-28 12:00:06 -06:00
Gregory Nutt
70bdf682af
QSPI: Add support for data vs command transfer
2015-08-28 10:15:08 -06:00
Gregory Nutt
361e35a7be
QSPI: Make changes to interface to better work with the SAMV71
2015-08-27 14:16:51 -06:00
Gregory Nutt
e6be3cea9f
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-26 10:44:35 -06:00
Gregory Nutt
7a168a791f
Networking: Fix loopback device MTU
2015-08-26 10:33:44 -06:00
Gregory Nutt
6dadfcbf6b
Add QSPI interface definition
2015-08-25 15:26:16 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978
Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL
2015-08-24 11:29:54 -06:00
Gregory Nutt
07bdff9ef7
Networking: Add NetDB support for the local loopback device
2015-08-24 10:08:26 -06:00
Gregory Nutt
e21501c699
Merge remote-tracking branch 'origin/master' into localhost
2015-08-24 08:29:36 -06:00
Gregory Nutt
569ff602ea
Networking: Remove bogus references to PPP as a link layer protocol
2015-08-24 08:29:07 -06:00
Gregory Nutt
ea2fafb024
Add definitions to support a local loopback link layer
2015-08-24 08:25:08 -06:00
Gregory Nutt
6fc449f689
Moving canned_symtab from nuttx/libc to apps/system
2015-08-23 11:33:29 -06:00
Alan Carvalho de Assis
9b036311c0
Missing comma in spi.h header file
2015-08-23 11:06:32 -06:00
Gregory Nutt
f12692b78f
Extend canned symbol table logic to work in protected build mode
2015-08-23 10:44:04 -06:00
Pavel Pisa
81a257eeb0
Optional canned symtab inclusion to the build. When option CONFIG_LIBC_SYMTAB is selected and symbol table file libc/symtab/canned_symtab.inc is prepared then application can use system provided complete symbol table. The option has substantial effect on system image size. Mainly code/text. If loading of applications at runtime is not planned do not select this. From Pavel Pisa.
2015-08-23 08:38:58 -06:00
Max Neklyudov
622c5c9aa6
Another TUN driver fix from Max Neklyudov
2015-08-21 07:40:13 -06:00
Gregory Nutt
02306044b2
boardctl.h: Extended boardctl() commands with BOARDIOC_CAN_INITIALIZE
2015-08-18 13:23:34 -06:00
Gregory Nutt
28853e5932
CAN: Define IOCTL commands to get and set the bit timing values
2015-08-18 11:21:01 -06:00
Gregory Nutt
505d5f8103
CAN: Add error bit values
2015-08-18 08:48:39 -06:00
Gregory Nutt
a987379e64
Add an error bit to the CAN message report
2015-08-18 07:27:00 -06:00
Gregory Nutt
95634a3b34
CAN IOCTLs: Should support standard CAN filtering in extended ID mode
2015-08-17 10:53:49 -06:00
Max Neklyudov
425146255a
Network drivers: Fix bug in tun interface driver. From Max Neklyudov
2015-08-17 09:04:58 -06:00
Gregory Nutt
51f386d08a
Fix more common typos
2015-08-16 11:07:23 -06:00
Gregory Nutt
1c41236fa1
Merged in paulpatience/nuttx (pull request #18 )
...
Added support for other MS58XX altimeters.
2015-08-14 18:09:14 -06:00
Paul A. Patience
3303ef8c85
Added support for other MS58XX altimeters.
2015-08-14 20:04:16 -04:00
Gregory Nutt
8f7453b5ec
Addings to stdlib.h must be added to cstdlib too
2015-08-14 12:04:57 -06:00
Gregory Nutt
768d892188
Add si_errno to siginfo_t
2015-08-14 10:10:32 -06:00
Gregory Nutt
6df94096ca
Add ldiv() and lldiv() too
2015-08-14 08:45:59 -06:00
Stavros Polymenis
301f215638
Add support for div() to the C library. From OrbitalFox
2015-08-14 08:35:01 -06:00
Paul A. Patience
c4b888b41d
Added MS5805 altimeter.
2015-08-11 22:50:11 -04:00
Gregory Nutt
8aeea88f43
Merged in paulpatience/nuttx (pull request #16 )
...
Added MB7040 sonar.
2015-08-11 12:26:57 -06:00
Paul A. Patience
a634ad5528
Added MB7040 sonar.
2015-08-11 13:26:56 -04:00
Gregory Nutt
7791b2a62e
Refresh submodules + Update comments in SPI slave header file
2015-08-11 08:34:16 -06:00
Gregory Nutt
e0238df359
SPI Slave: Summarize DMA issues in SPI slave header file
2015-08-11 08:34:15 -06:00
Paul A. Patience
65792c5dbc
Added forward declarations of structures to fix header inclusion
...
order bugs.
Removed an unused variable.
Added debug asserts to check for invalid I2C addresses.
2015-08-10 16:18:37 -04:00
Paul A. Patience
c0964a17b4
Fixed a forgotten FAR, a typo, and an incorrect bit-field definition.
2015-08-10 14:45:40 -04:00
Gregory Nutt
9f1d7cddd8
Merged in paulpatience/nuttx (pull request #14 )
...
Converted the AS5048B to use the quadrature encoder interface, changed copyright notice to my boss's preference, and updated ChangeLog to use my full name
2015-08-10 12:22:30 -06:00
Paul A. Patience
877d5f3b09
Changed copyright notices to my boss's preference.
2015-08-10 14:15:07 -04:00
Paul A. Patience
1d0e25af30
Convert the AS5048B to use the quadrature encoder interface.
2015-08-10 13:41:39 -04:00
Gregory Nutt
c74dc5f83f
Changes from review epoll() implementation for consistency with NuttX naming and coding style
2015-08-10 10:38:41 -06:00
Gregory Nutt
2c79094af9
Merged in rnouse/nuttx (pull request #13 )
...
Add simple `epoll' wrapper around `poll'
2015-08-10 10:13:56 -06:00
Gregory Nutt
d61e49b7cd
Fix typo, include comments in the SPI slave interface header file
2015-08-10 10:05:56 -06:00
Anton D. Kachalov
8d26ad86b1
Merge branch 'master' of https://bitbucket.org/patacongo/nuttx
2015-08-10 18:16:09 +03:00
Anton D. Kachalov
fd07043180
Add simple epoll' wrapper around poll'
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-10 18:15:24 +03:00
Gregory Nutt
21d4f00e65
Add the prototype for up_spi_slave_initialize() to the SPI slave interface header file
2015-08-09 17:42:47 -06:00
Gregory Nutt
17fab9dbd5
Updated comments in header file
2015-08-09 17:22:27 -06:00
Gregory Nutt
1df8ff1de8
SPI Slave Interface: Clean up/simplify some naming
2015-08-09 16:22:19 -06:00
Gregory Nutt
f570a9b770
Add output queuing to SPI slave interface
2015-08-09 15:42:57 -06:00
Gregory Nutt
5848101c1f
Fix/improve some issues in the SPI slave interface header file
2015-08-09 12:06:46 -06:00
Gregory Nutt
7317f3bd88
Refresh modules; trival change to comments in header file
2015-08-09 09:49:49 -06:00
Gregory Nutt
0db86bc509
SPI Slave: Another big simplication to the interfqace design
2015-08-08 16:16:53 -06:00
Gregory Nutt
f604c813ff
SPI Slave: Add an unbind() method to the slave interface
2015-08-08 12:18:05 -06:00
Gregory Nutt
0ce50caa06
Forgot to add the main SPI slave interface header file in the last commit
2015-08-08 10:46:13 -06:00
Gregory Nutt
b6d6776d02
Add a preliminary definition for an SPI slave interface
2015-08-08 10:45:15 -06:00
Gregory Nutt
e9bbc57831
Merged in paulpatience/nuttx (pull request #12 )
...
Added AS5048B magnetic rotary encoder.
2015-08-07 15:33:48 -06:00
Paul A. Patience
b7e0fc34c5
Added AS5048B magnetic rotary encoder.
2015-08-07 17:22:01 -04:00
Gregory Nutt
f7b64b1bfc
can.h: Mostly cosmetic cleanup
2015-08-07 09:02:12 -06:00
Gregory Nutt
2591b2b198
CAN: Extend new filter IOCTLs to support message prioritization and additional filter modes
2015-08-07 08:24:12 -06:00
Gregory Nutt
41a09a6d64
Merged in paulpatience/nuttx (pull request #11 )
...
Added LM92 temperature sensor.
2015-08-06 16:26:26 -06:00
Paul A. Patience
282c4f5347
Added LM92 temperature sensor.
2015-08-06 17:35:34 -04:00
Gregory Nutt
0dd273935a
Standardize naming of all SLIP configuration options
2015-08-06 15:08:15 -06:00
Gregory Nutt
86769101a1
SLIP: Review code, update comments, add missing configuration items
2015-08-06 14:32:12 -06:00
Gregory Nutt
e1c902d468
Remove some incorrect comments
2015-08-06 14:06:43 -06:00
Gregory Nutt
f4d9c3e33d
CAN extended IDs are 29, not 28 bits
2015-08-06 11:51:13 -06:00
Gregory Nutt
007e258c2b
Update some function headers
2015-08-05 16:22:40 -06:00
Gregory Nutt
36d4559ee8
CAN: Define IOCTL commands that manage filters
2015-08-05 13:00:31 -06:00
Gregory Nutt
e3decca82c
Cosmetic update to some comments
2015-08-05 08:07:58 -06:00
Gregory Nutt
9cbac41e78
Clean-up/standardize a few header files
2015-08-03 11:01:41 -06:00
Gregory Nutt
991adde6ae
Add definition of SCHED_MAX_REPL
2015-08-03 10:46:36 -06:00
Gregory Nutt
679ae385aa
Merged in rnouse/nuttx (pull request #9 )
...
Custom IOCTL support and more shadow warnings fixup
2015-08-03 06:46:43 -06:00
Anton D. Kachalov
23252f671f
Add Moxa IOCTLs to select port mode
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-03 15:33:46 +03:00
Anton D. Kachalov
1bb74504a8
Add support for custom platform IOCTL on UART
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-03 15:32:51 +03:00
Gregory Nutt
08d83cfae3
Merged in rnouse/nuttx (pull request #8 )
...
UART 16550: putc logic fixup
2015-08-03 06:32:17 -06:00
Anton D. Kachalov
2fa6237b49
Revert THRNE-patch. The problem was in u16550_putc
...
Regarding to:
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1584
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1913
When UART_LSR_THRE bit is set, then we ready to transmit more.
Current u16550_putc loops while UART_LSR_THRE bit is set. This logic have to be inverted.
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-03 13:19:55 +03:00
Gregory Nutt
ffec6124f2
Add a start time to sem_tickwait() to account for any elapsed time before the timer is actually started
2015-08-01 14:57:31 -06:00
Gregory Nutt
2c66e0eb2a
sem_tickwait(): Add a new, non-standard function to perform timed semaphore waits. It is functionally equialent to the standard sem_timedwait(), but more efficient for use in higher performance device drivers. Requested by Max Neklyudov
2015-08-01 07:31:09 -06:00
Gregory Nutt
8935ff34d5
16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov
2015-07-29 16:31:21 -06:00
Anton D. Kachalov
88861e562a
Add support for a Faraday FTMAC100 Ethernet MAC Driver. From Anton D. Kachalov
2015-07-29 15:57:58 -06:00
Gregory Nutt
a6ccb7f308
Sporadic scheduler: Third design. Now it looks closer to what I want
2015-07-28 14:26:31 -06:00
Gregory Nutt
95ca3a1d1e
Fixes several more sporadic scheduler bugs
2015-07-27 18:08:21 -06:00
Gregory Nutt
a7322f5a6d
Sporadic scheduler: Fix how suspension time is calculated
2015-07-27 15:54:19 -06:00
Gregory Nutt
e33c727520
Sporadic scheduler: Move pending time into each timer instance
2015-07-27 14:48:21 -06:00
Gregory Nutt
e66e2f5c0f
Use the last budgeted time from the last timer started
2015-07-27 13:13:30 -06:00
Gregory Nutt
8c754ccd4f
Sporadic scheduler: misc bug fixes
2015-07-27 11:55:52 -06:00
Gregory Nutt
cc1c7731da
Sporadic scheduler: Fix budget computations when replenishment intervals are nested
2015-07-27 09:35:52 -06:00
Gregory Nutt
484f148001
Sporadic scheduler: Add instrumentation hooks to support GPIO outputs
2015-07-27 08:37:25 -06:00
Gregory Nutt
99664b7811
Sporadic scheduler: Add logic to collection the partial timer expiration when a sporadic thread is suspended in tickless mode
2015-07-26 15:03:47 -06:00
Gregory Nutt
3e88b77540
Sporadic scheduler: Handle a case when the scheduler is resumed before it has even had a chance to run
2015-07-26 08:08:45 -06:00
Gregory Nutt
27e21710fd
This is basically a complete redesign of the sporadic scheduling logic due to limitations in the initial design
2015-07-25 12:50:53 -06:00
Gregory Nutt
a1031417e8
Comment out part of sporadic scheduler logic: Part of replenishment logic is bogus
2015-07-24 18:18:58 -06:00
Gregory Nutt
4490744def
Add logic to reset the replenish the sporadic scheduler when a task is resumed
2015-07-24 09:55:02 -06:00
Gregory Nutt
ea7dbc984b
Add basic sporadic schedule state machine
2015-07-24 09:03:21 -06:00
Gregory Nutt
f6c102d4c0
A few cosmetic fixes from the last commit
2015-07-23 13:26:41 -06:00
Gregory Nutt
9095e8eab4
include/, sched/, and libc/: Add support for sporadic scheduling parameters in struct sched_param, posix_spawnattr_t, and pthread_attr_t. Update all user interfaces to pass sporadic scheduling parameters. Feature is dependent on EXPERIMENTAL and no changes have yet been made to core scheduling logic.
2015-07-23 13:16:32 -06:00
Gregory Nutt
2b3aae0ddc
Add basic configuration options for SCHED_SPORADIC
2015-07-23 10:33:30 -06:00
Gregory Nutt
146bdc3c93
TCB: Increase the size of the scheduling policy field from 1 to 2 bits to allow additional, planned scheduling policies
2015-07-23 10:15:07 -06:00
Gregory Nutt
2a7416238a
Syscall fixes: Add support for Cortex-M7; mount syscall has to be suppressed if there are no mountable file systems
2015-07-21 11:20:46 -06:00
Alan Carvalho de Assis
a01b2e5bbc
drvers/sensor and include/nuttx/sensors: Add support to Bosch BMP180 barometer. From Alan Carvalho de Assis.
2015-07-20 07:18:27 -06:00
Gregory Nutt
5a7b2757aa
Add definitions for SMSC LAN8742A PHY
2015-07-19 13:09:48 -06:00
Gregory Nutt
f41df38b0b
More CAN driver fixes: remove and unused semaphore. Looks to me that waiter counts are not being initialized
2015-07-15 19:27:36 -06:00
Gregory Nutt
621fef2c31
Some trivial clean up associated with the last commit
2015-07-15 18:43:53 -06:00
Gregory Nutt
320c584888
CAN driver: Fix a problem where the rx_sem count can grow without bounds
2015-07-15 18:20:08 -06:00
Alan Carvalho de Assis
a3e24a0b6c
Modify the SSD1306 LCD driver to support either the SPI or I2C interface. From Alan Carvalho de Assis,
2015-07-15 11:21:54 -06:00
Gregory Nutt
83f26091f4
Implement anti-aliasing in the NuttX graphics line drawing
2015-07-14 10:17:42 -06:00
Gregory Nutt
4bcd13eabd
Add RGB blending logic needed to support anti-aliasing
2015-07-14 07:57:54 -06:00
Gregory Nutt
fcaac468b1
NETDB: Make sure that we have a valid DNS server address before attempting DNS queuries; Provide an optional default DNS server address in the configuration
2015-07-13 08:19:31 -06:00
Gregory Nutt
9a6cf5724e
DNS: Finish off low-level DNS IPv6 request processing. Untested on initial commit
2015-07-12 16:23:08 -06:00
Gregory Nutt
835878b003
This completes all interface level support for IPv6 DNS. Still some missing logic at the lowest protocol levels
2015-07-12 13:45:52 -06:00
Gregory Nutt
3407ef5f33
netdb: Modifications to DNS client logic and to dns_get/setserver() interfaces to support DNS clients at IPv6 addresses (still no support for resolution to IPv6 addresses).
2015-07-12 11:56:53 -06:00
Gregory Nutt
5ace3311d9
Repartitioning of DNS client logic in preparation for IPv6 support
...
- Rename include/nuttx/net/dnsclient.h to dns.h
- Move internal DNS prototypes from dns.h to libc/netdb/lib_dns.h
- Global standard DNS definitions from libc/netdb/dns_soccket.c to dns.h
- Eliminate dns_gethostip(). This is now an internal part of gethostbyname()
- Eliminate interface dns_whois(). Not needed in this new context.
2015-07-12 09:19:40 -06:00
Gregory Nutt
e243b082ee
DNS: Remove some unused, non-functional DNS functions; remove the annoying _sock at the end of some DNS functions names, it is no longer needed to distinguish the functions
2015-07-11 07:17:00 -06:00
Gregory Nutt
e69d14d89b
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:41:26 -06:00
Gregory Nutt
fb70a0a95b
Fix a confitional compilation error introduced with the last commit
2015-07-10 15:52:55 -06:00
Gregory Nutt
ed004be6d0
Clean up some syscall logic that has changed due to revised netdb configuration
2015-07-10 15:41:20 -06:00
Gregory Nutt
7dec298ef3
gethostbyname() will not attempt a DNS lookup if so enabled
2015-07-10 13:30:09 -06:00
Gregory Nutt
4102470bdd
Move the DNS server from apps/netutils/dnsclient to nuttx/libc/netdb. Move netdb functions from libc/net to libc/netdb. Fix up naming to reflect the repartitioning
2015-07-10 12:11:40 -06:00
Sebastien Lorquet
9c9b6162d8
PCA9555: Extend interface to include methods for reading more than one bit at a time. From Sébastien Lorquet.
2015-07-10 10:33:07 -06:00
Gregory Nutt
59cc4a7a7b
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
...
The solution is to remove all of the memory management function calls from the interface. Instead, the interface exports the userspace heap structure and then kernel size implementations of those memory management functions will operate on the userspace heap structure. This avoids the unnecessary system calls and, more importantly, failures do to freeing memory when a test exits.
2015-07-10 08:37:02 -06:00
Sebastien Lorquet
b947002d6a
This commit adds:
...
-headers in nuttx/ioexpander to define the "generic" ioexpander framework
-files in drivers/ioexpander for the implementation of the NXP PCA9555 framework
-bindings in drivers/Kconfig and drivers/Makefile
From Sebastien Lorquet
2015-07-09 08:27:07 -06:00
Gregory Nutt
299782e8ec
Add support for gethostbyaddr()
2015-07-08 14:33:23 -06:00
Gregory Nutt
1b1e34e1d5
libc: Add gethostbyname(). Untested on initial commit
2015-07-08 13:40:52 -06:00
Gregory Nutt
f94fe747ae
Undo part of a previous change. Move get/sethostname back from net/netdb to libc/unistd
2015-07-08 11:11:52 -06:00
Gregory Nutt
6380832ab7
Move the header of set/sethostname from libc/unisted to net/netdb. This is OS internal stuff
2015-07-05 10:43:37 -06:00
Gregory Nutt
c19fd13291
gethostname() should not be the system call, uname() should and gethostname should get the host name from uname
2015-07-05 10:41:58 -06:00
Gregory Nutt
f31a96cfbf
Add system calls for gethostname and sethostname
2015-07-05 08:42:32 -06:00
Gregory Nutt
e1c306f2dd
Add support for sethostname
2015-07-05 08:42:32 -06:00
Gregory Nutt
6576672e09
uname: version string must hold 40 character value; strings returned by uname must always be NUL terminated
2015-07-05 06:46:00 -06:00
Gregory Nutt
049224f544
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
2015-07-04 10:39:24 -06:00
Gregory Nutt
b9b8b34bca
sim configuration: Add support for board_app_initialize() which is needed when CONFIG_LIB_BOARDCTL=y
2015-07-04 08:16:45 -06:00
Stavros Polymenis
701509f9bd
Add implementations of uname() and gethost(). From Stavros Polymenis.
2015-07-03 07:50:27 -06:00
Gregory Nutt
d6eacb3ab5
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
2015-07-03 06:53:51 -06:00
Gregory Nutt
27ea02a85f
Modify board_power_off() so that is is called only via boardctl()
2015-07-02 17:09:54 -06:00
Gregory Nutt
064b4923c6
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
2015-07-02 16:25:31 -06:00
Gregory Nutt
09c7373f24
Fix misc. compilation error/warning detected by tools/testbuild.sh
2015-07-01 14:33:37 -06:00
Gregory Nutt
b59329a714
include/nuttx/net/netconfig.h: Fix some backward compilation that was emitting #error in the wrong condition when SLIP was enabled
2015-07-01 11:55:40 -06:00
