Some programs use EAGAIN to determine whether all data has been read,
so cancel the error print when the error code is EAGAIN.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Example of /proc/PID/group/fd in this case:
FD OFLAGS TYPE POS PATH
17 67 9 0 socket:[domain 16, type 2, proto 0]
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Verification:
Write a packet, the length is bigger than CONFIG_DEV_FIFO_SIZE.
The return value should be -1, and the errno is EMSGSIZE.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
Verifiction:
Write a bigger packet and read the packet using a smaller buffer.
The return length of reading should be the length of smaller buffer.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
The error log is as follows:
tcp/tcp_send_buffered.c:376:57: runtime error: member access within misaligned
address 0x10075942 for type 'struct tcp_sack_s', which requires 4 byte alignment
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.
The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
net_lock/unlock is a big lock and repleace it to internal pool lock
to avoid the priority inversion problem.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
By:
1. Take out net_ip_binding_laddr/raddr macro
2. INET6_ADDRSTRLEN is long enough for all address buffer and no need to
add 0 to the end of buffer since inet_ntop will do so
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
In tcp protocol, if no ports are bound, Add random ports during the listening phase
libuvtestcase:
TEST_IMPL(tcp_listen_without_bind) {
int r;
uv_tcp_t server;
r = uv_tcp_init(uv_default_loop(), &server);
ASSERT(r == 0);
r = uv_listen((uv_stream_t*)&server, 128, NULL);
ASSERT(r == 0);
MAKE_VALGRIND_HAPPY();
return 0;
}
Signed-off-by: wangchen <wangchen41@xiaomi.com>
CC: libssh/src/auth.c
1ipfrag/ipv4_frag.c: In function 'ipv4_fragout':
ipfrag/ipv4_frag.c:224:7: error: 'ref' may be used uninitialized in this function [-Werror-maybe-uninitialized]
224 | lmemcpy(ipv4, ref, iphdrlen);
ipfrag/ipv4_frag.c:364:26: note: 'ref' was declared here
364 | FAR struct ipv4_hdr_s *ref;
CC: tls/task initinfo c
Signed-off-by: wangyingdong <wangyingdong@xiaomi.com>
We have IPV6_UNICAST_HOPS and IPV6_MULTICAST_HOPS in ipv6_setsockopt,
but only IP_MULTICAST_TTL in ipv4_setsockopt. So add IP_TTL support.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When using IOB queue to store readahead data, we use one IOB for each
UDP packet. Then if the packets are very small, like 10Bytes per packet,
we'll use ~1600 IOBs just for 16KB recv buffer size, which is wasteful
and dangerous. So change conn->readahead to a single IOB chain like TCP.
Benefits:
- Using memory and IOBs more efficiently (small packets are common in
UDP)
Side effects:
- UDP recv buffer size may count the overhead
- A little bit drop in performance (<1%, more seek & copy)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
if client is a noblocking socket, user can do close when server has not yet
invoke accept interface, so we need remove this socket from server.lc_waiters.
avoid server socket access the freed memory.
==936564==ERROR: AddressSanitizer: heap-use-after-free on address 0xf23071c8 at pc 0x58eaac3b bp 0xf0b9e218 sp 0xf0b9e208
READ of size 4 at 0xf23071c8 thread T0
#0 0x58eaac3a in dq_remfirst queue/dq_remfirst.c:45
#1 0x58fd1efe in local_accept local/local_accept.c:141
#2 0x58f66df6 in psock_accept socket/accept.c:149
#3 0x58f672a4 in accept4 socket/accept.c:280
#4 0x5be9ee0c in accept net/lib_accept.c:50
#5 0x592d6a5d in uv__accept libuv/src/unix/core.c:502
#6 0x5930d83b in uv__server_io libuv/src/unix/stream.c:550
#7 0x592efbde in uv__io_poll libuv/src/unix/posix-poll.c:335
#8 0x592d649a in uv_run libuv/src/unix/core.c:387
#9 0x5a7180f7 in service_schedule_loop service/common/service_loop.c:146
#10 0x591f300b in pthread_startup pthread/pthread_create.c:59
#11 0x5be8134f in pthread_start pthread/pthread_create.c:139
#12 0x58ee2762 in pre_start sim/sim_initialstate.c:53
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Add the proccessing logic of udp socketpair, and modify the
logic of sending and receiving for udp socketpair.
Verification:
- Use the socketpair interface to create a pair of local udp sockets,
and perform read and write operations.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
In order to support the compilation of third-party library, we encounter
some situations where the macro is not defined, refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
In file included from local/local_fifo.c:25:
In function ‘local_format_name’,
inlined from ‘local_hd_name’ at local/local_fifo.c:132:3,
inlined from ‘local_open_receiver’ at local/local_fifo.c:661:3:
local/local_fifo.c:77:16: warning: ‘%s’ directive output may be truncated writing up to 107 bytes into a region of size 100 [-Wformat-truncation=]
77 | CONFIG_NET_LOCAL_VFS_PATH "/%s%s", inpath, suffix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
local/local_fifo.c: In function ‘local_open_receiver’:
local/local_fifo.c:82:44: note: format string is defined here
82 | CONFIG_NET_LOCAL_VFS_PATH "/%s%s%" PRIx32,
| ^~
In function ‘local_format_name’,
inlined from ‘local_hd_name’ at local/local_fifo.c:132:3,
inlined from ‘local_open_receiver’ at local/local_fifo.c:661:3:
local/local_fifo.c:76:7: note: ‘snprintf’ output between 12 and 119 bytes into a destination of size 109
76 | snprintf(outpath, LOCAL_FULLPATH_LEN - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
77 | CONFIG_NET_LOCAL_VFS_PATH "/%s%s", inpath, suffix);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
There're some apps trying to set too large SO_SNDBUF and SO_RCVBUF, which may use all IOBs in one socket and block all other network traffic.
Note:
Linux silently limits SO_SNDBUF to be less than `sysctl_wmem_max`, so we can also do this limit without returning any error.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The udp connection structure contains the field, "domain", which defines which address family it belongs to. Prior to this change, this field was only populated correctly if IPv4 and IPv6 was enabled. As a result, packet information was not processed in udp_recvpktinfo, as expected when the appropriate socket option was enabled.
There is no control over whether a valid index is input when user use
ioctl to get netdev information, so removing this assertion will allow
ENODEV to be returned.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Updated alt1250 driver with regarding to the following changes.
- Add LTE hibernation feature
- Split source code per module
- Some refactoring
- Some bug fixes
ICMP's conn->dev is changing in icmp_sendmsg, when sending to different
address, or when error occurs (like NETDEV_DOWN). Then the poll callback
cannot be dropped from previous dev in free, because the dev is wrong.
So add dev to struct icmp_poll_s just like struct udp_poll_s.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When a task needs to send data, a callback is allocated and the
transmission is happening in a worker task through devif_send.
Synchronization between the two tasks (sender & worker) is
achieved by a semaphore.
If devif_send fails, this semaphore was never posted, leaving
the sending task blocked indefinitely. This commit fixes this
by checking the return code of netif_send, and posting this
semaphore in case of failure.
Polling then stops, and execution is resumed on the sending
task.
warning: (NET_SOLINGER) selects NET_UDP_NOTIFIER which has unmet direct dependencies
(NET && NET_UDP && !NET_UDP_NO_STACK && SCHED_WORKQUEUE)
Signed-off-by: chao an <anchao@xiaomi.com>
Problem:
When tcp_close_work starts to run in LPWORK, if another event comes and
calls tcp_free before tcp_close_work takes net_lock, the tcp_free will
be called twice and cause double free.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This is a refactored version of the SLIP network driver. Updates
include:
1. The original design started two kernel threads per SLIP device.
The refactored version uses file_poll to essentially be driven
by the UART RX and TX interrupts and pushes work to the low
priority work queue.
2. The SLIP byte un-/stuffing is more efficient now, using memcpy
instead of handling each byte individually.
3. The switch of the old SLIP driver to IOBs caused buffer overwrites
if packets were sent that would not fit into a single IOB. This is
fixed now.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
When do socket bind, if the connection domain is not equal to the bound address type, this will cause the stack-buffer-overflow.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
- NewReno congestion control algorithm is used to solve the problem
of network congestion breakdown. NewReno congestion control includes
slow start, collision avoidance, fast retransmission, and fast
recovery. The implementation refers to RFC6582 and RFC5681.
- In addition, we optimize the congestion algorithm. In the conflict
avoidance stage, the maximum congestion window max_cwnd is used to
limit the excessive growth of cwnd and prevent network jitter
caused by congestion. Maximum congestion window max_cwnd is updated
with the current congestion window cwnd and the update weight is
0.875 when an RTO timeout occurs.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
recvmsg() will incorrectly return 0 if the count of sema before waiting is greater than 0,
This commit will reinitialize the sema count before waiting:
1181 static ssize_t rpmsg_socket_recvmsg(FAR struct socket *psock,
1182 FAR struct msghdr *msg, int flags)
1183 {
...
1255 ret = net_sem_timedwait(&conn->recvsem,
1256 _SO_TIMEOUT(conn->sconn.s_rcvtimeo)); // recvsem.sem_count == 1; return 0
...
1264 if (!conn->recvdata) // recvdata not consumed; goto else
1265 {
1266 ret = conn->recvlen;
1267 }
1268 else
1269 {
1270 conn->recvdata = NULL;
1271 }
...
1282 return ret; // BUGON! incorrectly return 0 to user
1283 }
Signed-off-by: chao an <anchao@xiaomi.com>
Added simple support for IPV6_UNICAST_HOPS and IPV6_UNICAST_HOPS, the application can configure the ttl parameters of the socket in user mode.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
RFC 1191
When a router is unable to forward a datagram because it exceeds the
MTU of the next-hop network and its Don't Fragment bit is set, the
router is required to return an ICMP Destination Unreachable message
to the source of the datagram, with the Code indicating
"fragmentation needed and DF set". To support the Path MTU Discovery
technique specified in this memo, the router MUST include the MTU of
that next-hop network in the low-order 16 bits of the ICMP header
field that is labelled "unused" in the ICMP specification [7]. The
high-order 16 bits remain unused, and MUST be set to zero. Thus, the
message has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 3 | Code = 4 | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| unused = 0 | Next-Hop MTU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Internet Header + 64 bits of Original Datagram Data |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RFC 1185
Packet Too Big Message
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MTU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| As much of invoking packet |
+ as will fit without the ICMPv6 packet +
| exceeding 576 octets |
IPv6 Fields:
Destination Address
Copied from the Source Address field of the invoking
packet.
ICMPv6 Fields:
Type 2
Code 0
MTU The Maximum Transmission Unit of the next-hop link.
Description
A Packet Too Big MUST be sent by a router in response to a packet
that it cannot forward because the packet is larger than the MTU of
the outgoing link. The information in this message is used as part
of the Path MTU Discovery process [RFC-1191].
Signed-off-by: wangchen <wangchen41@xiaomi.com>
Commit 4d6a8663fa made pipes and
named pipes block when opening for O_WRONLY or O_RDONLY. Local
sockets, however, require `local_open_client_tx` to be non-blocking
to enable the server side to prevent the server side from blocking.
If set otherwise, it would deadly block. This commit sets the FIFO
as non-blocking temporarily, open the TX side and, if originally
blocking - restores it to that state.
added IPV6_RECVHOPLIMIT support so that fd of SOCK_RAW ICMPV6 can obtain ttl
information, some network related tools use this feature.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
utils/net_cmsg.c: In function 'cmsg_append':
utils/net_cmsg.c:82:23: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
82 | msg->msg_control += cmsgspace;
| ^~
cc1: all warnings being treated as errors
Using void pointers in arithmetic operations is a GCC extension, it is
not supported by the standard. Because what is the size of a void ?
move the IPPROTO_IP/IPPROTO_IPV6 flag into the socket_conn_s structure to
make it more than just control udp.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The third-party library we are porting will send and receive ICMPV6 messages
(router_advert / router_solicit / neighbor_advert / neighbor_solicit etc.)
from the user mode itself, so we added the SOCK_RAW related implementation
for ICMPV6.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
since iob offload, ipvx_dev_forward will remove d_iob, if there are multiple
devices, d_iob will be NULL when dev_forward is entered second time. and the
device that receives the packet cannot process the packet after forwarding it
so the iob copy is added.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
- Before IOB offload, srcaddr / src_addr_size / ifindex are written into
IOB by iob_trycopyin, so io_pktlen > 0 is always true, this check is
correct at that time. (It won't fail with zero-length UDP datagram.)
- After IOB offload, srcaddr / src_addr_size / ifindex are written into
offset 0, without increasing io_pktlen. So this check will fail with
zero-length UDP datagram now.
- We need to support zero-length UDP datagram and this check is
unnecessary at this point.
- https://stackoverflow.com/questions/5307031/how-to-detect-receipt-of-a-0-length-udp-datagram
- https://github.com/apache/nuttx/blob/nuttx-12.1.0/net/udp/udp_callback.c#L214
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
If TCP_FIN is received before the user calls accept, the later accept will
report an error, then the previously received data cannot be read.
operation flow:
tcp_server_listen -> tcp_client_connect -> tcp_client_send ->
tcp_client_close -> tcp_server_accept(fix this error) -> tcp_server_recv
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
multiple control message options are enabled, such as IPV6_RECVPKTINFO and
IPV6_RECVHOPLIMIT, so I changed the Filling implementation of the control
message.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Timestamp location in can message has changed,
In the original logic timestamp is saved at the end of the data segment:
io_data
-------------------------------------------------
| CAN message | Time Stamp |
-------------------------------------------------
|<--------------- io_len ---------------->|
In the new structure timestamps will reuse NET_LL_GUARDSIZE to isolate CAN messages:
io_data io_offset
-------------------------------------------------
| Time Stamp | CAN message |
-------------------------------------------------
|<-------- io_len --------->|
This PR will:
1. Increase NET_LL_GUARDSIZE to 16 (sizeof(struct timeval)) if NET_CAN && NET_TIMESTAMP are enabled
2. Apply timestamp to adapt to the new structure
Signed-off-by: chao an <anchao@xiaomi.com>
We have a case that an http server gives out-of-ordered ACKs, and NuttX client makes `ofoseg`s with length 0, trying to rebuild / put them into `ofosegs` array, which is not intended (no available data and should be skipped). This breaks later logic and finally crashed in `tcp_ofoseg_bufsize` (`ofosegs[i].data` is `NULL`, which should never happen in normal logic).
Note:
- `iob_trimhead` won't return `NULL` when it's applying on normal IOB.
- Keep `dev->d_iob == NULL` to avoid `iob_trimhead` changed.
- `iob_free_chain` will do nothing when applied to `NULL`.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
We have projects that need to sense ip address changes in time,
and set ip address or clear ip address through netlink
so the relevant implementation is added.
The usage and command structure are consistent with linux
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The rpmsg addr get from socket accept has rp_family=0, which is not
intended, to avoid wrong logic in other place, set the rp_family
in ns_bind function.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
According to RFC 2525, Section 2.17:
"When an application closes a connection in such a way that it can no longer read any received data, the TCP SHOULD, per section 4.2.2.13 of RFC 1122, send a RST if there is any unread received data, or if any new data is received."
When our TCP socket is closed (even when the thread has exited), the peer can keep sending data and NuttX keeps replying ACK (we've tried for ~12h). This is not a good behavior (also different from Linux), so send RST instead of ACK for data receiving in FIN_WAIT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Problem:
A SOCK_CTRL socket may be led to udp_pollsetup but never reaches
udp_pollteardown, it seems that we shouldn't call udp_pollsetup for
other socket types.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
There might be some cases that we receive an event after socket is closed because of out-of-ordered rpmsg, since it may not cause problem, we may omit the error.
Also change log level to err when returning negated errno, because if we return negated errno, we'll directly trigger RPMSG_ASSERT outside, so we need at least an error message to indicate the reason.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
The priorities for finding a network adapter are as follows:
1. if laddr is not ANY, use laddr to find device;
2. if laddr is ANY, and bound index is not 0, use bound index
to find device;
3. if laddr is ANY and no device is bound, use raddr to find
device.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
1.
net/slip.c:865:29: warning: unused variable ‘priv’ [-Wunused-variable]
865 | FAR struct slip_driver_s *priv =
| ^~~~
net/slip.c: In function ‘slip_rmmac’:
net/slip.c:895:29: warning: unused variable ‘priv’ [-Wunused-variable]
895 | FAR struct slip_driver_s *priv =
| ^~~~
2.
local/local_sendmsg.c: In function ‘local_sendmsg’:
local/local_sendmsg.c:423:18: warning: ‘count’ may be used uninitialized in this function [-Wmaybe-uninitialized]
423 | return count;
| ^~~~~
local/local_sendmsg.c:131:11: warning: ‘i’ may be used uninitialized in this function [-Wmaybe-uninitialized]
131 | while (i-- > 0)
| ~^~
local/local_sendmsg.c:71:7: note: ‘i’ was declared here
71 | int i;
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
1.
ipfrag/ipv4_frag.c: In function ‘ipv4_fragin’:
ipfrag/ipv4_frag.c:184:22: warning: ‘head’ may be used uninitialized in this function [-Wmaybe-uninitialized]
184 | ipv4->len[1] = head->io_pktlen & 0xff;
| ~~~~^~~~~~~~~~~
ipfrag/ipv4_frag.c:123:21: note: ‘head’ was declared here
123 | FAR struct iob_s *head;
| ^~~~
2.
devif/ipv6_input.c: In function ‘ipv6_in’:
devif/ipv6_input.c:60:33: error: ‘TCPIPv6BUF’ undeclared (first use in this function); did you mean ‘UDPIPv6BUF’?
60 | #define PAYLOAD ((FAR uint8_t *)TCPIPv6BUF)
| ^~~~~~~~~~
3.
nat/ipv4_nat.c: In function ‘ipv4_nat_inbound_icmp’:
nat/ipv4_nat.c:67:30: error: ‘TCP_HDRLEN’ undeclared (first use in this function); did you mean ‘UDP_HDRLEN’?
67 | ((proto) == IP_PROTO_TCP ? TCP_HDRLEN : \
| ^~~~~~~~~~
nat/ipv4_nat.c:323:47: note: in expansion of macro ‘L4_HDRLEN’
323 | inner_l4hdrlen = MIN(inner_l4len, L4_HDRLEN(inner->proto));
| ^~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
Receiving an ACK indicating TCP Window Update will not set ACKDATA flag (because tx_unacked is 0) in our TCP stack. Then this ACK won't let us send anything after receiving it, even if it updates snd_wnd. So we need to check whether we can send data immediately when our snd_wnd is updated (especially from 0), otherwise we will only send next data after timer expiry.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
Regression by:
| commit 7fce145b30
| Author: chao an <anchao@xiaomi.com>
| Date: Mon Jan 30 21:36:39 2023 +0800
|
| net/devif: check the net device before use
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Issue:
TCP rx buffer is freed after 4-way handshake with current design.
3 socket's rx buffer might be consumed during ffmpeg switch music procedure,
and this might cause IOB exhausted.
Solution:
free TCP rx buffer immediately in tcp_close to make sure IOB won't be
exhausted.
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
This reverts commit fbe641a916.
This issue already fixed by below change:
| commit 715785245c
| Author: chao an <anchao@xiaomi.com>
| Date: Mon Jan 16 12:37:44 2023 +0800
|
| net/tcp: fix potential busy loop in tcp_send_buffered.c
|
| if the wrbuffer does not have enough space to send the rest of
| the data, then the send function will loop infinitely in nonblock
| mode, add send timeout check to avoid this issue.
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
tcp_input:
If we didn't find an active connection that expected the packet,
If the SYN flag isn't set,
It is an old packet and we send a RST.
conn is NULL when this case
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The following build error happens when CONFIG_NET_IPv6 is enabled and CONFIG_NET_UDP is not enabled.
inet/ipv6_setsockopt.c:132:19: error: invalid use of undefined type 'struct udp_conn_s'
132 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~
inet/ipv6_setsockopt.c:132:30: error: '_UDP_FLAG_PKTINFO' undeclared (first use in this function)
132 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~~~~~~~~~~~~~~~~
inet/ipv6_setsockopt.c:132:30: note: each undeclared identifier is reported only once for each function it appears in
inet/ipv6_setsockopt.c:136:19: error: invalid use of undefined type 'struct udp_conn_s'
136 | conn->flags &= ~_UDP_FLAG_PKTINFO;
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
When using PIPE connect to a file, ENOTSOCK or ECONNREFUSED should be returned
and when using PIPE connect to invalid pipe name, ENOENT should be returned in libuv
Signed-off-by: yintao <yintao@xiaomi.com>
psock_tcp_send will enter busyloop state when no IOB keeps at unavailable state
when the socket is blocking socket and this will cause WDT.
According to socket's manpage, -1 should be returned while errno set to EAGAIN
if send/recv timeout was set.
Here's the description:
SO_RCVTIMEO and SO_SNDTIMEO
Specify the receiving or sending timeouts until reporting an error. The argument is a struct timeval. If an input or output function blocks for this period of time, and data has been sent or received, the return value of that function will be the amount of data transferred; if no data has been transferred and the timeout has been reached then -1 is returned with errno set to EAGAIN or EWOULDBLOCK, or EINPROGRESS (for connect(2)) just as if the socket was specified to be nonblocking. If the timeout is set to zero (the default) then the operation will never timeout. Timeouts only have effect for system calls that perform socket I/O (e.g., read(2), recvmsg(2), send(2), sendmsg(2)); timeouts have no effect for select(2), poll(2), epoll_wait(2), and so on.
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
UDP linger timeout will be wrongly converted to UINT_MAX by _SO_TIMEOUT() when it is set to 0,
net/socket/socket.h:
|
| # define _SO_TIMEOUT(t) ((t) ? (t) * MSEC_PER_DSEC : UINT_MAX)
net/udp/udp_close.c:
|
| if (_SO_GETOPT(conn->sconn.s_options, SO_LINGER))
| {
| timeout = _SO_TIMEOUT(conn->sconn.s_linger);
| }
this change will correct this behavior, if the linger is set to 0, the timeout value should be 0
Signed-off-by: chao an <anchao@xiaomi.com>
1. Remove tcp_txdrain() from close() to avoid indefinitely block
2. Send TCP_RST immediately if linger timeout
Signed-off-by: chao an <anchao@xiaomi.com>
Merge conflicts lead to code being placed in thre wrong place
The debug code should placed in tcp_send() not tcp_synack()
Signed-off-by: chao an <anchao@xiaomi.com>
if the wrbuffer does not have enough space to send the rest of
the data, then the send function will loop infinitely in nonblock
mode, add send timeout check to avoid this issue.
Signed-off-by: chao an <anchao@xiaomi.com>
Allocate the device buffer only if the protocol really need to send data.
not all protocols require the driver to prepare additional iob before
sending, especially UDP, each iob reserves l2/l3 header in advance
after prepare write buffer, net device could reuse this entry to send directly
Signed-off-by: chao an <anchao@xiaomi.com>
When trying to use iperf2, we found it comsumes all the IOB when sending UDP packets, then devif_poll has no IOB to send the packet out, so speed drops to 0 and never recovers.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
epoll_wait collects revent by checking fds->revent,
but local_socket will copy fds to the other two private pollfd shandow struct,
then the pipe_poll will not be able to update fds->revent directly,
so need local_socket save fds and implement a private poll_notify function
to passing revent to original fds->revent.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Previously, the devif_poll works in this flow:
devif_poll_xx -> bstop = callback -> continue if !bstop -> poll another
Now we split the polling and callback, so it should work like:
devif_poll_connections -> return true if callback need to be called
-> bstop = callback -> loop if !bstop -> poll again
Conditions:
poll_connections == 0, d_len == 0, break, return 0
poll_connections == 1, d_len == 0, break, return 1 (other stop case,
don't callback)
poll_connections == 1, d_len > 0, callback == 1, break, return 1
poll_connections == 1, d_len > 0, callback == 0, loop
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When ipv4_input/ipv6_input called by devif_loopback writes wrong data into buffer (another bug we're fixing), the else block does nothing but only record the 'dropped' statistic, then infinite loop happens.
Refers to previous lo device with dropping logic:
https://github.com/apache/nuttx/blob/releases/11.0/drivers/net/loopback.c#L178-L180
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Fragmentation of network data will intensify iob consumption, if
the device receives a message storm of fragmented packets, the iob
cache will not be effectively used, this is not allowed on iot devices
since the resources of such devices are limited. Of course, this
also takes some disadvantages: data needs to be copied.
This option will brings some balance on resource-constrained devices,
enable this config to reduce the consumption of iob, the received iob
buffers will be merged into the contiguous iob chain.
Signed-off-by: chao an <anchao@xiaomi.com>
