Commit Graph

199 Commits

Author SHA1 Message Date
Xiang Xiao
eb4121ce38 Change all 'Nuttx' to 'NuttX'
Unify the naming convention

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-20 01:45:06 -07:00
Adam Feuer
6e7d966b0a converted spaces to tabs for giant-board entries 2020-09-16 13:24:41 -06:00
Adam Feuer
cab35983d4 giant-board support (SAMA5D27C-D1G) 2020-09-16 13:24:41 -06:00
Matias N
fd615d1cd9 Add support for NRF52832 MakerDiary MDK board 2020-08-30 18:15:26 +02:00
Matias N
06a223976c initial support for nrf52832-sparkfun board 2020-08-24 14:36:43 +01:00
Brennan Ashton
aef6f4ae09 Add initial support for the QuickLogic EOS S3
The QuickFeather board added as an initial target.
These featrues are minimally implemented:
  * Clock Configuration -- All clocking registers are defined and
    configuration is used to setup the HSO, M4 Core, and M4 Perif
    clocks.  Additionally some clock debugging is stubbed for
    bringing out clock paths to IO pins.

  * UART -- The lowputc as well as the serial driver is implemnted
    for the single UART device. Currently the configuration is
    hard coded, but uses the proper interfaces to later fill in.

  * SysTick -- The system tick timer is implemented and clocking
    properly. Tickless mode is not yet implemented.

  * Interrupts -- The interrupt system is implemented and verified
    using the UART and SysTick systems.

  * GPIO -- GPIO and IOMUX systems are defined and implemented.
    This is verified using the UART as well as the Arch LED
    system.  The GPIO interupt system is stubbed out but not
    implemented.

  * Arch LEDS -- The blue LED as part of the RGB LED is configured
    and attached to the Arch LED system.  This indicates the device
    coming online as well as when a hardfault is triggered.

Applications and Testing:
  * There is a nsh configuration implemented that includes debug
    features as well as the ostest, getprime, and mem test.
    All of these have been run and verified.

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-07-15 11:25:30 +01:00
Jacob Dahl
b12b3072e8 Added support for STM32F412xx. Tested with the NUCLEO-F412ZG dev board as well as a custom board using the STM32F412CE. 2020-06-29 17:44:35 +02:00
Masayuki Ishikawa
d0158fe8d8 boards: Fix Kconfig for maix-bit with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-06-08 07:57:47 +02:00
Huang Qi
2b0324c3bf boards/risc-v/k210/maix-bit: Add initial autoled support
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2020-06-08 10:53:29 +09:00
Alan C. Assis
1e8cd3f189 Add initial support to STM32F411-Minimum board (aka BlackPill) 2020-06-07 02:29:16 +01:00
Nathan Hartman
bb10e0fc25 Add support for STM32G474: Add B-G474E-DPOW1 board
Add support for the STM32G474 family of microcontrollers and the
B-G474E-DPOW1 Discovery Board, which features a STM32G474RET6.

This is a major pull request as it adds support for an entirely
new family of STM32. This support is implemented in
arch/arm/src/stm32 and shares implementation with other STM32
families supported by that code, such as the 'L15xx, 'F10xx,
'F20xx, 'F3xxx, and 'F4xxx.

boards/Kconfig:

    * Make NuttX recognize the existence of b-g474e-dpow1,
      the B-G474E-DPOW1 Discovery Board.

boards/arm/stm32/b-g474e-dpow1/Kconfig:
boards/arm/stm32/b-g474e-dpow1/README.txt:
boards/arm/stm32/b-g474e-dpow1/configs/nsh/defconfig:
boards/arm/stm32/b-g474e-dpow1/include/board.h:
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
boards/arm/stm32/b-g474e-dpow1/scripts/ld.script:
boards/arm/stm32/b-g474e-dpow1/src/.gitignore:
boards/arm/stm32/b-g474e-dpow1/src/Make.defs:
boards/arm/stm32/b-g474e-dpow1/src/b-g474e-dpow1.h:
boards/arm/stm32/b-g474e-dpow1/src/stm32_appinit.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_autoleds.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_boot.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_userleds.c:

    * Add minimal support for the B-G474E-DPOW1 Discovery
      Board. The board boots successfully through to the
      NSH prompt. NSH runs and is responsive.

With big thanks for detailed code review and suggestions:
    David Sidrane (davids5)
    Mateusz Szafoni (raiden00)
    Abdelatif Guettouche (Ouss4)
2020-05-23 09:02:00 -03:00
NicoMayer
afe08b666c
boards/arm/stm32/nucleo-f429zi: Port Nuttx to Nucleo-F429zi (#752)
* boards/arm/stm32/nucleo-f429zi: Initial port to nucleo-f429zi board.

* boards/arm/stm32/nucleo-f429zi: Add two demo configs.

* Add the nucleo-f429zi to boards/Kconfig

boards/Kcondig: Fixed line alignment issue.

* boards/arm/stm32/nucleo-f429zi: Change the license header of all new files to an Apache 2.0 license.

* boards/arm/stm32/nucleo-f429zi: nxstyle fixed
2020-04-09 03:59:57 -07:00
hartmannathan
bfc153ca27
Fix typos in comments and documentation (#750)
* Fix typos in comments and documentation
2020-04-08 06:45:35 -06:00
raiden00pl
1b4425ab5d boards/arm/xmc4: add initial support for the Infineon XMC4700 Relax board 2020-03-22 08:29:51 -06:00
aenrbes
d450f5ce77
Add support for Litex VexRiscV. 2020-03-21 06:01:56 +00:00
liuhaitao
0a9ac2a689 boards/x86_64: correct qemu intel64 Kconfig path to fix build break
Correct qemu intel64 Kconfig path to fix 'make olddefconfig' failed.

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-03-04 00:29:14 -06:00
Sonic Yang
b984752aec Flat address x86_64 port of Nuttx (#411)
* arch: x86_64: Pour-in the x86_64 code from cRTOS repository, excluding modifications of NuttX kernel, jailhouse support and linux compatibility layer

* arch: x86_64: Refactor x86_64 loading procedure for better comprehension and included support for multiboot2

* arch: x86_64: Locate the kernel at 4GB~ and modify the page table initializing procedure accordingly

* arch: x86_64: Implemented kconfig option for various x86_64 capabilities, dynamic probe and check capability on lowsetup before enabling

* arch: x86_64: inte64_check_capability: Use Marco to prettify the capability checking procedure

* arch: x86_64: intel64_timerisr.c: Refactor with new frequency calibrating method

* arch: x86_64: Fix C alias of page table and GDT/IST

* arch: x86_64: Reload GTDR with GDT in high address in up_lowsetup

* arch: x86_64: Consolidate MSR definition in arch/arch.h

* arch: x86_64: Edit the way of handling GDT/IST in C into structures

* arch: x86_64: Correct the starting point of isr/irq stack

* arch: x86_64: Update up_initialize.c with the new initializing procedure

* arch: x86_64: up_map_region now take flags instead of assuming WR/PRESENT

* arch: x86_64: Overhual of interrupt initialization procedure

* arch: x86_64: Properly configure the heap to be memory as [_ebss, end of memory]

* arch: x86_64: Try to probe the TSC frequency, fall-back to user specified frequency on failure

* arch: x86_64: Remove debug printing during restore_aux, causing infinite CTX bug

* arch: x86_64: for X86 16500 serial interrupt to work, OUT2 of MCR must be 1. Make it stuck at 1 after boot

* arch: x86_64: Correctly apply license header, comment and format code

* arch: x86_64: properly send a SIGFPE on floating point error

* arch: x86_64: Remove unused variable in up_restore_auxstate

* arch: x86_64: properly trash the processor with an infinite loop

* arch: x86_64: Fix typo in ISR handler causing ISR not handled

* arch: x86_64: Fix possibile race conditions with scheduler debug option on in signal handling path

* arch: x86_64: Fix typo in MSR_X2APIC_LVTT_TSC_DEADLINE

* arch: x86_64: Migrate tickless implementation to the new MSR naming and frequency calibration method

* board: x86_64: qemu: Add guard to exclude up_netinitialize when compiling without net support

* arch: x86_64: update defconfigs

* arch: x86_64: rename qemu as qemu-intel64

* arch: x86_64: update Board readme
2020-03-03 19:02:59 -06:00
Gregory Nutt
5a3e8874bc boards/z80/ez80/z20x: Initial port to z20x board.
The Z20X is a simple expandable DIY computing system, built around the eZ80 microprocessor.  Reference: https://z20x.computer
2020-02-21 15:20:36 +01:00
Gregory Nutt
10721c0826 Kconfig: Move the ARCH_PHY_INTERRUPT option to net/Kconfig and make it
unconditionally selectable.
2020-02-09 00:55:41 +00:00
Peter van der Perk
499607d68f
S32K add support for Nxp drone boards (#224)
* S32K add support for Nxp drone boards

* Update arch/arm/src/s32k1xx/hardware/s32k1xx_rtc.h codestyle

Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>

Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
2020-02-07 04:53:40 -08:00
Xiang Xiao
540e947c0c Run ./tools/refresh.sh --silent all 2020-01-22 20:47:18 -06:00
Xiang Xiao
7d33af1360 Change boards/z16/z16f2811 to boards/z16/z16f
to fix the follow error:
Refresh z16f2800100zcog/nsh
LN: include/arch to arch/z16/include
LN: include/arch/board to /workspace/mirtos/nuttx/boards/z16/z16/z16f2800100zcog/include
No directory at /workspace/mirtos/nuttx/boards/z16/z16/z16f2800100zcog/include
2020-01-22 20:46:02 -06:00
Xiang Xiao
12cc24abb2 Change boards/renesas/sh7032 to boards/renesas/sh1
to fix the follow error:
Refresh us7032evb1:nsh
LN: include/arch to arch/renesas/include
LN: include/arch/board to /workspace/mirtos/nuttx/boards/renesas//us7032evb1/include
No directory at /workspace/mirtos/nuttx/boards/renesas//us7032evb1/include
2020-01-22 20:45:11 -06:00
Xiang Xiao
9a8ff07716 Change boards/renesas/m32262f8 to boards/hc/m16c
to fix the follow error:
Refresh skp16c26/ostest
LN: include/arch/board to /workspace/mirtos/nuttx/boards/renesas/m32262f8/skp16c26/include
LN: include/arch/chip to arch/renesas/include/m32262f8
2020-01-22 20:44:18 -06:00
Xiang Xiao
3db775f0d0 Change boards/hc/mcs92s12ne64 to boards/hc/m9s12
fix the follow error:
Refresh demo9s12ne64/ostest
LN: include/arch/board to /workspace/mirtos/nuttx/boards/hc/mcs92s12ne64/demo9s12ne64/include
LN: include/arch/chip to arch/hc/include/mcs92s12ne64
No directory at /workspace/mirtos/nuttx/arch/hc/include/mcs92s12ne64
2020-01-22 20:43:26 -06:00
Adam Feuer
237c0cca09 CDC ECM Ethernet over USB High Speed for SAMA5D36-Xplained #68
Author: Alan Carvalho de Assis <acassis@gmail.com>

    Run nxstyle against .c .h files and fix it

Author: Adam Feuer <adam@starcat.io>

Summary

    Adds CDC ECM Ethernet over USB High Speed for SAMA5D36-Xplained
      (and maybe other boards) (most of the code was there already,
      but didn't work out of the box for the SAMA5D36-Xplained)
    Only SAMA5D36-Xplained has been tested so far

Impact

    None if you don't use the CDC ECM Ethernet driver
    On SAMA5D36-Xplained, this adds high-speed Internet connectivity
      over USB 2.0 High Speed. via the USB CDC ECM Gadget driver.
    It may work on other boards too.
    This also fixed full-speed (low-speed) mode for the board too.

Limitations

    Hasn't been tested on anything other than SAMA5D36-Xplained board.

TODO

    Ideally this would include a composite RNDIS device so it would
      also work seamlessly on Windows. That is for a future PR
    Ideally this would include software to help configuration via
      mDNS/DNS-SD for plug and play compatibility with Linux and macOS.
      That is for a future PR.

Detail

    Only a few lines of C driver code needed to be changed, since the
      capability was there already. The rest is config and documentation.
    Changes the SAMA5D3-Xplained board bringup to match the SAMA5D3-EK
      board bringup
    A helper script to configure Linux routing and iptables NAT is also
      provided, along with documentation on how to use it.

Testing

    Manual, on a Ubuntu Linux 19.10 system and MacOS 10.14.6 Mojave
      MacBook Pro.

How To Verify

    Follow the new CDC ECM Ethernet over USB instructions in the board
      README.txt file

Commits:

    remove non-UTF-8 chars in comment and reformat

    removed unneeded comment markers

    instructions for using the defconfigs

    removed EMAC from config

    - to prove this example only needs the CDC ECM Ethernet over USB to work

    added CDC-ECM Ethernet over USB info to README

    added U-Boot image

    added netusb helper script

    - this can configure the Linux network interface and routes
      so you can ping or access the NuttX system via TCP/IP.

    renamed defconfig dirs to be ethernet-over-usb

    - was usb-over-ethernet which is not right

    added USB DMA to defconfigs

    updated readme with autoboot and debugging info

    bringing ethernet-over-usb examples into parity

    added cdc ecm ethernet over usb with telnetd config

    added defconfig

    only use phy interrupt if netdevices is ethernet

    - because now netdevice could be CDC ECM ethernet over usb
      which has no PHY interrupt

    add bringup to Makefile

    add bringup

    app init cleanup

    init cdc ecm driver and rndis driver; some cleanup

    fixed some typos and odd characters

    usb over ethernet working over usb 2.0 hs
2020-01-10 07:13:37 -03:00
jjlange
084f81e76e Author: Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h files in last PR through nxstyle.

Author: macman88 <jjlange91@gmail.com>

    SAME5x Ethernet Support (#25)

     boards/arm/samd5e5/same54-xplained-pro/:  Adds basic support for Microchip SAM E54 Xplained Pro board.
    arch/arm/src/samd5e5/:   Adds an Ethernet driver for the SAME5x family (based on the SAMA5 GMAC driver).
2020-01-02 12:35:45 -06:00
Masayuki Ishikawa
e33fc3dc89 Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>

    Run all .c and .h modified in PR through nxstyle.

Author: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>

    feature k210 (#16)

    * arch: risc-v: Add support for __LP64__ to types.h
    * arch: risc-v: Add support for RV64GC to common files
    * arch: risc-v: Add support for Kendryte K210 processor (RV64GC)
    * boards: risk-v: Add support for Sipeed Maix Bit with K210
    * tools: Add support for Kendryte K210 processor
2019-12-31 09:06:20 -06:00
Masayuki Ishikawa
466ab56c10 Merged in masayuki2009/nuttx.nuttx/fe310_gpio (pull request #1097)
fe310 gpio

* arch: risc-v: Add arch/risc-v/src/common/up_mdelay.c

* arch: risc-v: Add arch/risc-v/src/common/up_udelay.c

* arch: fe310: Add #include <stdint.h> to fe310_start.c

* arch: risc-v: Add up_ack_irq() definition to commpn/up_internal.h

* arch: fe310: Add FE310 GPIO driver

* boards: hifive-revb: Add compiler optimization

* boards: hifive1-revb: Add auto leds related files.

* arch: fe310: Add CPU activity led to fe310_idle.c

* boards: hifive-revb: Add a button

    NOTE: still having a trouble in signal handling.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-12-19 04:59:30 +00:00
raiden00pl
a0429bcb20 Merged in raiden00/nuttx_nrf52 (pull request #1096)
nrf52 updates

board/arm/nrf52/nrf52832-dk: use the on-board virtual COM pins as default UART0 configuration

board/arm/nrf52: initial support for the nrf52840-dk board

board/arm/nrf52: initial support for the nrf52840-dk dongle board

arch/arm/src/nrf52: add support for port 1 GPIO

arch/arm/src/nrf52: initial support for UART1

arch/arm/src/nrf52: add UICR definitions

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-12-16 18:35:45 +00:00
Masayuki Ishikawa
7a8e9581ca Merged in masayuki2009/nuttx.nuttx/hifive1-qemu (pull request #1078)
HiFive1 with qemu

* arch: risc-v: Add include/.gitignore

* arch: risc-v: Add src/.gitignore

* arch: risc-v: Remove uncommon function prototypes in include/irq.h

* arch: risc-v: Add missing symbols and function prototypes in src/common/up_internal.h

* arch: risc-v: Add src/common/up_modifyreg32.c

* arch: risc-v: Enable include Make.dep in src/Makefile

* arch: risc-v: Fix stack coloration in common/up_createstack.c

* arch: risc-v: Add common/up_puts.c

* arch: risc-v: Add common/up_checkstack.c

* arch: rv32im: Move all logics from up_dumpstate.c to up_assert.c

    This change is same as other architectures like arm/src/armv7-m

* arch: Select ARCH_HAVE_STACKCHECK for RISC-V in Kconfig

* arch: risc-v: Add SiFive fe310 processor

    NOTE: Currently only tested with qemu

* boards: hifive1-revb: Add SiFive hifive1-revb board

    NOTE: Currently only tested with qemu

* tools: Add fe310 processor to configure.sh

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-11-28 20:37:24 +00:00
Lwazi Dube
25aa695a35 Reviewed by David Sidrane.
boards/arm/stm32h7/stm32h747i-disco:  Remove references to nucleo in the stm32h747i-disco board.
arch/arm/include/stm32h7, arch/arm/src/stm32h7, and boards/arm/stm32h7/stm32h747i-disco:  Add support for the STM32H747I-DISCO board.
2019-11-18 14:03:38 -06:00
Dave Marples
b10737864f boards/arm/imxrt/imxrt1020-evk: Add support for the MIMXRT1021-EVK board. It features nsh, netnsh and usdhc sample configurations. 2019-11-08 17:18:01 -06:00
David Alessio
0154126c01 boards/Kconfig: Newer Olimex E407 boards are populated with STM32407ZE chips. 2019-11-05 07:12:07 -06:00
Gregory Nutt
118d611a8b Squashed commit of the following:
board/boarctl.c:  Add support for the new BOARDIOC_ROMDISK command.  This allows applications to create ROMFS block drivers without illegal direct calls to romdisk_register.

    include/sys/boardctl.h:  Add basic definitions to support a ROM disk creation boardctl() command.
2019-10-26 13:42:40 -06:00
Anjana
fae7e63479 We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces
1. Serial (UART) driver (13 ports)
2. Ethernet driver

This port is provided on two boards
1. RSK RX65N-2MB
2. GR-Rose

The port is built on Cygwin environment.

As part of this port, we have created two documents
1. Readme.txt for each board
2. User manual to provide information about development environment setup
Both these documents are placed under
1. /boards/renesas/rx65n/rx65n-grrose
2. /boards/renesas/rx65n/rx65n-rsk2mb

We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform.
We have shared the log with no errors as confirmation of valid port.
2019-10-11 23:36:57 +08:00
Xiang Xiao
3bc62f1ccc Change space to tab and help to ---help--- in Kconfig files. 2019-10-05 21:39:12 -06:00
Nathan Hartman
46aaec7ba0 Fix minor typos in docs and comments. 2019-09-29 12:52:20 -06:00
Alan Carvalho de Assis
35227fb873 boards/arm/samd2l2/arduino-m0: Add initial board support for the Arduino M0. 2019-09-22 10:43:36 -06:00
Daniel Pereira Volpato
d78e60d18e boards/arm/stm32f0l0g0/nucleo-g070rb: Initial support for board STM32 NUCLEO-G070RB, including NSH config 2019-09-17 11:20:26 -06:00
Nathan Hartman
f6b80dd0f9 boards/Kconfig: Fix help text for BOARDCTL_IOCTL. 2019-09-06 15:55:57 -06:00
Gregory Nutt
e5c3874a3b Tiva directories: Fix TM4C129XNCZAD part number in Kconfig and identifiers. Rationale: Fully specify that this is the 212-pin BGA package (ZAD ending) and for consistency with earlier changes to other Tiva TM4C12x part numbers in Kconfig names and identifiers. 2019-08-30 08:46:57 -06:00
Gregory Nutt
c354e8f40e board/Kconfig and board/README.txt: Add configuration support for the LX_CPU board. 2019-08-30 07:50:46 -06:00
Gregory Nutt
507e01cb8e This commit adds support for the NXP S32K148EVB
Squashed commit of the following:

    boards/arm/s32k1xx/s32k148evb:  Correct linker scripts for the S32K148, Update README files, Hook eht S32K148EVB into the configuration and build system.

    arm/s32k1xx/s32k148evb:  Verify core and peripheral clocking.  It is the same as the S32K146EVB.  Fixed one-too-many copy-paste error in both.

    boards/arm/s32k1xx/s32k148evb:  Correct LED and button pin number for the S32K148EVB.

    boards/arm/s32k1xx/s32k148evb:  Change all occurrences of 146 to 148.

    boards/arm/s32k1xx/s32k148evb:  Initial S32K148EVB.  Initial commit is just  clone of S32K146EVB with file name changes
2019-08-20 17:02:29 -06:00
Gregory Nutt
39d1a02c6d This commit adds support for the S32K146EVB
Squashed commit of the following:

    s32k1xx/s32k146evb/scripts/flash.ld:  Update the linker script for the S32K146.
    boards/:  Hook the S32K146EVB into the configuration and build system.
    s32k146_clockconfig.c:  Add S32K146 clock configuration.
    boards/arm/s32k1xx/s32k146evb/src/s32k146_periphclocks.c:  Update peripheral clocking for the S32K146.
    arm/s32k1xx/s32k146evb:  Initial support fo S32K146EVB.  Starting point is just the S32K118EVB with name changes.
2019-08-19 09:14:14 -06:00
Gregory Nutt
8987a9e374 This commit adds initial board support for the NXP S32K118EVB. This configuration is intended, initially, to support development of the architecture support. This is VERY much a work in progress and you should not use this configuration unless you are interested in assisting with the bring-up.
Squashed commit of the following:

    boards/arm/s32k1xx/s32k118evb/configs/nsh:  Add a basic NSH configuration.
    boards/arm/s32k1xx/s32k118evb/scripts:  Add linker scripts and Make.defs.
    configs/:  Hook the S32K118EVB board into the configuration system.
    boards/arm/s32k1xx/s32k118evb:  Add initial support for the NXP S32K118EVB.
2019-08-14 08:47:35 -06:00
Alin Jerpelea
1358e829ad Merged in alinjerpelea/nuttx (pull request #967)
group boards based on chip

* a1x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* am335x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* scx56xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dm320: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imx6: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kinetis: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kl: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc17xx_40xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc214x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc2378: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc31xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc43xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc54xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max326xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxart: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nuc1xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam34: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd2l2: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd5e5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f0l0g0: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32h7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* str71x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tiva: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: typo fix

    this boars is a z80 board and was moved to the wrong arch

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at32uc3: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at90usb: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: atmega: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: mcs92s12ne64: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mz: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: lm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: mor1kx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: m32262f8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: sh7032: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: gap8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: nr5m100: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: sim: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: qemu: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: esp32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: z16f2811: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: ez80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z180: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: update tools for boards based on chip

    This patch updates only the linux tools

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl25z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl26z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcb1700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-evb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same71-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-1152re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzou: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f071rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c123g-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c1294-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: typo fix

    add missing tools/oocd.sh

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-07 20:49:39 +00:00
Alin Jerpelea
af28821c77 Merged in alinjerpelea/nuttx (pull request #966)
group boards by architecture

* z80: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risc-v: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: group boards by architecture

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-06 14:37:27 +00:00
Alin Jerpelea
a1c991d921 Merged in alinjerpelea/nuttx (pull request #963)
Move boards to boards folder

* boards: rename configs folder to boards

    This is the proposed layout after the change:

    boards: - folder containing board folders
            <board>: - name of each board
                    drivers: - extra drivers specific for platform
                    include: - header files for the boars
                    scripts: - extra scripts specific for platform
                        src: - board specific code
                      tools: - extra tools specific for platform
                    <config>: - board specific configuration(s)

    Note:
    <xxx> names are dependent on platform

    This is a logical change to aim to the arch layout but this is a
    huge change it should be done in several steps to lower the risk.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Kconfig: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile.*: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Make.defs: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .sh: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .mk: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .c & .h: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .bat: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 12:04:14 +00:00