Mateusz Szafoni
b9a1969122
*Merged in raiden00/nuttx_pe (pull request #778 )
...
Improvements in STM32 ADC
arch/arm/src/stm32/stm32_adc.c: start conversion on startup is now possible if TIM triggering selected. This can be useful to start ADC TIM conversion for ADC IPv2 when opening ADC device.
arch/arm/src/stm32/stm32_adc.c: fix compilation errors for chips with one ADV TIM
configs/nucleo-f303re: refresh ADC example
configs/nucleo-f334r8: refresh ADC example
Approved-by: GregoryN <gnutt@nuttx.org>
2018-12-09 00:09:01 +00:00
Gregory Nutt
3810f9e942
Remove configurations using canutils/libuavcan and examples/uavcan. libuavcan has not built for a year or so. The basic problem is that as NuttX advances, the old frozen versino of libuavcan has become absolute because it violates the portable POSIX OS interface. No one is maintaining the port so there is no alternative but to remove it.
2018-03-23 07:37:49 -06:00
Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Alan Carvalho de Assis
853d332b6c
Move CAN subsystem to its own directory and put device drivers there
...
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
2017-05-12 11:48:47 -03:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Sebastien Lorquet
aca2e36d67
stm32 devboards
2017-04-28 18:26:05 +02:00
Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Gregory Nutt
35dfe25430
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
2016-12-06 08:51:37 -06:00
Gregory Nutt
ee2852f5ff
Remove all references to board_adc_setup()
2016-12-05 17:06:08 -06:00
Gregory Nutt
b999e63c82
Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more.
2016-12-05 13:54:12 -06:00
Gregory Nutt
8bd8ab1a45
configs/nucleo_f303re: Various fixes to get the adc configuration building again after PR. Refresh all configurations.
2016-11-04 06:59:28 -06:00
Marc Rechte
483f012600
Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.
2016-10-25 14:14:10 -06:00
Gregory Nutt
1b9b3a7b47
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425
can.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:38:36 -06:00
Gregory Nutt
03cbe671ad
Centralize definitions associated with CONFIG_DEBUG_PWM
2016-06-15 17:23:56 -06:00
Gregory Nutt
63b1eb09e6
Centralize definitions associated with CONFIG_DEBUG_CAN
2016-06-15 15:45:27 -06:00
Gregory Nutt
2ddd57c674
Centralize definitions associated with CONFIG_DEBUG_LEDS
2016-06-15 14:12:19 -06:00
Gregory Nutt
24c51ec1ff
Centralize definitions associated with CONFIG_DEBUG_LCD
2016-06-15 11:40:33 -06:00
Gregory Nutt
ba03134bed
Centralize definitions associated with CONFIG_DEBUG_SPI
2016-06-15 10:41:13 -06:00
Gregory Nutt
b9aadf7242
configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-13 08:45:54 -06:00
Gregory Nutt
b0458e36da
configs/: Remove references to non-existent SPI_VERBOSE setting
2016-06-12 17:57:12 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Paul A. Patience
5cc2fba418
libuavcan: Forgot to change define
2016-05-26 11:11:09 -04:00
Gregory Nutt
4b3e710af6
Add an argument to board_app_initialize()
2016-05-24 10:51:22 -06:00
Paul A. Patience
4703dffb94
Nucleo F303RE: Rename ADC pins
2016-03-01 09:52:25 -05:00
Gregory Nutt
2055f34ee6
Change some names to conform to naming standard
2016-02-23 07:18:08 -06:00
Gregory Nutt
9f2a839ac3
For STM32 boards, rename up_spiinitialize to stm32_spibus_initialize
2016-01-26 12:21:39 -06:00
Gregory Nutt
f4213873f3
board_uniqueid should return a negated errno value on failure
2015-11-19 10:23:01 -06:00
Marwan Ragab
fb0145d0c8
added unique id implementation for nucleo-f303re
2015-11-19 11:11:12 -05:00
Gregory Nutt
5937f9930d
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
2015-11-17 16:53:49 -06:00
Wail Khemir
540a3b701a
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 17:09:10 -05:00
Paul A. Patience
9cd90f3e6e
Nucleo F303RE: Move C++ initialization from configs to apps/platform
2015-11-12 12:10:27 -05:00
Paul A. Patience
f9ef91d180
Nucleo F303RE: Add ADC
2015-11-05 10:17:15 -05:00
Gregory Nutt
8b9cbc05f6
Merged in paulpatience/nuttx-boards/nucleo_f303re_pwm (pull request #13 )
...
Nucleo F303RE: Add PWM
2015-11-01 16:53:14 -06:00
Paul A. Patience
ae748393ce
Nucleo F303RE: Add PWM
2015-11-01 17:13:03 -05:00
Gregory Nutt
b28bd72a48
Standardize naming of user LEDs interface functions
2015-11-01 12:45:58 -06:00
Gregory Nutt
893bd9c7b5
Rename board_led_off to board_autoled_off
2015-11-01 09:10:08 -06:00
Gregory Nutt
78f19bbefb
Rename board_led_on to board_autoled_on
2015-11-01 09:07:36 -06:00
Gregory Nutt
88c506d843
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:03:01 -06:00
Paul A. Patience
dd468add8a
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in stm32_boardinitialize() instead of in board_app_initialize()
2015-10-08 13:18:32 -04:00
Paul A. Patience
06a88178af
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize
2015-10-06 23:49:28 -04:00
