Gregory Nutt
|
8db5d403ee
|
SAM3U-EK board now runs at 96MHz
|
2013-06-17 08:41:52 -06:00 |
|
Gregory Nutt
|
c9f1d1857c
|
SAM3U-EK: Correct polarity of the PENIRQ signal
|
2013-06-16 14:31:18 -06:00 |
|
Gregory Nutt
|
c7fd7a4e27
|
Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver
|
2013-06-16 10:09:21 -06:00 |
|
Gregory Nutt
|
44fe999aea
|
Add support for the SAM4L Xplained Pro I/O1 module
|
2013-06-15 10:56:08 -06:00 |
|
Gregory Nutt
|
b1afe69591
|
Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files
|
2013-06-14 08:54:24 -06:00 |
|
Gregory Nutt
|
8ed39d9f29
|
SAM3/4S GPIO interrupt changes
|
2013-06-13 18:53:14 -06:00 |
|
Gregory Nutt
|
9cf942bcb2
|
SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away
|
2013-06-13 16:18:25 -06:00 |
|
Gregory Nutt
|
e26381f0c0
|
SAM3/4: Some minor design improvements to the SAM3/4 serial driver
|
2013-06-13 15:16:52 -06:00 |
|
Gregory Nutt
|
3a351b60e1
|
Fix error in AT91SAM SPI driver introduced in recent comment. Varioius improvements to README files and debug output
|
2013-06-13 13:38:31 -06:00 |
|
Gregory Nutt
|
1f056e3826
|
Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors
|
2013-06-13 11:04:18 -06:00 |
|
Gregory Nutt
|
507bacc6d5
|
Correct border colors for SAM3U-EK border; clean up some comments; make sure that sam_vectors.S is identical to stam32_vectors.S
|
2013-06-12 19:42:39 -06:00 |
|
Gregory Nutt
|
83ecc03d17
|
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
|
2013-06-12 17:32:00 -06:00 |
|
Gregory Nutt
|
d9cec43398
|
Correct SAM3S-Xplained load address, FLASH wait states, and UART1 pin configuration
|
2013-06-12 08:18:42 -06:00 |
|
Gregory Nutt
|
1ca5db1ebc
|
Changes for a clean build of configs/sam4s-xplained
|
2013-06-11 17:33:43 -06:00 |
|
Gregory Nutt
|
94a2776337
|
Add configs/sam4s-xplained
|
2013-06-11 16:29:59 -06:00 |
|
Gregory Nutt
|
ce8b9c0d3c
|
SAM4S: GPIO, chip characteristics, peripheral Kconfig
|
2013-06-11 12:28:31 -06:00 |
|
Gregory Nutt
|
bafe910ce4
|
SAM4S: Add memory map and interrupt logic
|
2013-06-10 16:18:47 -06:00 |
|
Gregory Nutt
|
76867c132e
|
Beginning updates of SAM3U header files o include support for the SAM4S: WDT, SUPC, EEFC, MATRIX, and PMC
|
2013-06-10 11:57:37 -06:00 |
|
Gregory Nutt
|
52ce4f84ff
|
Add configs/sam4l-xplained/src/up_userleds.c
|
2013-06-04 16:35:43 -06:00 |
|
Gregory Nutt
|
5f97fb8041
|
Rename sam3u/ architecture directories to sam34/ to include the SAM4L
|
2013-06-02 13:57:22 -06:00 |
|
Gregory Nutt
|
b20b0a1839
|
Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_
|
2013-06-02 13:04:40 -06:00 |
|
Gregory Nutt
|
28c64c90bd
|
Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool
|
2013-06-02 10:33:57 -06:00 |
|
Gregory Nutt
|
4748599a43
|
.dSYM only needs to be in the same .gitignore files as .exe
|
2013-05-30 15:02:04 -06:00 |
|
Gregory Nutt
|
7554d2888e
|
Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files
|
2013-05-30 14:45:31 -06:00 |
|
Gregory Nutt
|
23db0682b7
|
Clone svn:ignore directory atributed to .gitignore files
|
2013-04-04 14:27:29 -06:00 |
|
patacongo
|
82b86f9c4a
|
binfmt_execmodule() calls to sched_releasttcb() was not updated to use the second, thread type parameter
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5779 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-23 19:06:40 +00:00 |
|
patacongo
|
a1344d8a44
|
Rework of kernel build signal dispatch to user-space handlers
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5778 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-23 14:46:02 +00:00 |
|
patacongo
|
eaee3fc423
|
Fix some errors in stm32_allocateheap.c for STM32 F1 and F3 that crept in recently
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5776 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-22 18:26:03 +00:00 |
|
patacongo
|
b3890db5ce
|
Add support for calling to and returning from signal handlers in in user-mode threads
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5750 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-17 00:40:49 +00:00 |
|
patacongo
|
76d1ad21f2
|
Fix bad conditional logic in mkconfig.c; Add user-mode pthread start-up logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5748 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-16 17:37:40 +00:00 |
|
patacongo
|
3e8bfb1fe1
|
Switch to user-mode before starting a new task
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5742 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-14 22:44:06 +00:00 |
|
patacongo
|
d960ca3b8d
|
itoa() from Ryan Sundberg
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5741 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-14 18:30:06 +00:00 |
|
patacongo
|
d64396b44b
|
Rename g_heapbase to g_idle_topstack; Fix kernel build heap allocation which cannot use g_heapbase
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5739 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-14 14:42:52 +00:00 |
|
patacongo
|
14298ad8b8
|
Fixe to kernel build and syscalls.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5738 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-13 17:32:37 +00:00 |
|
patacongo
|
93967f8b7f
|
Fix some ARMv7-M syscall logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5736 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-12 21:53:18 +00:00 |
|
patacongo
|
73ef58fda6
|
A few early fixes in kernel build testing
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5734 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-12 16:02:48 +00:00 |
|
patacongo
|
1549b649a6
|
Reorganize some AT91SAM3U files; Add an NSH kernel build configuration to the WaveSahhare Open1788 board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5732 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-11 20:26:55 +00:00 |
|
patacongo
|
00db9fae42
|
Add MPU support for the LPC17xx family
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5731 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-11 17:51:42 +00:00 |
|
patacongo
|
2433c1461b
|
Remove user_map.h; replace with a header at the beginning of the user-space blob. User work queue no started by os_brinup() on behalf of the application
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5727 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-10 23:42:49 +00:00 |
|
patacongo
|
18ca1965b6
|
AT91SAM3 now supports kernel-mode heap; SAM3U-EK knsh configuration converted to use kconfig-frontends tool
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5726 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-10 19:31:10 +00:00 |
|
patacongo
|
1c52dce216
|
More changes for a kernel-mode allocator (more to be done)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-09 21:12:20 +00:00 |
|
patacongo
|
feca2c077e
|
With these fixes, the kernel build is basically functional (but there is more to be done)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5722 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-09 01:27:42 +00:00 |
|
patacongo
|
f66f0c3d24
|
More kernel build fixes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5716 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-07 14:27:47 +00:00 |
|
patacongo
|
c74bef7053
|
More LPC1788 changes from Rommel Marcelo + a few kernel build fixes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5715 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-07 01:52:30 +00:00 |
|
patacongo
|
466efbd35c
|
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-06 19:56:32 +00:00 |
|
patacongo
|
e6298a7a4c
|
Fix NuTiny-SDK-NUC120 LEDs
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5679 42af7a65-404d-4744-a932-0658087f49c3
|
2013-02-27 15:16:46 +00:00 |
|
patacongo
|
e0e0006bc9
|
Set stdio buffer sizes to 0 or 64. No need for 256 or 1024 stdio buffers
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5604 42af7a65-404d-4744-a932-0658087f49c3
|
2013-02-03 17:47:03 +00:00 |
|
patacongo
|
30a0cdf33e
|
Correct a memory leak in NSH
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5600 42af7a65-404d-4744-a932-0658087f49c3
|
2013-02-02 23:56:54 +00:00 |
|
patacongo
|
ad430fc198
|
Add syslog.h; rename lib_rawprintf() to syslog()
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-28 21:55:16 +00:00 |
|
patacongo
|
86e99bb6cf
|
Add a binary 'loader' so that builtin applications can be executed from the BINFS file system
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5525 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-16 19:08:23 +00:00 |
|
patacongo
|
a5fbf66049
|
Don't build drivers/mtd unless CONFIG_MTD is defined (Denis Carikli)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5519 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-15 00:03:58 +00:00 |
|
patacongo
|
3f0b723b7c
|
Fix a *critical* bug in the task exit logic. Implements SIGCHILD
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5513 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-12 19:58:45 +00:00 |
|
patacongo
|
141d541cb8
|
Add tools/link.bat, unlink.bat, and copydir.bat
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5419 42af7a65-404d-4744-a932-0658087f49c3
|
2012-12-08 16:37:43 +00:00 |
|
patacongo
|
64e00aa972
|
Big refactoring of toolchain definitions by Mike Smith
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5379 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-21 18:34:10 +00:00 |
|
patacongo
|
469ec154c0
|
Missing comma in EVERY DELFILE/DELDIR macro call in every Makefile
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5373 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-20 15:47:41 +00:00 |
|
patacongo
|
92cc274d33
|
Fix typo introduced into many Makefiles with last changes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5370 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-19 19:53:53 +00:00 |
|
patacongo
|
87ca1176ed
|
Finishes all Makefile file changes for Windows native clean
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5368 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-17 20:44:02 +00:00 |
|
patacongo
|
2f5eab1892
|
More changes for Mike
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5357 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-15 18:33:18 +00:00 |
|
patacongo
|
f751d36eee
|
Move some (hopefully) un-necessary quotes in Makefiles for Mike
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5356 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-15 17:43:29 +00:00 |
|
patacongo
|
0b27df8f5c
|
Mostly cosmetic changes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5344 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-13 15:50:38 +00:00 |
|
patacongo
|
8f47445bd5
|
Add tools/mkdeps.bat and tools/mkdeps.c
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5342 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-13 00:38:59 +00:00 |
|
patacongo
|
3d2879fc4e
|
Partial change: Removing bash ARCHIVE loop
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5335 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-11 15:42:12 +00:00 |
|
patacongo
|
2c1ccb79e3
|
Convert configs/stm32f4discovery/nxlines to use Kconfig tool
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5320 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-07 23:55:49 +00:00 |
|
patacongo
|
8b5fb4c1f6
|
Patch to removed MMCSD NSLOTS warning from Freddie Chopin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5316 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-06 14:57:01 +00:00 |
|
patacongo
|
34344abd32
|
Massive clean-up of linker scripts from Freddie Chopin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5307 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-04 17:18:25 +00:00 |
|
patacongo
|
918e70fe8e
|
Part I of port of Rhombus math library
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5269 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-28 14:31:57 +00:00 |
|
patacongo
|
d66c15fd74
|
Document problem with GCC 4.8.3 and the NXFLAT tools
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5228 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-10 19:58:57 +00:00 |
|
patacongo
|
d52a9c74e7
|
Rename gnu-nxflat.ld to gnu-nxflat-gotoff.ld; Add gnu-nxflat-pcrel.ld
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5225 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-10 17:01:23 +00:00 |
|
patacongo
|
b0902ab3b5
|
Change the default path to the buildroot bin/ directory in all setenv.sh files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5222 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-10 12:56:02 +00:00 |
|
patacongo
|
84157013ea
|
All Cortex-M Make.defs files updated to use buildroot EABI toolchain if BUILDROOT=y selected
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5219 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-06 18:09:05 +00:00 |
|
patacongo
|
e9ad8b49f8
|
Update all config README.txt files to show that they use the EABI buildroot toolchain
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5218 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-06 17:29:36 +00:00 |
|
patacongo
|
1d1f34b3d0
|
Add buildroot support for binutils-2.22 and gcc-4.6.3; all buildroot tools are not called abc-nuttx-elf instead of abc-elf
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5213 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-05 23:01:51 +00:00 |
|
patacongo
|
279fc93c4e
|
Change all occurrences of CONFIG_EXAMPLE_ to CONFIG_EXAMPLES_ for consistency; fleshed out a few more Kconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5211 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-04 17:36:07 +00:00 |
|
patacongo
|
7f9ed0d7bb
|
Refactor common make definitions to tools/Config.mk; Add verbosity option to build (Richard Cochran)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5160 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-18 14:06:57 +00:00 |
|
patacongo
|
2d69ae54b1
|
Upate some pathes for the new NuttX repository
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5156 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-17 19:33:42 +00:00 |
|
patacongo
|
7a2692df6a
|
Resync new repository with old repo r5166
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-17 18:35:37 +00:00 |
|
patacongo
|
50321df42d
|
Remove executable property from source and make files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5146 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 18:46:10 +00:00 |
|
patacongo
|
7a9457bb07
|
Email address change in nuttx/
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 18:32:24 +00:00 |
|
patacongo
|
a93d7eb69e
|
Shenzhou board is first to use ONLY Kconfig for configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5114 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 13:56:21 +00:00 |
|
patacongo
|
f39a3c9417
|
Remove several unused configuration values
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5113 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 04:29:48 +00:00 |
|
patacongo
|
3eae5ef842
|
Kconfig: Standardize board LED and button configurations
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5112 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 03:31:46 +00:00 |
|
patacongo
|
d2ef49c64e
|
More Shenzhou board logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5111 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 02:10:56 +00:00 |
|
patacongo
|
59588247bf
|
Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 15:28:56 +00:00 |
|
patacongo
|
17e0c5198e
|
Changes to Kconfig and matching defconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5085 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 14:43:56 +00:00 |
|
patacongo
|
435dbaacd8
|
Add configurable application entry point
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5070 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-30 20:13:50 +00:00 |
|
patacongo
|
4509f0cb05
|
Remove documentation from defconfig files so that they are more maintainable
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5068 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-30 15:44:02 +00:00 |
|
patacongo
|
d164b69d94
|
The USB host driver has been verified on the STM32F4Discovery
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5067 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-29 19:38:53 +00:00 |
|
patacongo
|
5e08e5650f
|
Dequote Kconfig strings that may be used as components of a path
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5057 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-27 14:07:17 +00:00 |
|
patacongo
|
05d687e9eb
|
Lots of defconfig changes for compatibility with the configuration tool
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5050 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-23 22:46:36 +00:00 |
|
patacongo
|
b8a19e310e
|
CONFIG_DRAM_END configuration change from Richard Cochran
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5038 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-20 12:44:15 +00:00 |
|
patacongo
|
c91aa007f2
|
Review and update some board configurations
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4991 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-29 18:30:48 +00:00 |
|
patacongo
|
834af0f5fb
|
NxWM: Finishes touchscreen implementation; NuttX: Standardize touchscreen initialization interfaces for all boards
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4721 42af7a65-404d-4744-a932-0658087f49c3
|
2012-05-11 00:05:25 +00:00 |
|
patacongo
|
0d6f095e1c
|
Integrate the STMPE11 driver into the STM3240G-EVAL board logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4714 42af7a65-404d-4744-a932-0658087f49c3
|
2012-05-08 15:07:53 +00:00 |
|
patacongo
|
c649e981d3
|
Turn PIC32MXMMB backlight off
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4653 42af7a65-404d-4744-a932-0658087f49c3
|
2012-04-25 02:10:42 +00:00 |
|
patacongo
|
11d16b5830
|
Kconfig updated + NFS update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4646 42af7a65-404d-4744-a932-0658087f49c3
|
2012-04-23 19:55:32 +00:00 |
|
patacongo
|
e45c3b97b3
|
Kconfig update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4597 42af7a65-404d-4744-a932-0658087f49c3
|
2012-04-12 21:52:04 +00:00 |
|
patacongo
|
330b89ca0e
|
Add kconfig documentation
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
|
2012-04-06 16:45:52 +00:00 |
|
patacongo
|
cc72319c3f
|
Adding skeleton Kconfig files (part 2 of 2)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4565 42af7a65-404d-4744-a932-0658087f49c3
|
2012-04-06 15:58:25 +00:00 |
|
patacongo
|
147d02cc24
|
Add support for the Atollic Pro toolchain; Change extension .ihx to .hex to be better compatible with most of the rest of the world
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4431 42af7a65-404d-4744-a932-0658087f49c3
|
2012-02-27 19:50:35 +00:00 |
|
patacongo
|
1ccaed1ab4
|
NSH now uses the new Telnet daemon and built-in tasks started by NSH can be used over Telnet
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4361 42af7a65-404d-4744-a932-0658087f49c3
|
2012-02-02 16:04:09 +00:00 |
|