In SMP mode, up_cpu_index()/this_cpu() are the same, both return the index of the physical core.
In AMP mode, up_cpu_index() will return the index of the physical core, and this_cpu() will always return 0
| #ifdef CONFIG_SMP
| # define this_cpu() up_cpu_index()
| #elif defined(CONFIG_AMP)
| # define this_cpu() (0)
| #else
| # define this_cpu() (0)
| #endif
Signed-off-by: chao an <anchao@lixiang.com>
The overhead of spinlok is less than mutext (mutex need to call
enter_critical section.)
After this patch, `down_write_trylock` and `down_read_trylock` can be
use in interrupt context.
The instruction is protected with mutex only one instruction so using
spinlock is better.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
1. add support to join main task
| static pthread_t self;
|
| static void *join_task(void *arg)
| {
| int ret;
| ret = pthread_join(self, NULL); <--- /* Fix Task could not be joined */
| return NULL;
| }
|
| int main(int argc, char *argv[])
| {
| pthread_t thread;
|
| self = pthread_self();
|
| pthread_create(&thread, NULL, join_task, NULL);
| sleep(1);
|
| pthread_exit(NULL);
| return 0;
| }
2. Detach active thread will not alloc for additional join, just update the task flag.
3. Remove the return value waiting lock logic (data_sem),
the return value will be stored in the waiting tcb.
4. Revise the return value of pthread_join(), consistent with linux
e.g:
Joining a detached and canceled thread should return EINVAL, not ESRCH
https://pubs.opengroup.org/onlinepubs/009695399/functions/pthread_join.html
[EINVAL]
The value specified by thread does not refer to a joinable thread.
NOTE:
This PR will not increase stack usage, but struct tcb_s will increase 32 bytes.
Signed-off-by: chao an <anchao@lixiang.com>
The delete flag is not synchronized with the life cycle of the group,
if the flag set before waitpid(), the tcb will be mistakenly deleted
by group_del_waiter(), use-after-free will happen.
Regression by:
| commit 29e50ffa73 (origin/master, origin/HEAD)
| Author: chao an <anchao@lixiang.com>
| Date: Mon Mar 4 09:19:27 2024 +0800
|
| sched/group: move task group into task_tcb_s to improve performance
|
| move task group into task_tcb_s to avoid access allocator to improve performance
|
| for Task Termination, the time consumption will be reduced ~2us (Tricore TC397 300MHZ):
| 15.97(us) -> 13.55(us)
|
| Signed-off-by: chao an <anchao@lixiang.com>
Signed-off-by: chao an <anchao@lixiang.com>
move task group into task_tcb_s to avoid access allocator to improve performance
for Task Termination, the time consumption will be reduced ~2us (Tricore TC397 300MHZ):
15.97(us) -> 13.55(us)
Signed-off-by: chao an <anchao@lixiang.com>
Skip the child wait if here is only self in member list,
since the members of the task group should be 1 if task exit.
Fix Regression issue that the task could not terminate normally.
Signed-off-by: chao an <anchao@lixiang.com>
Change the type of task group member to single list chain to
avoid accessing the memory allocator to improve the performance
Signed-off-by: chao an <anchao@lixiang.com>
The maximum startup parameters have been checked accordingly in nxtask_setup_stackargs(),
let us save argument counter to avoid limit check.
Signed-off-by: chao an <anchao@lixiang.com>
Task group could find from process id, replace group_findbypid to
task_getgroup to simplify the search logic
Signed-off-by: chao an <anchao@lixiang.com>
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
Add support for static tcb, applications in some special case can
initialize system resources in advance through static tcb.
| static struct task_tcb_s g_tcb;
|
| memset(&g_tcb, 0, sizeof(struct task_tcb_s));
| g_tcb.cmn.flags = TCB_FLAG_TTYPE_KERNEL;
| nxtask_init(&g_tcb, "PTCB", 101, NULL, 1024, ptcb_task, NULL, NULL, NULL);
|
| ...
| nxtask_activate(&g_tcb.cmn);
Signed-off-by: chao an <anchao@lixiang.com>
Recursive:
25 0x44000e5a in up_cpu_paused (cpu=cpu@entry=1) at armv7-a/arm_cpupause.c:120
26 0x440032f2 in enter_critical_section () at irq/irq_csection.c:275
27 0x44006f24 in nxsched_process_taskload_ticks (tcb=tcb@entry=0x442ba638 <g_idletcb+256>, ticks=0) at sched/sched_cpuload.c:104
28 0x44007310 in nxsched_suspend_critmon (tcb=tcb@entry=0x442ba638 <g_idletcb+256>) at sched/sched_critmonitor.c:303
29 0x44006ef0 in nxsched_suspend_scheduler (tcb=tcb@entry=0x442ba638 <g_idletcb+256>) at sched/sched_suspendscheduler.c:78
30 0x44000e5a in up_cpu_paused (cpu=cpu@entry=1) at armv7-a/arm_cpupause.c:120
31 0x440032f2 in enter_critical_section () at irq/irq_csection.c:275
32 0x44000f1a in arm_pause_handler (irq=<optimized out>, context=<optimized out>, arg=<optimized out>) at armv7-a/arm_cpupause.c:216
33 0x44002ffe in irq_dispatch (irq=irq@entry=2, context=context@entry=0x4449f6b8 <g_cpu1_idlestack+1720>) at irq/irq_dispatch.c:146
34 0x44001612 in arm_doirq (irq=2, irq@entry=0, regs=0x4449f6b8 <g_cpu1_idlestack+1720>) at armv7-a/arm_doirq.c:72
35 0x44000940 in arm_decodeirq (regs=<optimized out>) at armv7-a/arm_gicv2.c:403
36 0x440000b4 in arm_vectorirq () at armv7-a/arm_vectors.S:236
Signed-off-by: ligd <liguiding1@xiaomi.com>
cpu0 thread0: cpu1:
sched_yield()
nxsched_set_priority()
nxsched_running_setpriority()
nxsched_reprioritize_rtr()
nxsched_add_readytorun()
up_cpu_pause()
IRQ enter
arm64_pause_handler()
enter_critical_section() begin
up_cpu_paused() pick thread0
arm64_restorestate() set thread0 tcb->xcp.regs to CURRENT_REGS
up_switch_context()
thread0 -> thread1
arm64_syscall()
case SYS_switch_context
change thread0 tcb->xcp.regs
restore_critical_section()
enter_critical_section() done
leave_critical_section()
IRQ leave with restore CURRENT_REGS
ERROR !!!
Reason:
As descript above, cpu0 swith task: thread0 -> thread1, and the
syscall() execute slowly, this time cpu1 pick thread0 to run at
up_cpu_paused(). Then cpu0 syscall execute, cpu1 IRQ leave error.
Resolve:
Move arm64_restorestate() after enter_critical_section() done
This is a continued fix with:
https://github.com/apache/nuttx/pull/6833
Signed-off-by: ligd <liguiding1@xiaomi.com>
These variables will trigger variable 'ret' set but not used warnings due to different configurations.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Task activation/exit logs are helpful for device bringup,
especially when user space nsh prompt doesn't show up.
Putting them here will allow cleaning of logs in multiple
up_exit() functions later.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Usually the startup script is placed under /etc. The contents of the etc directory
are compiled and linked with Nuttx binary in the form of romfs. After startup,
it will be mounted by Nsh.
etc is generated by the different boards, that use genromfs and xxd tools to generate
and compile it into the Nuttx, for example: boards/arm/at32/at32f437-mini/tool/mkromfs.sh
The more common method is etc image generated from the content in the corresponding
board/arch/board/board/src/etc directory, and added by Makefile for example:
boards/sim/sim/sim/src/etc.
But in kernel/protected mode, Nuttx kernel and apps are run in different privileged/
non-privileged mode or the isolated binarys, so as that nsh should use syscall to
access Nuttx kernel by exported API. In this scenario, nsh can not mount the etc image
content, because that is generated in board and as a part of Nuttx kernel.
changes:
- move etc romfs mount from nsh to Nuttx, but keep the script to parse and execute.
- move and rename the related CONFIG, move customized nsh_romfsimg.h to etc_romfs.c
in boards, and no need declaration for romfs_img/romfs_img_len.
This commit changes and updates all configurations in Nuttx arch/board as much as possible,
but if any missing, please refer to the following simple guide:
- rename CONFIG_NSH_ROMFSETC to CONFIG_ETC_ROMFS, and delete CONFIG_NSH_ARCHROMFS in defconfig
- rename the etc romfs mount configs, for example CONFIG_NSH_FATDEVNO to CONFIG_ETC_FATDEVNO
- move customized nsh_romfsimg.h to etc_romfs.c in board/arch/board/board/src and no need
declaration for romfs_img/romfs_img_len.
- delete default nsh_romfsimg.h, if ROMFSETC is enabled, should generate and compile etc_romfs.c
in board/arch/board/board/src.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Remove KEEP_ALIVE_HACK to avoid waking up the device periodly.
The workaround it's added by:
commit 6546fa39c7
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Aug 12 11:12:00 2014 -0600
Tickless Stuff: Back out the risky timer operations when the ready-to-run
list is modified. That is unsafe. An ugly workaround is just to keep an
interval timer going all of the time with a minimum duration equal to the
timeslice interval.
But look like it doesn't needed anymore.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Usage:
1. CONFIG_FS_PROCFS_MAX_STACK_RECORD > 0, such as 32,
2. add '-finstrument-functions' to CFLAGS for What you want to check
stack.
3. mount porcfs
4. cat /proc/<pid>/stack will print backtace & size
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
If the gap between sp and stack_top is too small,
then the stack will not be output,
modify the conditional loop condition, and fix this problem
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
A new locking mechanism: read/write locks
When there is a writer it is not possible to put on a read lock or a write lock; when there is a reader it is possible to reenter the read lock but not the write lock.
Writers are exclusive locks, readers are shared locks.
At the same time through the waiter count to determine whether there is currently a blocked task, if there is then in the unlock time to wake up all the waiter, through the priority of the competition to complete the blocked lock execution.
For example:
When we have a reader blocking two waiter writers, when the reader is unlocked it wakes up both writers. The writer with higher priority wakes up and checks for a successful condition and locks the lock, the second writer wakes up and fails to check for a condition and continues to block the lock.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
This moves all the public POSIX semaphore functions into libc and with
this most of the user-space logic is also moved; namely cancel point and
errno handling.
This also removes the need for the _SEM_XX macros used to differentiate
which API is used per user-/kernel mode. Such macros are henceforth
unnecessary.
PR #11165 causes an unnecessary regression; task_delete no longer works,
if the deleted task is from another group.
The logic that prevents this comes from:
nxnotify_cancellation() ->
tls_get_info_pid() ->
nxsched_get_stackinfo()
Which checks for permissions, which does not make sense in this case since
it is the kernel asking for the stack information.
Fix this by partially reverting 11165 and implementing a direct path for
the kernel to query for any tasks TLS.
Commit 9244b5a737 added support
for non-standard field si_user that is useful for passing context
pointers to signal handlers.
This commits makes it work for all signals, not just SA_KERNELHAND.
Previously si_user for normal signals was uninitialized garbage.
The task files should consult the "spawn action" and "O_CLOEXEC flags"
to determine further whether the file should be duplicated.
This PR will further optimize file list duplicating to avoid the performance
regression caused by additional file operations.
Signed-off-by: chao an <anchao@xiaomi.com>
This moves task / thread cancel point logic from the NuttX kernel into
libc, while the data needed by the cancel point logic is moved to TLS.
The change is an enabler to move user-space APIs to libc as well, for
a coherent user/kernel separation.
Some assertions in extreme cases will cause syslog to be unable to
output logs normally, so this PR will restore the input registers
into the array of last registers to ensure that we can also obtain
some important informations.
Signed-off-by: chao an <anchao@xiaomi.com>
If the semaphore is shared, the holder has put its own mmapped address
to pholder->sem. This means we must switch to the holder's address
environment when going through the held semaphores list.
A better option would be to get the kernel mapped address for the
semaphore's physical page, but that mechanism is not functional yet.
This fixes a full system crash when CONFIG_PRIORITY_INHERITANCE=y and
CONFIG_BUILD_KERNEL=y and user makes shared semaphore via:
int semfd = shm_open("sem", O_CREAT | O_RDWR, 0666);
sem_t *sem = mmap(0, sizeof(sem_t), PROT_READ | PROT_WRITE, MAP_SHARED, semfd, 0);
Previous adjtime() implementation was limited to adjusting system
timer tick period. This commit reimplements the internals to use
a kernel watchdog timer. Platform-independent part of the code now
works also for adjusting hires RTC and tickless timer rate.
User code facing API is unchanged. Architecture code API has changed:
up_adj_timer_period() is replaced by up_adjtime().
Other improvements:
- Support query of remaining adjustment by passing NULL to first
argument of adjtime(). This matches Linux behavior.
- Improve resolution available for architecture driver, previously
limited to 1 microsecond per tick. Now 1 nanosecond per second.
Set the newly spawned process's signal mask, if the caller has instructed
to do so by setting POSIX_SPAWN_SETSIGMASK.
This is called after the task has been created but has NOT been started
yet.
Like the name implies, it is supposed to set the spawn attributes for
the NuttX specific "spawn proxy task" which was historically used as
a proxy to spawn new tasks. The proxy handled file actions and the signal
mask which are inherited from the parent.
The proxy task does not exist anymore, thus the proxy task attributes
do not need to be set anymore either.
Also, the function is currently still used, but the signal mask is set
for the spawning process, not the proxy process, and this is most
DEFINITELY an error (as the spawning process's signal mask changes
unexpectedly).
Setting the signal mask for the newly spawned process is simple, just
set it directly, if instructed to do so. This will be done in a later
patch!
VELAPLATFO-18473
refs:
https://man7.org/linux/man-pages/man2/fcntl.2.html
If the FD_CLOEXEC bit is set, the file descriptor will automatically
be closed during a successful execve(2).
(If the execve(2) fails, the file descriptor is left open.)
modify:
1. Ensure that the child task copies all fds of the parent task,
including those with O_CLOEXE.
2. Make sure spawn_file_action is executed under fd with O_CLOEXEC,
otherwise it will fail.
3. When a new task is activated or exec is called, close all fds
with O_CLOEXEC flags.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
modlib/modlib_symbols.c: In function ‘modlib_symcallback’:
modlib/modlib_symbols.c:215:13: warning: implicit declaration of function ‘modlib_depend’; did you mean ‘modlib_read’? [-Wimplicit-function-declaration]
215 | ret = modlib_depend(exportinfo->modp, modp);
| ^~~~~~~~~~~~~
| modlib_read
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Handle task spawn attributes as task spawn file actions are handled.
Why? This removes the need for sched_lock() when the task is being
spawned. When loading the new task from a file the scheduler can be
locked for a VERY LONG time, in the order of hundreds of milliseconds!
This is unacceptable for real time operation.
Also fixes a latent bug in exec_module, spawn_file_actions is executed
at a bad location; when CONFIG_ARCH_ADDRENV=y actions will point to the
new process's address environment (as it is temporarily instantiated at
that point). Fix this by moving it to after addrenv_restore.
This commit adds support for custom stream via fopencookie function.
The function allows the programmer the create his own custom stream
for IO operations and hook his custom functions to it.
This is a non POSIX interface defined in Standard C library and implemented
according to it. The only difference is in usage of off_t instead of
off64_t. Programmer can use 64 bits offset if CONFIG_FS_LARGEFILE is
enabled. In that case off_t is defined as int64_t (int32_t otherwise).
Field fs_fd is removed from file_struct and fs_cookie is used instead
as a shared variable for file descriptor or user defined cookie.
The interface will be useful for future fmemopen implementation.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Exit immediately when finished processing the current CPU
if there are no other CPUs to be processed.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Support smp function call, calling smp_call_function allows
a specific core to execute a function. It should be noted
that there should be no waiting operations in the executed
function.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
both functions aren't suitable to be put into libc,
because they call the kernel internal functions directly.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This path just for modify Mac sim-02 issue.
The compiler require the firt paramter of atomic_compare_exchange_strong
is atomic type and second parameter is int type.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
spinlock.c:
Implement read write spinlock.
Readers can take lock simultaneously but only one writer can take lock.
irq_spinlock.c:
Align g_irq_spin_count.
If the lock is NULL, the caller will get global lock (e.g. g_irq_spin) and spin_lock_irqsave() support nest on the same CPU.
If the CPU can write lock, it can call write_lock_irqsave() again (e.g. support nest).
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
In addition to printing out the thread name (task name in flat mode),
print the parent process's name as well.
It is quite useful to know which process is the parent of a faulting
thread, although this information can be read from the assert dump, in
some cases the dump might be incomplete (due to e.g. stack corruption,
which causes another exception and PANIC().)
test config: ./tools/configure.sh -l qemu-armv8a:nsh_smp
Pass ostest
No matter big-endian or little-endian, ticket spinlock only check the
next and the owner is equal or not.
If they are equal, it means there is a task hold the lock or lock is
free.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Co-authored-by: Xiang Xiao <xiaoxiang781216@gmail.com>
clock_getcycle always returns an incremented cycle value
If the hardware does not support perf event it will use arch_alarm's up_perf_gettime
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1) Previously adjustments less than 1 microsecond per tick would be
completely ignored. Now they are applied over a shorter period at
a rate of 1 us per tick.
2) Previously CLOCK_ADJTIME_PERIOD was in units of 1/100th of second.
Change to milliseconds to be more generally useful unit.
Change setting name to CLOCK_ADJTIME_PERIOD_MS to make the unit change
easier to notice.
3) Previously CLOCK_ADJTIME_SLEWLIMIT was in percentage.
Most clock crystals have better accuracy than 1%, so the minimum slew
rate was excessive. Change to CLOCK_ADJTIME_SLEWLIMIT_PPM with setting
value in parts per million.
4) No need to use floating point math in clock_adjtime.c.
CONFIG_SCHED_CPULOAD_EXTCLK doesn't actually require tickless mode.
As long as the platform provides external call to nxsched_process_cpuload(),
it will work in either tickless or ticking mode.
Removed Kconfig dependency.
Instead, CONFIG_SCHED_CPULOAD_SYSCLK does require ticking mode to work,
as documented in CONFIG_SCHED_CPULOAD help text.
Added the dependency to Kconfig also.
* build-globals.sh
- Only look in the nuttx for external symbols used when loading
dynamic shared objects
* include/elf64.h
- Correct the type of fields in the Elf64_Phdr structure
* libs/libc/dlfcn/lib_dlclose.c
- Distinguish between ET_DYN and other objects as the former
has both text and data in a single allocation to reserve
GOT offsets
* libs/libc/dlfcn/lib_dlopen.c
- Code formatting
* libs/libc/modlib/modlib_bind.c
- Distinguish between relocation entry sizes by section type
- Handle RELA style relocations
* libs/libc/modlib/modlib_globals.S
- Formatting fixes
- Symbols should not be weak - they exist or they don't
* include/nuttx/lib/modlib.h
- Add an inidcator to module_s to distinguish between ET_DYN and other
* libs/libc/modlib/modlib_load.c
- ET_DYN objects need to keep the relative displacement between the text
and data sections due to GOT references from the former to the latter.
This also implies that linking may require modification from the default
for the shared objects being produced. For example, default alignment may
mean nearly 64K of wasted space.
* libs/libc/modlib/modlib_unload.c
sched/module/mod_rmmod.c
- Distingusih between freeing of ET_DYN storage and other as the former
is a single allocation.
* libs/libc/modlib/mod_insmod.c
- Cater for ET_DYN objects having init and preinit sections
bug:
user thread: hpwork:
timer_create() with SIGEV_THREAD
timer_settime()
irq -> work_queue() add nxsig_notification_worker to Q
timer_delete()
nxsig_cancel_notification()
call nxsig_notification_worker()
work_cancel()
timer_free()
nxsig_notification_worker() used after free
root cause:
work_cancel() can't cancel work completely, the worker may alreay be running.
resolve:
use work_cancel_sync() API to cancel the work completely
Signed-off-by: ligd <liguiding1@xiaomi.com>
In the 'wd_timer',the callback function executed by 'wd_expiration' could call wd_start,and g_wdtickbase might be updated.Subsequently, g_wdtickbase is incremented by the value of ticks, causing g_wdtickbase to be greater than the actual passage of time.
Signed-off-by: yangguangcai <yangguangcai@xiaomi.com>
modify the default errno from ENOSYS to EINVAL can pass the ltp
case: ltp_timer_getoverrun_speculative_6_1,
ltp_timer_getoverrun_speculative_6_2, ltp_timer_getoverrun_speculative_6_3
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
aio client will queue asynchronous io requests to the worker threads.
if PRIORITY_INHERITANCE is enabled, client thread's priority will be
set to worker threads. There will be multi-boost/restore of worker
threads' priority and assert the system.
No need priority multi-boot/restore to worker thread because client
thread's priority is alway the same.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
vfork use waitpid hang father process,
but waitpid release child processs information by default.
So when user call wait, it return errno 10.
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
If scheduling occurs in file_fsync,
fl_lock may be released, and an error may
occur when calling nxmutex_unlock
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
To determine whether a signal is real-time signal or standard signal, the POSIX standard https://www.man7.org/linux/man-pages/man7/signal.7.html defines a real-time signal between SIGRTMIN and SIGRTMAX , which can store multiple copies, otherwise only one can be retained.
Signed-off-by: xinhaiteng <xinhaiteng@xiaomi.com>
If we are running on a single CPU architecture, then we know interrupts
are disabled and there is no need to explicitly call enter_critical_section().
However, in the SMP case, enter_critical_section() is required prevent
multiple cpu to enter timer_start.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
core0 may write the data used by other cpu, this will cause cache inconsistency.
so need fulsh dcache before start other cpus.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
We can use the driver in nuttx to download
files with debugger
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
reproduce:
static void *pthread(void *arg)
{
system(arg);
}
void test (int argc, char *argv[])
{
pthread_create(&pthread0, &attr, pthread, argv[1]);
pthread_create(&pthread1, &attr, pthread, argv[2]);
}
only one pthread system() returnd, othres hanged
rootcause:
As we known, system() will create a new task called:
system -c XX
The example:
parent group child groups
pthread0 -> waitpid() -> system -c ps -> exit() -> nxtask_signalparent()
pthread1 -> waitpid() -> system -c ls -> exit() -> nxtask_signalparent()
Each child group exit with function nxtask_signalparent(),
As we expect:
system -c ps will signal pthread0
system -c ls will signal pthread1
But actually:
system -c ps will signal pthread0/1
system -c ls will signal pthread0/1
As the spec, we know, this behavior is normal:
https://man7.org/linux/man-pages/man2/sigwaitinfo.2.html
So for this situation, when the signo is SIGCHLD, we broadcast.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Standard POSIX specification in URL “https://pubs.opengroup.org/onlinepubs/9699919799/functions/mq_timedsend.html” requires that "EBADF" be returned when message queue not opened for writing.So i update the related descriptions in this file, no function changed.
Signed-off-by: yangjiao <yangjiao@xiaomi.com>
Standard POSIX specification in URL “https://pubs.opengroup.org/onlinepubs/9699919799/functions/mq_send.html” requires that "EBADF" be returned when mqdes is not open for writing. And message priorities range from 0 to {MQ_PRIO_MAX}-1. In this change, i update them to follow POSIX spec.
Signed-off-by: yangjiao <yangjiao@xiaomi.com>
In POSIX testcase "open_posix_testsuite/conformance/interfaces/mq_receive/11-2.c", it will return "EPERM" when message queue is not opened for reading, but the standard POSIX specification in URL “https://pubs.opengroup.org/onlinepubs/9699919799/functions/mq_receive.html” requires that "EBADF" be returned.So in this change, i update it.
Signed-off-by: yangjiao <yangjiao@xiaomi.com>
When supporting high-priority interrupts, updating the
g_running_tasks within a high-priority interrupt may be
cause problems. The g_running_tasks should only be updated
when it is determined that a task context switch has occurred.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
fix ltp pthread_cond_wait_1 test question, child should inherit parent
priority by default.
nsh> ltp_pthread_cond_wait_1
Error: the policy or priority not correct
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
The nxspawn_dup2 function will return a value greater than 0,
so the loop should only exit if ret is less than 0.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
pass ltp sigaction case 19-5.c, 23-5,c and 28-5.c.
When SIGCONT is dispatched, resume all members of the task group.
So there is nothing do in default action.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
1. as we can use fork to implement vfork, so we rename the vfork to
fork, and use the fork method as the base to implement vfork method
2. create the vfork function as a libc function based on fork
function
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
A normal user task calls pthread_exit(), will crash at DEBUGASSERT.
Cause pthread_exit limit in user pthread task.
test case:
int main(int argc, FAR char *argv[])
{
pthread_exit(NULL);
return 0;
}
>> test
>> echo $?
>> 0
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
pthread_cond_wait() should be an atomic operation in the mutex lock/unlock.
Since the sched_lock() has been wrongly deleted in the previous commit,
the context switch will occurred after the mutex was unlocked:
--------------------------------------------------------------------
Task1(Priority 100) | Task2(Priority 101)
|
pthread_mutex_lock(mutex); |
| |
pthread_cond_wait(cond, mutex) |
| | |
| | |
| ->enter_critical_section() |
| ->pthread_mutex_give(mutex) | ----> pthread_mutex_lock(mutex); // contex switch to high priority task
| | pthread_cond_signal(cond); // signal before wait
| | <---- pthread_mutex_unlock(mutex); // switch back to original task
| ->pthread_sem_take(cond->sem)| // try to wait the signal, Deadlock.
| ->leave_critical_section() |
|
| ->pthread_mutex_take(mutex) |
| |
pthread_mutex_lock(mutex); |
---------------------------------------------------------------------
This PR will bring back sched_lock()/sched_unlock() to avoid context switch to ensure atomicity
Signed-off-by: chao an <anchao@xiaomi.com>
When asserting, automatically analyze whether
there is a deadlock in the thread, and if there
is a deadlock, print out the deadlocked thread.
The principle is to analyze whether there is
a lock ring through the tcb holder.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
This PR is a modification that optimizes priority inheritance
for only one holder. After the above modifications are completed,
the mutex lock->unlock process that supports priority inheritance
can be optimized by 200 cycles.
Before modify: 2000 cycle
After modify: 1742 cycle
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Fixed ltp_stress_mqueues_multi_send_rev_1 test issue:
In SMP mode, tg_members will operate on different cores.
Adding interrupt locking operations ensures that the operation
of tg_members will not be interrupted by other cores.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Resolving the issue with the ltp_interfaces_pthread_join_6_2 test case.
In SMP mode, the pthread may still be in the process of exiting when
pthread_join returns, and calling pthread_join again at this time will
result in an error. The error code returned should be ESRCH.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
use PTHREAD_CLEANUP_STACKSIZE to enable or disable interfaces pthread_cleanup_push() and pthread_cleanup_pop().
reasons:(1)same as TLS_TASK_NELEM (2)it is no need to use two variables
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
This is preparation to use kernel stack for everything when the user
process enters the kernel. Now the user stack is in use when the user
process runs a system call, which might not be the safest option.
This adds functionality to map pages dynamically into kernel virtual
memory. This allows implementing I/O remap for example, which is a useful
(future) feature.
Now, the first target is to support mapping user pages for the kernel.
Why? There are some userspace structures that might be needed when the
userspace process is not running. Semaphores are one such example. Signals
and the WDT timeout both need access to the user semaphore to work
properly. Even though for this only obtaining the kernel addressable
page pool virtual address is needed, for completeness a procedure is
provided to map several pages.
to avoid the infinite recusive dispatch:
*0 myhandler (signo=27, info=0xf3e38b9c, context=0x0) at ltp/testcases/open_posix_testsuite/conformance/interfaces/sigqueue/7-1.c:39
*1 0x58f1c39e in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:167
*2 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*3 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:115
*4 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:435
*5 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*6 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*7 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*8 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:115
*9 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:435
*10 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*11 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*12 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*13 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:115
*14 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:435
*15 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*16 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*17 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*18 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:115
*19 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:435
*20 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*21 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*22 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*23 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:115
*24 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:435
*25 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*26 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*27 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*28 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:115
*29 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:435
*30 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*31 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signal must be masked when it is delivered to a signal handler per:
https://pubs.opengroup.org/onlinepubs/007904875/functions/sigaction.html:
When a signal is caught by a signal-catching function installed by sigaction(), a new signal mask is calculated and installed for the duration of the signal-catching function (or until a call to either sigprocmask() or sigsuspend() is made). This mask is formed by taking the union of the current signal mask and the value of the sa_mask for the signal being delivered [XSI] [Option Start] unless SA_NODEFER or SA_RESETHAND is set, [Option End] and then including the signal being delivered. If and when the user's signal handler returns normally, the original signal mask is restored.
Any action queued for that signal while the signal is masked should be deferred. It should go into the group pending signal list and should not be processed until until the signal is unmasked (which should occur when the signal handler returns).
https://pubs.opengroup.org/onlinepubs/9699919799/functions/pthread_detach.html
If an implementation detects that the value specified by the thread argument
to pthread_detach() does not refer to a joinable thread, it is recommended
that the function should fail and report an [EINVAL] error.
If an implementation detects use of a thread ID after the end of its lifetime,
it is recommended that the function should fail and report an [ESRCH] error.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
