1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
This commit exends systimer options for nRF52 arch. It is possible
to use ARM SysTick either for tickless or non-tickless mode. Also,
it is possible to use the RTC peripheral for tickless mode. This
also re-enables support for WFI/WFE sleep if RTC is used, since
this counter continues to run in this mode (in contrast to SysTick).
Summary:
- I noticed that ldrex/strex on cxd56xx have an issue
- The issue is still under investigation
- This commit introduces a custom testset to avoid the issue
Impact:
- Affects cxd56xx in SMP mode if it is enabled
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that ostest sometimes stops with DEBUGASSERT
- Finally I found a bug that cpu1 can not disable interrupt
- This commit initializes nvic to fix this bug
Impact:
- Only affects cxd56 in SMP mode
Testing:
- spresense:smp and spresense:wifi_smp with DEBUG_ASSERTIONS=y
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
arch/arm/src/stm32/stm32_lowputc.c:
* stm32_lowsetup(): Ensure the USART is disabled before attempting
to configure it because some register bits cannot be modified
otherwise. This solves an issue that was encountered when a
serial bootloader did not perform a full teardown/cleanup before
launching NuttX.
Summary:
- ARCH_GLOBAL_IRQDISABLE was initially introduced for LC823450 SMP
- At that time, i.MX6 (quad Cortex-A9) did not use this config
- However, this option is now used for all CPUs which support SMP
- So it's good timing for refactoring the code
Impact:
- Should have no impact because the logic is the same for SMP
Testing:
- Tested with board: spresense:smp, spresense:wifi_smp
- Tested with qemu: esp32-core:smp, maix-bit:smp, sabre-6quad:smp
- Build only: lc823450-xgevk:rndis, sam4cmp-db:nsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
PR #1450 broke the Cygwin build. Refer to Issue #1672.
The use of of logic like:
EXTRA_LIBPATHS += -L "${dir ${shell $(CC) $(ARCHCPUFLAGS) --print-file-name=libgcc.a}}"
fails when the Toolchain $(CC) is a native Windows toolchain. That is because the returned path is a Windows-style patch which cannot be handled by the make 'dir' command. Commit 4910d43ab0 reorganized a lot of definitions and replaced the correct code with the use of the limit make 'dir' command. The original code used the Bash dirname command which does not suffer from this limitation; it can handle both POSIX and Windows paths.
This was verified using the stm32f4discover:nsh toolchain with the Windows native ARM Embedded toolchain. That toolchain returns:
arm-none-eabi-gcc --print-file-name=libgcc.a
c:/program files (x86)/gnu tools arm embedded/9 2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/libgcc.a
Comments only. No functional changes. See STM32G474 Reference Manual
(RM0440 Rev 4), section 3.4.1, Table 11, "Option byte organization."
arch/arm/src/stm32/hardware/stm32g47xxx_memorymap.h:
* STM32_OPTION_BASE: The comment incorrectly said the range was
0x1fff7800-0x1fff780f for a total of 16 Option Bytes. Corrected
this to 0x1fff7800-0x1fff782f, as the device has 48 Option Bytes
for this option block.
* STM32_OPTION_BASE2: The comment incorrectly said the range was
0x1ffff800-0x1ffff80f for a total of 16 Option Bytes. Corrected
this to 0x1ffff800-0x1ffff82f, as the device has 48 Option Bytes
for this option block.
