Gregory Nutt
|
56e4189a73
|
SAMD21: Correct some GCLK ID definitions for SERCOM
|
2015-07-06 09:26:49 -06:00 |
|
Gregory Nutt
|
ef5531b30b
|
SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21
|
2015-07-04 13:18:30 -06:00 |
|
Gregory Nutt
|
724c1eacaa
|
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
|
2015-07-04 10:39:24 -06:00 |
|
Gregory Nutt
|
36ddd9f691
|
Simulatin: Save the intial terminal mode and restore this before terminating. Otherwise, the NSH shutdown command leaves the console in raw mode
|
2015-07-04 08:43:10 -06:00 |
|
Gregory Nutt
|
749907cbbe
|
sim configuration: Add support for board_app_initialize() which is needed when CONFIG_LIB_BOARDCTL=y
|
2015-07-04 08:16:45 -06:00 |
|
Gregory Nutt
|
8db3a7a13e
|
Add a board_app_initilize() stub function needed by the simulatin when CONFIG_LIB_BOARDCTL=y
|
2015-07-04 07:35:14 -06:00 |
|
Gregory Nutt
|
37e681f89a
|
Implementment board_power_off() for the simulation platform.
|
2015-07-04 07:22:38 -06:00 |
|
Gregory Nutt
|
2e5bef56f2
|
SAMD20/1: Fix some typos found by inspecting header files
|
2015-07-04 07:19:52 -06:00 |
|
Gregory Nutt
|
6129df90d6
|
PIC32 USB device: Fix some backward conditional compilation; fix some warnings
|
2015-07-03 14:37:46 -06:00 |
|
Gregory Nutt
|
35bd9756ff
|
PIC32 SPI: Fix some backward conditional compilation
|
2015-07-03 14:36:56 -06:00 |
|
Gregory Nutt
|
e7177afca4
|
MIPS32 header: Missing comma in prototype. How did that happen
|
2015-07-03 14:36:19 -06:00 |
|
Gregory Nutt
|
b8976adfb3
|
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
|
2015-07-03 09:33:52 -06:00 |
|
Gregory Nutt
|
797aa0a138
|
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
|
2015-07-03 06:53:51 -06:00 |
|
Gregory Nutt
|
004c076985
|
Correct some issues introduced in the last commit
|
2015-07-02 17:54:05 -06:00 |
|
Gregory Nutt
|
c3290fdabd
|
Modify board_power_off() so that is is called only via boardctl()
|
2015-07-02 17:09:54 -06:00 |
|
Gregory Nutt
|
19320d157a
|
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
|
2015-07-02 16:25:31 -06:00 |
|
Gregory Nutt
|
51df91e93d
|
STM32 RTCC: Eliminate a warning when ALARM support is enabled
|
2015-07-02 15:02:59 -06:00 |
|
Gregory Nutt
|
1839d132f0
|
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
|
2015-07-02 11:13:23 -06:00 |
|
Gregory Nutt
|
46fec91b12
|
Remove a warning
|
2015-07-01 18:25:13 -06:00 |
|
Gregory Nutt
|
6df1d2823f
|
Fix misc. compilation error/warning detected by tools/testbuild.sh
|
2015-07-01 14:33:37 -06:00 |
|
Gregory Nutt
|
dbc5f910fc
|
Fix some typos in header files
|
2015-07-01 11:45:08 -06:00 |
|
Gregory Nutt
|
c73745bede
|
lpc214x USB device: Fix a warning
|
2015-07-01 10:25:14 -06:00 |
|
Gregory Nutt
|
d20dbf5054
|
LPC17xx: Fix a warning about an unused local variable
|
2015-07-01 09:36:39 -06:00 |
|
Gregory Nutt
|
92f9876f75
|
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
|
2015-07-01 08:34:51 -06:00 |
|
Gregory Nutt
|
77285beeca
|
DM320: GIO header uses get/putreg functions and so should include up_arch.h
|
2015-07-01 08:01:49 -06:00 |
|
Gregory Nutt
|
a1676a177d
|
arch/arm/src/sama5/sam_ehci.c: Fix some bad conditional compilation that left a function undefined if CONFIG_USBHOST_ASYNCH is not selected.
|
2015-07-01 07:04:02 -06:00 |
|
Alan Carvalho de Assis
|
928c88a5f6
|
Port some per-process stack dumping logic from ARMv7-M to ARMv6-M. From Alan Carvalho de Assis
|
2015-06-30 11:42:48 -06:00 |
|
Alan Carvalho de Assis
|
39b77fbe8b
|
Fix Cortex-M0 assembly error when the interrupt stack is enabled
|
2015-06-30 08:41:47 -06:00 |
|
Gregory Nutt
|
fb926e7283
|
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
|
2015-06-28 08:08:57 -06:00 |
|
Gregory Nutt
|
27bdf5d8a1
|
SAMD21: Update SPI and I2C header files for SAMD21 support
|
2015-06-22 13:12:00 -06:00 |
|
Max Neklyudov
|
8438b8eee8
|
SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
|
2015-06-22 09:32:15 -06:00 |
|
Gregory Nutt
|
911b1ce68e
|
SAMD21: Update WDT and EVSYS header files for SAMD21 support
|
2015-06-22 09:15:54 -06:00 |
|
Gregory Nutt
|
52803ee23b
|
Back out another error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc().
|
2015-06-22 07:48:29 -06:00 |
|
Max Neklyudov
|
0f19a33b3d
|
SAM4CM: Fix SUPC register definitions. From Max Neklyudov
Remove conditional logic form non-SAM4CM parts (Gregory Nutt)
|
2015-06-22 06:52:57 -06:00 |
|
Max Neklyudov
|
e4d7b311b7
|
sam4cm: add CFB and MAC AES modes. From Max Neklyudov
|
2015-06-22 06:42:37 -06:00 |
|
Max Neklyudov
|
bdf0b6a9ab
|
Back out an error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). From Max Neklyudov.
|
2015-06-22 06:19:45 -06:00 |
|
Gregory Nutt
|
c5bc7cc120
|
SAMD21: Update SAMD SYSCTRL and NVMCTRL definitions for the SAMD21
|
2015-06-21 11:40:23 -06:00 |
|
Gregory Nutt
|
e7e7b465d5
|
SAMD21: Update fuse definitions for the SAMD21
|
2015-06-21 10:20:23 -06:00 |
|
Gregory Nutt
|
4a38276ff9
|
SAMD21: Extend SAMD USART support to include SAMD21 differences
|
2015-06-21 09:17:01 -06:00 |
|
Gregory Nutt
|
780cb0911d
|
Add board configuration for the SAMD21 Xplained board
|
2015-06-21 07:48:46 -06:00 |
|
Gregory Nutt
|
379a1e114f
|
SAMD21: Add pin multiplexing definitions
|
2015-06-20 18:55:23 -06:00 |
|
Gregory Nutt
|
97d697f7c4
|
SAMD2x: Eliminate a warning
|
2015-06-20 16:06:01 -06:00 |
|
Gregory Nutt
|
5eeabf29dd
|
Missed a few in previous commit
|
2015-06-20 15:55:56 -06:00 |
|
Gregory Nutt
|
1d3abb18e4
|
SAMD21: Update GCLKs for SAMD21
|
2015-06-20 15:55:21 -06:00 |
|
Gregory Nutt
|
d9863f11f6
|
SAMD21: Update PM definitions for SAMD21 support
|
2015-06-20 15:32:57 -06:00 |
|
Gregory Nutt
|
28ae44eb02
|
SAMD21: Add memory map header file
|
2015-06-20 15:02:25 -06:00 |
|
Gregory Nutt
|
66a960dacd
|
SAMD21: Add interrupt vectors definitions
|
2015-06-20 14:40:47 -06:00 |
|
Gregory Nutt
|
15c8e2e00a
|
SAMD21: Add interrupt vectors definitions
|
2015-06-20 14:40:36 -06:00 |
|
Gregory Nutt
|
d00ed2d780
|
Add configuration support for SAMD21
|
2015-06-20 14:31:53 -06:00 |
|
Gregory Nutt
|
e013bb49a8
|
SAML21 USB: Add host side register defintiions
|
2015-06-20 11:09:35 -06:00 |
|