jeditekunum
df36a6243c
Try console on serial 1.
2015-01-26 14:33:25 -06:00
Gregory Nutt
4f5386bbb2
Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth
2015-01-26 07:33:22 -06:00
jeditekunum
2103ca967a
First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board.
2015-01-24 14:31:35 -06:00
Gregory Nutt
fec9e724d7
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
45923970e2
Update README
2015-01-23 16:55:39 -06:00
Gregory Nutt
df9d103360
configs/dk-tm4c129x/ipv6: Add an IPv6-enabled NSH configruation
2015-01-23 11:45:50 -06:00
Gregory Nutt
84102addf0
Cosmetic changes to comments; refresh configuration
2015-01-22 14:46:36 -06:00
Gregory Nutt
ca31cf4608
Refresh configuration/update some misnamed conditional compilation
2015-01-18 11:17:00 -06:00
Gregory Nutt
de923ae391
Missing # in #if in previous commit
2015-01-17 17:13:04 -06:00
Gregory Nutt
3a0812508b
Spark: Certain combinations of conditional compilation results in compilation errors
2015-01-17 14:19:25 -06:00
Gregory Nutt
764b5075bc
Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future
2015-01-14 10:51:09 -06:00
Gregory Nutt
6e51304d4b
Remove the px4-v2_upstream configuration. Moved to misc/Obsoleted/configs.
...
This is not the official configuration for the PX4 board and has led to confusion by NuttX users. The board configuration also requires some ongoing maintenance and customization to support ongoing PX4 testing and evaluation. It is best retained the PX4 repositories where it can be properly maintained and not in the upstream NuttX repository.
2015-01-14 09:54:51 -06:00
Gregory Nutt
f374e5fde4
Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts.
...
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer). Also, do not unconditional enable the timer out interrupt. The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
2015-01-14 07:33:59 -06:00
Gregory Nutt
ef409169fa
Update README
2015-01-13 16:17:07 -06:00
Gregory Nutt
1f24e7e155
Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress.
2015-01-13 11:49:00 -06:00
Gregory Nutt
c2a47142e8
DK-TM3C129X Timer: Add timer initialization logic to the board bring-up
2015-01-13 11:10:35 -06:00
Gregory Nutt
f482e6e3db
TM4C123G LaunchPad: Button support from Bradlye Noyes
2015-01-12 21:14:01 -06:00
Gregory Nutt
427e5c98c5
Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module
2015-01-09 14:10:31 -06:00
Gregory Nutt
80c7fa20b9
Update README
2015-01-07 06:23:24 -06:00
Gregory Nutt
57202946a8
DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration
2015-01-06 13:23:35 -06:00
Gregory Nutt
4d7efb5865
DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup
2015-01-06 13:23:02 -06:00
Gregory Nutt
524ccad0ba
DK-TM4C129X: Add support for on-board TMP100 temperature sensor
2015-01-06 11:50:56 -06:00
Gregory Nutt
9eda193c39
Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt
2015-01-05 15:12:45 -06:00
Gregory Nutt
4457727cec
DK-TM4C129X: Enable I2C6 and the I2C tool in the default configuration
2015-01-05 13:40:55 -06:00
Gregory Nutt
a3b32b0545
DK-TM4C129X: The network monitor is no enabled by default in NSH configuration
2015-01-05 12:09:33 -06:00
Gregory Nutt
43824e4725
Tiva Ethernet: Add support for PHY interrupts
2015-01-03 13:16:26 -06:00
Gregory Nutt
a6d128c06a
DK-TM4C129X: Ethernet networking is now enabled by default in the NSH configuration
2015-01-03 10:27:04 -06:00
Gregory Nutt
1b2d2f81cf
DK-TM4C129X: Fix RAM size in defconfig files
2015-01-03 09:44:02 -06:00
Gregory Nutt
af8245c42c
DK_TM4C129X: Add more GPIO pin definitions
2015-01-01 14:16:05 -06:00
Gregory Nutt
e69855eb72
DK_TM4C129X: Add some GPIO pin definitions
2015-01-01 13:55:53 -06:00
Gregory Nutt
7fbd970ed6
TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers
2015-01-01 12:28:46 -06:00
Gregory Nutt
47480b4696
Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done
2015-01-01 07:55:15 -06:00
Gregory Nutt
9c74f502d6
Refresh configuration
2014-12-31 07:32:47 -06:00
Gregory Nutt
db574ef3cb
Remove menuconfig warning
2014-12-31 07:31:49 -06:00
Gregory Nutt
aff4c9cfd0
stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine.
...
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:50:36 -06:00
Gregory Nutt
868d4b7afc
STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken
2014-12-29 07:02:32 -06:00
Gregory Nutt
217f3fec70
STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported
2014-12-29 07:01:36 -06:00
Gregory Nutt
83b8e15570
Fir STM32v2: Refresh configuration
2014-12-28 18:29:35 -06:00
Gregory Nutt
3089f2e24e
Fire STM32v2: Fix missing stuff in Kconfig file
2014-12-28 18:29:13 -06:00
Gregory Nutt
20b5980828
C5471 EVM: Refresh configurations
2014-12-28 18:15:30 -06:00
Gregory Nutt
9a79849116
Cloudctrl: Add missing configuration logic
2014-12-28 17:51:11 -06:00
Gregory Nutt
78d6c9d21c
Compal e86 NSH: Fix numerous typos in Make.defs
2014-12-28 17:34:59 -06:00
Gregory Nutt
22125246b0
Hymini-STM32v USB MSC: Fix configuration. Needs mountpoint support for USB MSC. Refreshed
2014-12-28 17:12:03 -06:00
Gregory Nutt
febd316186
Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled
2014-12-28 16:55:47 -06:00
Gregory Nutt
d74b28befd
MBED NSH: Should not have CONFIG_SPI_EXCHANAGE in the configuration
2014-12-28 16:39:02 -06:00
Gregory Nutt
de6e8d1852
Freedom-KL25z: Fix breakage from last configuration refresh
2014-12-28 15:23:37 -06:00
Gregory Nutt
6368445671
Mikroe-STM32F4: Refresh one configurations, turning off DEBUG
2014-12-28 14:39:19 -06:00
Gregory Nutt
0c79c319d2
LM3S6965-EK: Refresh one configurations, turning off DEBUG
2014-12-28 14:35:47 -06:00
Gregory Nutt
e847dd1ca0
Freedom KL25Z: Refresh one configurations
2014-12-28 14:30:44 -06:00
Gregory Nutt
21e7606a88
Eagle100: Refresh one configurations, turning off DEBUG
2014-12-28 14:22:11 -06:00
