(1) Now the Ethernet is completely re-initialized when an error occurs by means of taking the interface down and back up but the PHY is _not_ renegotiated for that case because that is very time consuming and an error in the Ethernet is no reflection on the state of the PHY anyway.
(2) Explicitly sets the expected PHY address to zero (this could be moved into the config) rather than searching for it which takes ages, and it's zero anyway for this board (that's the broadcast address, and anything that cannot respond on that has multiple PHYs, so that would be a new board).
(3) Allows for the renegotiation of the PHY to be optional when a reset is needed. If a non-renegotiated reset doesn't result in good comms to the PHY then it'll automatically be escalated to a renegotiated one.
(4) Only performs a reset for errors that need it (the CRITICAL_ERROR define). The list of errors that need reset are somewhat arbitrarily chosen based on my prejudices and might need to be revisited, but certainly the jabber errors don't need reset, the partial packet is thrown away by the layer above anyway.
(5) Re-loads the multicast table on reset.
(6) Adds a bit more logging into the imxrt Ethernet module.
fs/spiffs: Finished review, update, and repartitioning of spiffs_core.c.
fs/spiffs: Converted macro SPIFFS_VALIDATE_OBJIX to a function.
fs/spiffs: Move SPIFFS_VALIDATE_DATA and SPIFFS_CHECK_RES macros inline.
A few improvements to getaddrinfo:
- Use the protocol and socktype hints in returned address
- Ignore AI_PASSIVE argument if hostname is not NULL
Approved-by: GregoryN <gnutt@nuttx.org>
Squashed commit of the following:
fs/spiffs: Fix last compilation issue. Now compiles without error. It is still not quite ready for testing as there is additional code review that must be be performed. It is now marked as EXPERIMENTAL so that it can be brought onto the master branch with little risk.
fs/spiffs: Remove some dead code.
fs/spiffs: Weak start of analysis of spiffs_nucleus.c. Renamed to spiffs_core.c
fs/spiffs: Rename spiffs_nucleus.c to spiffs_core.c
fs/spiffs: Remove spiffs_config.h. All configuration settings are now available in the SPIFFS Kconfig options.
fs/spiffs: Finished review, update, and repartitioning of spiffs_check.c. Added spiffs_check.h.
fs/spiffs: Finished review, update, and repartitioning of spiffs_cache.c. Added spiffs_cache.h.
fs/spiffs: Clean up some defines used in debug output statements.
fs/spiffs: Finished review, update, and repartitioning of spiffs_gc.c. Added spiffs_gc.h.
fs/spiffs: Now that VFS interface is completed, I have begun the long march of repartitioning the remaining functionality, reviewing logic, identifying dead code, and cleaning up loose ends.
fs/spiffs: Initial integration of MTD interface, replacing the SPIFFS native flash interface. Lots of open issues such as the use of pages vs. blocks vs. erase blocks and units of addresses, offsets, and lengths that are passed in function calls. Remove SPIFFS_USE_MAGIC support. That option (which default to OFF anyway), wrote a magic value at the beginning of every sector and support verifiable identification of the file system. It was not being and used and removing it makes life simpler.
fs/spiffs: Remove semaphore lock on the file object structure. Ultimately, the file access must modify the volume and access the volume structue which also has a exclusivity lock. So use of the volume lock alone should be sufficient.
Integrated the SPIFFS rename logic into the NuttX VFS. Removed non-standard application calls or convert them to IOCTL commands. These were converted to IOCTL commands: (1) integrity check, (2) garbage collection, and (3) format flash. These were removed: (1) Integrity check callback. These provided a lot of good information about the state of the file system, but such callbacks are not compatible with a POSIX compliant file system. (2) Index maps. The index maps were a performance improvement feature. The user could provide the memory and request that a region of a a file use that memory for improved lookup performance when accessing parts of the file. The fallback is the less performance lookup by traversing the FLASH memory. (3) Removed the quick garbage collection interface (the code is still used internally). Only the full garbage collection is available to the user application via IOCTL.
configs/sim/spiffs: A simulator configuration to use for testing SPIFFS.
fs/spiffs: Integrate SPIFFS logic into NuttX VFS bind() and unbind() methods.
fs/mount/fs_mount.c: Add SPIFFS to the list of drivers that require MTD vs block drivers.
fs/spiffs: Trivial changes, mostly from analysis of how to integrate the rename() VFS method.
fs/spiffs: Connect NuttX VFS unlink method to the SPIFFS_remove() function. Lots of name-changing.
fs/spiffs: Remove non-standard errno support. Remove bogus SPIFFS_LOCK() and SPIFFS_UNLOCK() macros.
fs/spiffs: Add NuttX VFS implementation for statfs() method. Clean up some of the accumulating compilation problems.
fs/spiffs: Add stat(), truncate() methods. Dummy out unsupport mkdir() and rmdir() methods.
fs/spiffs: Replace some of the custom error numbers with standard error numbers.
fs/spiffs: Hooks read(), write(), fstat(), ioctl(), opendir(), closedir(), rewindif(), and readdir() into the NuttX VFS.
fs/spiffs: Beginning the organization to work with the NuttX VFS. Lots of things are get broken!
fs/spiffs: Add spiffs.c which will be the interface between SPIFFS and NuttX. No very close at present, however.
fs/spiffs: Clean up some compile problems introduced by coding standard changes.
fs/spiffs: A little closer to NuttX coding standard.
fs/spiffs: Ran tools/indent.sh against all files. Closer to NuttX coding standard, but needs a lot more effort to be fully compliant.
fs/spiffs: This commit brings in version 0.3.7 of Peter Anderson's SPIFFS. The initial commit includes the core FS files (with some definitions destributed to their correct header files) and hooks into the build system.
fs/driver and fs/mount: Add mount() support for file systems that require MTD drivers (vs. block drivers).
fs/drivers: Add support for named MTD drivers in the psuedo file system. This will, eventually, allow us to mount file systems that need MTD drivers without having to fake an intervening block driver.
arch/arm/src/lc823450: Fix up_allocate_heap() in lc823450_allocateheap2.c
For lc823450, heap area in flat build mode must start just after
_eronly. Because bss/data area is allocated in lower address than
text area in SRAM. See ld.scripts for details. Also, this change
removes unsed up_allocateheap.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: GregoryN <gnutt@nuttx.org>
Pull request for mtd/progmem refactoring.
* mtd/progmem: change up_progmem_npages to up_progmem_neraseblocks
page is a unit for read/write operation.
eraseblock is a unit for erase operation.
up_progmem_npages is a little bit confusing because it returns number of
erase blocks in flash memory. This patch changes up_progmem_npages to
up_progmem_neraseblocks. There is no logical change.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* mtd/progmem: up_progmem_erasesize.
Change argument name to be more readable.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* mtd/progmem: up_progmem_eraseblock
Change up_progmem_erasepage to up_progmem_eraseblock.
eraseblock is more readable name than erasepage.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* mtd/progmem: change up_progmem_eraseblock's return value.
up_progmem_eraseblock erase a block. so it's better to return the erase block
size than page size.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* arm/cortex-r : fix wrong cp15_flash_dcache.
change mcrne to mcr for unconditional dcache.
Signed-off-by: sungduk.cho <sungduk.cho@samsung.com>
Approved-by: GregoryN <gnutt@nuttx.org>
