Commit Graph

85 Commits

Author SHA1 Message Date
David Sidrane
0817ffbc54 Fixed formatting error I introduced 2020-03-10 14:00:16 -05:00
Gregory Nutt
d43cb2fa80 sched/mqueue: Correct/update license headers.
PR #488 introduced an error in a file license header in file sched/mqueue/mqueue.h.  This commit fixe that error and in the course of doing that, changing the license header to the standard Apache 2.0 header.  I am the author and copyright hold of all modified files.
2020-03-10 11:45:42 -05:00
David Sidrane
a3f99feed1 mqueue.h:Fix style errors 2020-03-08 07:28:04 -06:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Xiang Xiao
bd4e8e19d3 Run codespell -w against all files
and fix the wrong correction
2020-02-22 14:45:07 -06:00
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189)
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Gregory Nutt
6309165fe0 tools/nxstyle.c: Add automatic detection of line width based on examining
the width of all block comments. Includes a check to assure that all block
comments use the same line width.

Verified against all .c files under /sched.  There were a few cosmetic changes to the coding style under /sched to account to new, correctly detected problems in the /sched files.
2020-01-12 13:07:54 -03:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Gregory Nutt
46d435fc65 Various cosmetic changes. 2019-09-09 14:47:47 -06:00
Gregory Nutt
bff30ff9bc Fix minor typo / copy-paste. 'cancellaction point'->'cancellation point' 2019-08-23 11:57:35 -06:00
김정찬
a12f80fb90 sched/mqueue/mq_desclose.c: Add a test to verify that message queue is closed by the same task group that opened it. If not, then list corruption would result. This test is only performed if CONFIG_DEBUG_FEATURES is enabled since it should not normally be an issue: It would be a strange programming practice to open a message queue in open task group, then close it in another. 2019-08-05 18:30:07 -06:00
Gregory Nutt
d7c4cca84d Trivial typo fix to a comment. 2019-06-25 12:27:26 -06:00
Gregory Nutt
abf6965c24 Squashed commit of the following:
libs/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    syscall/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    wireless/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    Documentation/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    include/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    drivers/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    sched/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    configs:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/xtensa:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/z80:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/x86:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/renesas and arch/risc-v:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/or1k:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/misoc:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/mips:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/avr:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/arm:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
2019-04-29 14:52:05 -06:00
Gregory Nutt
f914ec6e2b tools/nxstyle.c: Fix logic that detects if an operator is correctly delimited with spaces. sched/: Various changes because sched/ C files were used as Guinea Pigs to test nstyle.c. 2019-03-01 10:50:02 -06:00
Michał Łyszczek
626afb015b nuttx/sched/mqueue: Change 'int prio' to 'unsigned int prio'. According to open group specification, priority field in mq_* functions should have unsigned type: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/mqueue.h.html 2019-02-15 19:18:55 -06:00
Gregory Nutt
bb623d1e04 This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
Squashed commit of the following:

    Trivial, cosmetic
    sched/, arch/, and include:  Rename task_vforkstart() as nxtask_vforkstart()
    sched/, arch/, and include:  Rename task_vforkabort() as nxtask_vforkabort()
    sched/, arch/, and include:  Rename task_vforksetup() as nxtask_vfork_setup()
    sched/:  Rename notify_cancellation() as nxnotify_cancellation()
    sched/:  Rename task_recover() to nxtask_recover()
    sched/task, sched/pthread/, Documentation/:  Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
    sched/task:  Rename task_schedsetup() to nxtask_schedsetup()
    sched/ (plus some binfmt/, include/, and arch/):  Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
    arch/ and sched/:  Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
    sched/task:  Rename all internal, static, functions to begin with the nx prefix.
2019-02-04 13:42:51 -06:00
Xiang Xiao
d6b0b0d94b sched/mqueue/mq_desclose.c: Fix warning: variable 'msgq' set but not used 2019-01-27 11:08:28 -06:00
Xiang Xiao
fb63c0a293 sched/signal and related changes to other OS subsystems. 2019-01-27 09:28:59 -06:00
Gregory Nutt
3b22d13493 sched/: Add debug assertions before each call to up_block_task() to assure that there is no attempt to block an IDLE task. 2018-11-30 06:54:15 -06:00
Xiang Xiao
a9ff43d93c fs/aio, libs/libc/aio, sched/mqueue, sched/timer, and sched/signal: Remove the code duplication for SIGEV_THREAD. 2018-11-08 08:19:17 -06:00
Gregory Nutt
9546481054 Fix some typographical errors. 2018-09-14 06:55:45 -06:00
Gregory Nutt
fc127fd297 sched/signal: Add a generic signal notification facility. Modify the custom IOB available notifier so that it is now just a wrapper around this generic signal notification. This generic signal notification faility will, eventually, be used to support network polling.
Squashed commit of the following:

    mm/iob:  The IOB available notifier is now just a wrapper around the common signal notifier.

    sched/signal:  Add a generic signal notification facility.

    sched/signal/sig_evthread.c:  More trivial naming changes.

    sched/signal:  Rename nxsig_notification() to nxsig_evthread() to make forthcoming naming additions more consistent.
2018-09-09 08:32:37 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
Simon Liedl
6fe770bb21 Merged in sliedl/nuttx (pull request #700)
sched/mqueue/mq_notify.c: Fix - only part of struct copied to internal structure

As source adress the adress of the struct member sigev_value was used,
and it is not located the start of the struct.
This leads to invalid data being copied to internal structure.
Both source and destination should be of type struct sigevent* .

Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-30 12:50:04 +00:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Alan Carvalho de Assis
fb50c44d08 Fix various issues noted by Coverity 2018-02-06 09:13:16 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
da50646bcf sched/wdog: wd_start() is an internal OS function and should not set the errno value. Reviewed and updated every call to wd_start() to verify if return value is used and if so if the errno value is accessed. 2018-01-31 10:09:14 -06:00
Gregory Nutt
eb79a575f6 Fix a few places where there was a semicolon following the 'if' condition, makeing the following logic unconditional. 2017-10-10 14:24:13 -06:00
Gregory Nutt
e11e3b2607 Squashed commit of the following:
Change all calls to mq_receive() and mq_timedreceive() in the OS to calls to nxmq_receive() and nxmq_timedreceive(), making appropriate changes for differences in return values.

    sched/mqueue:  Add nxmq_receive() and mxmq_timedreceive() which are functionally equivalent to the standard mq_receive and mq_timedreceive() except that (1) they do not create cancellation points, and (2) the do not modify the application's errno variable.
2017-10-10 09:57:40 -06:00
Gregory Nutt
fca07be1df Squashed commit of the following:
Change all calls to mq_send() and mq_timedsend() in the OS to calls to nxmq_send() and nxmq_timedsend(), making appropriate changes for differences in return values.

    sched/mqueue:  Add internal function nxmq_send() and nxmq_timedsend() that are equivalent to mq_send() and mq_timedsend() except that they do not create cancellation points and do to not modify the errno variable.
2017-10-10 08:44:12 -06:00
Gregory Nutt
e7c52bac60 Squashed commit of the following:
sched/mqueue:  Rename all private static functions for use the nxmq_ vs. mq_ naming.

    sched/mqueue:  Rename all OS internal functions declared in sched/mqueue/mqueue.h to begin with nxmq_ vs. mq_.  The mq_ prefix is reserved for standard application interfaces.
2017-10-09 09:06:46 -06:00
Gregory Nutt
8198ba6a6d This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_
This is analogous to similar renaming that was done previously for semaphores.

Squashed commit of the following:

    sched/signal:  Fix a few compile warnings introduced by naming changes.

    sched/signal:  Rename all private, internal signl functions to use the nxsig_ prefix.

    sched/signal:  Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 13:25:25 -06:00
Arjun Hary
b274a97840 Miscellaneous fixes from astyle tool. 2017-08-14 17:19:27 -06:00
Gregory Nutt
d5207efb5a Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
Jussi Kivilinna
c57d49f420 clock: Add new type ssystime_t for relative 64-bit ticks, change ticks<->time conversion functions to use ssystime_t 2017-04-21 08:51:31 -06:00
Gregory Nutt
dca77fa06a sigtimedwait: When timer expires, up_unblock_task() is called. This is okay in the single CPU case because interrupts are disable in the timer interrupt handler. But it is insufficient in the SMP case. enter_ and leave_critical_section() must be called in order to manage spinlocks correctly. 2017-02-24 10:07:23 -06:00
Gregory Nutt
74189d84e2 Cancellation points: Fix some backward logic in conditional compilation. 2017-02-02 06:42:41 -06:00
Gregory Nutt
6997cda1b5 Grrr... cloned typos! 2016-12-10 09:45:55 -06:00
Gregory Nutt
842ec7e612 ifdef out some non-reachable code 2016-12-10 09:43:04 -06:00
Gregory Nutt
b52e4e5ecd Move cancellation point definitions to their own header file. 2016-12-10 09:08:26 -06:00
Gregory Nutt
bc3ca25cc7 Cancellation points: Close up some logic to eliminte some race conditions. 2016-12-10 08:36:58 -06:00
Gregory Nutt
7fce8022c6 Finishes all cancellation point logic 2016-12-09 16:50:34 -06:00
Gregory Nutt
f0b4705d57 Correct a comment 2016-09-15 13:10:42 -06:00
Gregory Nutt
e3bbfa2d85 mq_send() was not setting the errno value on certain failures to allocate a message 2016-09-15 12:42:24 -06:00
Gregory Nutt
368f241637 Correct some comments 2016-09-15 08:46:41 -06:00
Gregory Nutt
3fba968bb0 Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov. 2016-04-11 11:14:18 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00