Gregory Nutt
ad216583b7
SAMV7: Fix some cloning errors. SAMA5->SAM7
2015-03-13 10:38:10 -06:00
Gregory Nutt
74548a5ed4
Fix a typo in a Cortex-M7 address
2015-03-13 10:37:21 -06:00
Gregory Nutt
361d4a3fac
SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK
2015-03-13 09:27:16 -06:00
Gregory Nutt
a45d7ca909
Update ChangeLog
2015-03-13 07:31:26 -06:00
Gregory Nutt
c5953bd0e9
Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf
...
and this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf ) shows that ACMD23
must be preceeded with CMD55 command as any other ACMD commands.
Also, after the block reading wait loop must be inserted before writing the next block of data to
the sd card
From Dmitry Nikolaev via Jussi Kivilinna
2015-03-13 07:26:16 -06:00
Gregory Nutt
3473bb1635
drivers/serial: Report correct number of bytes free in serial buffer with FIONWRITE. From Jussi Kivilinna.
2015-03-13 07:22:43 -06:00
Gregory Nutt
0a939ff218
Pipes: Fix zero-lenth writes. From Jussi Kivilinna
2015-03-13 07:21:06 -06:00
Gregory Nutt
ce0021e753
STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna
2015-03-13 07:18:21 -06:00
Gregory Nutt
6cb5b48300
STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna.
2015-03-13 07:06:46 -06:00
Gregory Nutt
639a2c7fd2
Update to PIC32MZ README from David Sidrane
2015-03-13 06:57:58 -06:00
Gregory Nutt
4580af6d0b
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
2015-03-12 18:03:41 -06:00
Gregory Nutt
743fd5ac50
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
2015-03-12 16:00:38 -06:00
Gregory Nutt
b4b59f928f
Minor update to README
2015-03-12 13:43:54 -06:00
Gregory Nutt
da3233a527
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
2015-03-12 12:27:06 -06:00
Gregory Nutt
109b9910f6
SAMV7: Add TWI/I2C driver (untested)
2015-03-12 10:58:11 -06:00
Gregory Nutt
00a841c417
SAMV7: Add SPI header files and driver
2015-03-12 09:12:37 -06:00
Gregory Nutt
a614fd8d6e
Update ChangeLog
2015-03-12 08:14:26 -06:00
Gregory Nutt
3ba9dda227
socket: net_dupsd: Do not call sockfd_socket() twice. From Juha Niskanen
2015-03-12 08:11:08 -06:00
Gregory Nutt
0b8248b33c
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
2015-03-12 08:08:50 -06:00
Gregory Nutt
9997fa77ad
ARMv7-M MPU. Bad syntax will cause failure to write the correct value to the MPU_RASR register. From Juha Niskanen
2015-03-12 08:00:53 -06:00
Gregory Nutt
dba41a7048
chdev_driver: Avoid NULL pointer dereference when bch->refs == 255. From Juha Niskanen
2015-03-12 07:58:36 -06:00
Gregory Nutt
26b9b5a252
usbdev: usbmsc_scsi: Add NULL pointer check. From Juha Niskanen
2015-03-12 07:55:53 -06:00
Gregory Nutt
99f4e31b69
stm32_i2c: Add missing NULL check. From Juha Niskanen
2015-03-12 07:53:41 -06:00
Gregory Nutt
c39725b398
libc: stdio: Fix NULL pointer dereference in ungetc(). If 'stream' was NULL, 'stream->fs_oflags' was evaluated. From Juha Niskanen
2015-03-12 07:51:23 -06:00
Gregory Nutt
af6d9e2684
sched: Do not use uninitialized boolean in waitpid(). From Juha Niskanen
2015-03-12 07:45:10 -06:00
Gregory Nutt
6792cb3e34
procfs: fs_procfsproc: Fix potential NULL pointer dereference of 'node'. From Juha Niskanen
2015-03-12 07:42:39 -06:00
Gregory Nutt
70e7dcba71
Bringing PPPD yet closer to the NuttX coding style
2015-03-11 18:47:04 -06:00
Gregory Nutt
90bc4b81ee
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
2015-03-11 14:41:58 -06:00
Gregory Nutt
3d60cc7768
SAMV7: Correct low-level console output
2015-03-11 14:39:32 -06:00
Gregory Nutt
298cf7e8e3
Update ChangeLog
2015-03-11 13:14:15 -06:00
Gregory Nutt
d36d7a959d
FAT: fat_unbind() was accessing 'fs->fs_sem' after freeing the 'fs' struct. From Juha Niskanen.
2015-03-11 13:11:50 -06:00
Gregory Nutt
1a68ee6824
Update README
2015-03-11 12:32:00 -06:00
Gregory Nutt
ca8165dd10
SAMV71-XULT: Enable 64-bit floating point support
2015-03-11 12:30:14 -06:00
Gregory Nutt
da844f1a88
SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7
2015-03-11 12:16:27 -06:00
Gregory Nutt
508d96b571
SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs
2015-03-11 11:23:19 -06:00
Gregory Nutt
e8e357cc1d
PIC32MZ: Fixes from Kristopher Tate
2015-03-11 10:25:51 -06:00
Gregory Nutt
e2a6b7f5b0
SAMV7-XULT: Switch back to the CodeSourcery tools
2015-03-11 10:24:43 -06:00
Gregory Nutt
65e34be9b4
Update COPYING file with special license requirements for PPPD
2015-03-11 09:14:15 -06:00
Gregory Nutt
634762cfda
Update ChangeLog
2015-03-11 07:56:37 -06:00
Gregory Nutt
21d6e41032
Add TUN device. From Max Neklyudov
2015-03-11 06:52:56 -06:00
Gregory Nutt
834072815b
SAMV71-XULT: Some bugfixes from early bring-up work
2015-03-10 16:11:28 -06:00
Gregory Nutt
e23002fcfc
Update ChangeLog
2015-03-10 12:17:54 -06:00
Gregory Nutt
fe1aaf76fc
Tiva TimerLib: Fix a typo in peripheral waiting logic: gptm, not gpio. From Bradley Noyes
2015-03-10 12:16:40 -06:00
Gregory Nutt
caea44a624
Fix a case in mq_timedsend() where the return errno value was being overwritten
2015-03-10 12:05:33 -06:00
Gregory Nutt
426888efb5
SAMV7: Add logic to enable/disable TCMs
2015-03-10 11:32:05 -06:00
Gregory Nutt
7d46801f46
Reorder some operations to minimize a race condition
2015-03-10 10:41:21 -06:00
Gregory Nutt
c5c963c55d
Update ChangeLog
2015-03-10 09:51:05 -06:00
Gregory Nutt
4c6057eca1
mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin
2015-03-10 09:42:35 -06:00
Gregory Nutt
36e88e504a
SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration
2015-03-10 07:50:32 -06:00
Gregory Nutt
1b4e32ef20
Update README
2015-03-09 19:58:59 -06:00
