sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,304 Commits 1 Branch 0 Tags 291 MiB
781f537f3e
Commit Graph

1156 Commits

Author SHA1 Message Date
Gregory Nutt
5120d745fd Fix some typos 2014-10-29 10:48:50 -06:00
Gregory Nutt
6c9f325e1e Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
0196b77961 EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
37e08c3b49 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d13c9a08b9 EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
fa3753c466 rivers: enable usage of ili9341 
This enables build and configuration of the ili9341 lcd interface driver.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:27:56 -06:00
Gregory Nutt
beff697bc7 drivers: implements lcd interface for ili9341 
This implements the lcd interface to displaying data on the lcd display powered
by the ili9341 lcd driver.

This driver implements all methods defined in the lcd_dev_s structure except
getcontrast and setcontrast. They are not supported by the hardware.

Furthermore the driver allows to use multiple displays powered by the ili9342 IC
with only one driver instance. So it is theoretically possible to support more
than one connected ili9341 lcd display. The displays can be configured
independently. Currently two lcd devices supported. This should be enough for
now. Read the corresponding code section of how to add more devices if
neccessary.

The following settings are configurable:

1. Pixel format
   Define the pixel format of the connected display. Currently only
   RGB-565 supported.

2. Orientation
   Define the orientation of the display. This can be portrait or
   landscape and reversed values.

1. Write only
   The driver allows to disable any getrun method if not neccessary to
   reduce code size. This is done by enable CONFIG_LCD_NOGETRUN in the nuttx
   configuration.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:19:43 -06:00
Gregory Nutt
1a27a4d4c0 Eliminate warnings 2014-10-11 17:02:35 -06:00
Gregory Nutt
c38b81431f Cosmetic updates to comments 2014-10-11 15:20:21 -06:00
Gregory Nutt
d7d759f7a7 Update everything under nuttx/drivers to use the corrected syslog interfaces 2014-10-08 10:18:58 -06:00
Gregory Nutt
b33f8b3013 MTD read-ahear/write buffering layer seems functional 2014-09-25 13:35:10 -06:00
Gregory Nutt
a5bc26db4a Fixes for compile of rwbuffer.c 2014-09-25 11:02:30 -06:00
Gregory Nutt
7c89724b99 A few fixes for clean apps/examples/mtdrwb build 2014-09-25 10:41:47 -06:00
Gregory Nutt
6626f62b08 In at45db_bwrite, the buffer is not increased when writing more than 1 page. Sourceforge bug #34 2014-09-25 06:48:04 -06:00
Gregory Nutt
34a057334c Update SMART FS procfs support. From Ken Pettit 2014-09-22 11:19:49 -06:00
Gregory Nutt
b37c0a832a Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
47d55c28dc Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
23147c40a5 Remove final traces of the 8015 from the NuttX source tree 2014-09-01 13:21:15 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
9cd1ddada4 Rename kmemalign to kmm_memalign and krealloc to kmm_realooc for consistency with other naming 2014-08-31 15:27:37 -06:00
Gregory Nutt
2906ff6a4a Cosmetic: Fix all comments, defaults, etc. that references the defunct name user_start 2014-08-30 11:14:51 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
98cf3b06e5 nuttx/drivers: Remove explicity references to errno. That is a problem from within the kernel for certain configurations 2014-08-28 16:59:06 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
cf242fbeb4 SAM4E-EK: Add ILI9341-based LCD driver 2014-08-20 11:45:01 -06:00
Gregory Nutt
004788d7c0 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
7cc93b708a SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts 2014-08-17 14:07:53 -06:00
Gregory Nutt
e04ab2bcfc In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts) 2014-08-17 13:03:18 -06:00
Gregory Nutt
eb5e2e4b20 Finishes the ioctl definition to subscribe to PHY events. Revamp network ioctl signature to support arguments other than struct mii_ioctl_data. 2014-08-16 14:08:04 -06:00
Gregory Nutt
8428a58bdc Add support for an ioctl that can be used to notify an application when there is a change in the network status signalled by a PHY interrupt 2014-08-16 12:56:02 -06:00
Gregory Nutt
4beb3c0ad7 Move SLIP prototypes from net.h to new slip.h 2014-08-16 10:23:17 -06:00
Gregory Nutt
c52f634b79 Standardize a PHY interrupt attachment interface 2014-08-16 08:34:36 -06:00
Gregory Nutt
320707fdfa SAMA5: Fix bugs in timer/counter interrupts and one-shot timer 2014-08-10 10:47:38 -06:00
Gregory Nutt
a3e28c2c16 audio NULL driver: Fix an error in a variable name 2014-08-09 10:33:31 -06:00
Gregory Nutt
6e0acd7cd4 WM8904: Don't use MSEC2TICK in timeout calculation 2014-08-08 11:02:45 -06:00
Gregory Nutt
c9661ad5a7 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
bb29ba0a00 Costmetic changes 2014-08-05 10:03:29 -06:00
Gregory Nutt
8065ab73a4 WM8904: Add reset logic to put the part back in its initial state after playing each WAV file. Base samles per second on frame length, not bits-per-sample. Use a different frame length for 8-bit and 16-bit data 2014-08-04 19:26:43 -06:00
Gregory Nutt
dc8b040573 WM8904: Correct calculation of bitrate (I am not sure why this is correct). LR clock divisor is now a constant 32-bits per frame. Conditioned out interrupt logic; it is not being used. Also added some FLL lock interrupt/poll logic (which was subsequently disabled). 2014-08-04 15:08:20 -06:00
Gregory Nutt
c68e42c437 WM8904: Restore mystery bit in setup that was accidentally tossed before 2014-08-03 19:29:02 -06:00
Gregory Nutt
678c0aac8d WM8904: Tried disabling the SYSCLK while updating the FLL. Didn't help but is still probably a correct change 2014-08-03 18:44:51 -06:00
Gregory Nutt
72b739fbcb WM8904: Add logic to analyze BCLK setup 2014-08-03 17:11:38 -06:00
Gregory Nutt
b9384ced60 WM8904: Various updates to get BCLK/LRCLK correct. Acutally worse the parent, but I think is on the right track 2014-08-03 13:28:20 -06:00
Gregory Nutt
b0d0ac72a7 WM8904 driver: Disable the FFL at the end of playing. 2014-08-02 14:28:10 -06:00
Gregory Nutt
a2d6c0c2b4 WM8904: Add logic to program the FLL to achieve the bitrate 2014-08-02 12:40:57 -06:00
Gregory Nutt
f4bc0ad99a WM8904: Add an option to control WM8904 register dumping 2014-08-02 06:52:42 -06:00
Gregory Nutt
7e576e308a WM8904 I2C: Fix an error in writing. I am not sure why this fixes the problem 2014-08-01 18:22:33 -06:00
Gregory Nutt
e59bb45b33 Add debug logic to dump WM8904 registers 2014-08-01 18:07:20 -06:00