Unbinding `ff_currentcluster` and `f_pos`:
1. Added `ff_pos` in `struct fat_file_s`.
2. Added function `fat_zero_cluster` for doing zeroing for gap
between EOF and new position beyond EOF.
3. Added function `fat_get_sectors` for getting the sector where
`f_pos` is located, allocting new cluster when `f_pos` is beyond
EOF.
4. Modify function `fat_read`, and `fat_write` with above functions.
5. Remove redundant logics in `fat_seek` since now new cluster is
allocated when writing instead of seeking.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
The link script of NuttX Simulator is generated through compilation
options. This PR will support configure special data sections in
kconfig to meet the support of 3rd party applications.
we need to follow the syntax of linker script. In 3rd-party applications, some data will be labeled as section:
| a.c:
| struct task_s a __attribute__((section(".data.custom.taska")));
| b.c:
| struct task_s b __attribute__((section(".data.custom.taskb")));
Data of the same type struct can be placed in a fixed location to reduce the overhead caused by searching:
| .data :
| {
| _custom_data_table_start = .;
| KEEP(*(.data.custom.*))
| _custom_data_table_end = .;
| }
Such section declare can be configured via Kconfig in the PR:
| CONFIG_SIM_CUSTOM_DATA_SECTION=" .data : { _custom_data_table_start = .; KEEP(*(.data.custom.*)) _custom_data_table_end = .; } "
Signed-off-by: chao an <anchao@lixiang.com>
In the algorithm there is a subtraction (int - unsigned), which results (potentially overflowed)
unsigned.
Passing this to macro ABS and the assigning to int doesn't work ( unsigned is always >= 0 ).
Fix this by replacing (dangerous) ABS macro with stdlib's standard "int abs(int)"
and change the substraction to (int - int).
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is an initial FlexSPI SPI NOR MTD driver for IMX9
This supprts M25P SPI NOR on FlexSPI for now, and can later be extended to other
SPINOR devices if needed. The following configurations are needed to use this driver:
CONFIG_IMX9_FLEXSPI_NOR=y
CONFIG_MTD_M25P=y
In addition, board initialization logic needs to call the imx9_flexspi_nor_initialize
to receive a pointer to the mtd device.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Co-authored-by: Jouni Ukkonen <jouni.ukkonen@unikie.com>
This commit implements a character driver for the general purpose ADC of the BL808, based on the hardware scanning functionality. The driver supports setting different conversion resolutions and the order of channels to be scanned via menuconfig.
Following warnings were caused by incorrect naming of few defines.
chip/sam_mcan.c:415:7: warning: "MCAN1_NTSEG1" is not defined, evaluates to 0 [-Wundef]
415 | # if MCAN1_NTSEG1 > 63
| ^~~~~~~~~~~~
chip/sam_mcan.c:418:7: warning: "MCAN1_NTSEG2" is not defined, evaluates to 0 [-Wundef]
418 | # if MCAN1_NTSEG2 > 15
| ^~~~~~~~~~~~
chip/sam_mcan.c:421:7: warning: "MCAN1_NSJW" is not defined, evaluates to 0 [-Wundef]
421 | # if MCAN1_NSJW > 15
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This compilation flag was added in the same way as done for esp32
in order to avoid unexpected behaviors when accessing registers
using struct bitfields.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
Move and unify map_rom_segments function called when starting
Simple Boot and MCUboot compatible images.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
sometimes ubsan work with asan trigger a mistake report, make it
possible to export library with ubsan, and bypass runtime feature.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
This current driver does not handle well netpkts used in the
write buffers.
I learned about this document:
https://github.com/apache/nuttx/blob/master/Documentation/components/net/netdriver.rst
After I ported and contributed the original driver.
However from the document, I understand these types of drivers are
simpler to implement and I could simplify the driver and handle
correctly the TCP write buffers.
- This PR adds the LED Driver for Ox64 Board (User LEDs and Auto LEDs)
- Ox64 LED Driver will be used by the Rust Blinky App for Google Summer of Code
- User LED 1 is configured for GPIO 29. Other User LEDs and Auto LEDs shall be configured by the NuttX Dev.
- The code is derived from NuttX PinePhone LED Driver
Add addrenv support for x86_64.
For now we support mapping on PT level, so PD, PDT and PML4 are static
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
use new MMU api to implement up_map_region().
The new implementation support maping over 0xffffffff but requires CONFIG_MM_PGALLOC=y
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
During the boot phase, when we transition from tee smp to ap smp, we can use a busy waitflag to wait for the completion of the initialization of ap's core0
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
because 'g_cpu_nestcount[me] > 0' will never happen, in this place
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Only in the non-critical region， nuttx can the respond to the irq and not hold the lock
When returning from the irq, there is no need to check whether the lock needs to be restored
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
When the PSRAM is enabled, we should not allocate the TX/RX
buffers there, so we use kmm_calloc here, to make it into IRAM,
so the ethernet controller can read bytes from it.
