sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,957 Commits 1 Branch 0 Tags 291 MiB
7bd3d5eaf1
Commit Graph

176 Commits

Author SHA1 Message Date
Gregory Nutt
7bd3d5eaf1 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
a5043d5e60 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
f0d318c124 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
8bac6b71ce SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
3dd3b1f5e2 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
bac1ab9a34 Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
ae82fa65a6 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
fc1017d0de Minor/cosmetic changes 2014-04-27 08:32:36 -06:00
Gregory Nutt
75928b420e Zneo: ESPI needs to configure GPIO for ESPI 2014-04-26 13:58:38 -06:00
Gregory Nutt
4ba0a0b218 Zneo: Misc minor updates from debugging 2014-04-26 12:42:44 -06:00
Gregory Nutt
5a0917535c Zneo: Fix UART1 buffer setup 2014-04-26 10:51:29 -06:00
Gregory Nutt
07bc8e53ff ZNeo Serial: Need to configure UART1 alternate function 2014-04-26 09:43:40 -06:00
Gregory Nutt
344ed99bd4 Zneo Serial: Fix cut'n'paste error in some conditional configuration 2014-04-26 08:23:11 -06:00
Gregory Nutt
3a2b1b0060 ZNeo: Calculation of timer reload and prescaler was wrong 2014-04-25 15:38:00 -06:00
Gregory Nutt
b261a9886a Updates to ZNeo configurations + misc cosmetic changes to comments 2014-04-25 11:59:17 -06:00
Gregory Nutt
e8e2282bc2 16z: Reduce size of stacks 2014-04-25 09:56:07 -06:00
Gregory Nutt
0d43e59062 Minor and cosmetic changes from initial 16z (v2) bringup 2014-04-24 15:55:53 -06:00
Gregory Nutt
99135ac140 ZNEO: Add ESPI driver 2014-04-24 12:52:34 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
66df3afd46 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
5b9f1f54c2 Add option to dump buffered USB trace data on an assertion 2014-03-20 10:56:30 -06:00
Gregory Nutt
b3792fcd86 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
a26b03d0d0 rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
231889c888 The optimization level can now be selected as part of the configuration 2014-01-24 07:45:35 -06:00
Gregory Nutt
74630ea610 Should enable external bus after configuring it 2014-01-23 17:41:29 -06:00
Gregory Nutt
86fd6af866 16z: Fix option bits; adjust system clock frequency 2014-01-23 12:06:57 -06:00
Gregory Nutt
4b74cf594f 16Z: Some early bring-up fixes 2014-01-22 13:46:42 -06:00
Gregory Nutt
e44748d1c3 configs/16z: Add support for 16z board 2014-01-22 11:50:37 -06:00
Gregory Nutt
e370c5fc72 ZNEO: Fix lost serial interrupt bug 2014-01-02 10:03:08 -06:00
Gregory Nutt
e8cf8801e6 Add Z16F NSH configuration 2014-01-01 12:40:18 -06:00
Gregory Nutt
f53f269a84 Kconfigs: Interrupt prioritization should not be automatically selected 2013-12-20 08:42:54 -06:00
Gregory Nutt
74b2ac023d Various changes for a clean ZNEO ZDS-II build 2013-12-19 10:01:52 -06:00
Gregory Nutt
4aaee6fb3c Clean up some naming: fd vs. fildes vs. filedes and filep vs filp 2013-09-28 16:50:07 -06:00
Gregory Nutt
f0c36e422f Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
3aa94411be Remove up_assert_code 2013-04-25 15:19:59 -06:00