armv8-m/arm_securefault.c:69:3: warning: implicit declaration of function 'syslog_flush'; did you mean 'syslog_like'? [-Wimplicit-function-declaration]
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
This small fix ensures all DMA pointers are correctly reseted during
DMA setup (when the driver is opened). Without this there could be rare
occurrence of driver pointer to incorrect (invalidate) DMA buffer and thus
saving incorrect characters to upper layer.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Circular buffer does not use DMA linked list therefore function
sam_freelinklist() cannot be called as it would fail on assertion (csa
not defined). Peripheral that calls DMA should care of buffer invalidation
instead.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Port based on arch/arm/nrf53.
Modem not fully supported yet. At the moment, initialization and AT interface work.
Sockets and GNSS interface will be added later.
CONFIG_ARM_TOOLCHAIN_GNU_EABI build got broken when -mthumb option was moved
from ARCHCPUFLAGS to ARCHOPTIMIZATION variable:
arm-none-eabi-ld: error: .../build/nuttx/nuttx uses VFP register arguments, /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_fixunsdfdi.o) does not
arm-none-eabi-ld: failed to merge target specific data of file /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_fixunsdfdi.o)
arm-none-eabi-ld: error: .../build/nuttx/nuttx uses VFP register arguments, /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_udivmoddi4.o) does not
arm-none-eabi-ld: failed to merge target specific data of file /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_udivmoddi4.o)
since symbols defined in arch/elf.h is also used in other case, for example:
CC: pthread/pthread_testcancel.c machine/arm/gnu_unwind_find_exidx.c:32:8: error: unknown type name '__EIT_entry'
32 | static __EIT_entry *__exidx_start_elf;
| ^~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The following macros
__ARCH_ARM_SRC_STM32F7_HARDWARE_STM32F74XX75XX_FLASH_H
__ARCH_ARM_SRC_STM32L4_HARDWARE_STM32L4X6XX_RCC_H
are used in other header files.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
USBD has many limitation that make it hard to work properly:
- only one EasyDMA channel which must be shared for all EPs
- only one DMA transfer can take place at a time
- some registers are unavailable during DMA transfer
- in case of any problems, the peripheral silently blocks,
or lose the transmitted bytes without information for the user
This commit is trying to fix these problem and makes the USBS stack more reliable.
Tested with high-speed CDCACM data transfers and that's the best I've been able to get in terms of stability.