Modify the file according to the checks
update the board config files, and modify the gd32f4xx_progmem.c
Add chip GD32F450 of GD32MCU
delete the micro FAR, modify code style
Add chip GD32F450 of GD32MCU
Issuing the following commands doesn't succeed:
- conn
- disconn
- conn
This USB driver doesn't even disconnect without this patch.
If the USB driver has been started from another hart, closing it
will not disable the PLIC interrupt. This means it's possible many
harts get the USB interrupt and thus make the USB look very unstable.
Fix these problems by disconnecting the USB via the USB_POWER
register at shutdown and disabling the interrupt at shutdown. Also
clear the software internals via the mpfs_sw_setup() for the conn /
disconect loop to succeed.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
in struct work_s:
union
{
struct
{
struct dq_entry_s dq; /* Implements a double linked list */
clock_t qtime; /* Time work queued */
} s;
struct wdog_s timer; /* Delay expiry timer */
}
while we use WDOG_ISACTIVE(&work->timer) to decide use dq or timer,
that is error, wd_cancel() maybe modify this area, dq_rem() also can
modify this area.
So we can't use the WDOG_ISACTIVE(&work->timer) to take as the judgement,
when there is a union.
Fix:
swap the order in struct wdog_s, move the arg to the second 32bit
Signed-off-by: ligd <liguiding1@xiaomi.com>
- Add check in roundx() functions for infinite or NaN cases
- Add block to avoid style warnings
- Define long double constants and macros for infinity and nan
- Correct return syntax to match NuttX style
- Make c89 compliant
- Fix definitions of INFINITY_L/NAN_L
* include/nuttx/lib/math.h - match standard naming conventions
- Rename isinf_l to isinfl
- Rename isinf_f to isinff
- Add finite()
- Add finitel()
- Add finitef()
- Define isnanl and isnanf
- Define isfinite() so that it uses the appropriate macro
* libs/libc/math/lib_asinf.c
libs/libc/math/lib_asinl.c
libs/libc/math/lib_roundf.c
libs/libc/math/lib_roundl.c
libs/libc/math/lib_sqrtf.c
libs/libc/math/lib_sqrtl.c
- Use renamed macros
- Use correct NAN_x or INFINIT_x macro on returns
* boards/arm/tiva/tm4c129e-launchpad: New subdirectory providing
board support for the Texas Instruments TM4C Crypto Connected
LaunchPad, or more correctly the EK-TM4C129EXL.
* Documentation/introduction/detailed_support.rst,
Documentation/introduction/supported_platforms.rst,
boards/README.txt: Document the additional board support.
* boards/Kconfig:
(ARCH_BOARD_TM4C129E_LAUNCHPAD): New config.
(ARCH_BOARD): Add tm4c129e-launchpad.
(Board-Specific Options): Source the board-specific Kconfig
boards/arm/tiva/tm4c129e-launchpad/Kconfig when selected.
Summary:
- I noticed that the latest ifconfig command shows nothing
- Finally, I found that gs2200m.c needs to handle SIOCGIFFLAGS
- This commit fixes this issue
Impact:
- gs2200m only
Testing:
- Tested with spresense:wifi
- NOTE: gs2200m_main.c will be updated later
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
There one ways can caused this:
mq_timedreceive
TIMER IRQ do wd_timer -> wd_func1 mq_send
-> wd_func2 nxmq_rcvtimeout -> crash
Resolve:
Stop the watchdog when mq_send
Signed-off-by: ligd <liguiding1@xiaomi.com>
The underlying hardware supports 9 endpoints:
- EP0
- 4x IN EPs
- 4x OUT EPs
Currently the driver assumes every EP number is unique. This limits
the amount of EPs to 1 + 4 = 5. Utilize the EPs in such a manner
that all may be used.
Also fix a few error handling related bugs. Update the composite
driver to match the current situation as well.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
In file included from route/net_del_ramroute.c:30:
route/net_del_ramroute.c: In function ‘net_match_ipv4’:
route/net_del_ramroute.c:93:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat=]
93 | ninfo(" target=%08lx netmask=%08lx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
route/net_del_ramroute.c:93:23: note: format string is defined here
93 | ninfo(" target=%08lx netmask=%08lx\n",
| ~~~~^
| |
| long unsigned int
| %08x
mld/mld_timer.c: In function ‘mld_gendog_work’:
mld/mld_timer.c:118:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
118 | ifindex = (int)arg;
| ^
mld/mld_timer.c: In function ‘mld_v1dog_work’:
mld/mld_timer.c:237:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
237 | ifindex = (int)arg;
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
The return value of function mm_takesemaphore will never below
than zero, DEBUGVERIFY make no effect to check it, use DEBUGASSERT
instead.
Signed-off-by: xiangdong6 <xiangdong6@xiaomi.com>
This commit enhances imxrt encoder driver with index capture support.
The index is captured when the index interrupt occurs and can be passed
to application layer with QEIOC_GETINDEX ioctl call.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This IOCTL (QEIOC_GETINDEX) allows the application to get the actual
encoder position, the index last position and the index count with
one IOCTL call if supported by architecture specific level.
The position, index and count is passed to application level through
qe_index_s structure.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
