Config option IMXRT_ADCx_ETC can now be used to select an external HW
trigger to be used instead of continous trigger. Continous trigger is
used if IMXRT_ADCx_ETC = -1 (default option). Otherwise the source signal
is routed through XBAR and used as a trigger.
Hardware triggering is currently limited to maximum of 8 channels.
HW trigger is automatically disabled if there are more than 8 channels.
The external triggering was tested with PWM signal as a source.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
1.
make[1]: *** No rule to make target 'tms570_spi.c', needed by '.depend'. Stop.
2.
In file included from armv7-r/arm_gicv2.c:36:
armv7-r/gic.h: In function 'arm_gic_nlines':
armv7-r/mpcore.h:63:29: error: 'CHIP_MPCORE_VBASE' undeclared (first use in this function)
63 | #define MPCORE_ICD_VBASE (CHIP_MPCORE_VBASE+MPCORE_ICD_OFFSET)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
since armv7-r does not support kernel mode
./armv7-r/arm_syscall.c:36:10: fatal error: addrenv.h: No such file or directory
36 | #include "addrenv.h"
| ^~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
Summary:
- Currently, CONFIG_ARCH_PGPOOL_MAPPING=y is necessary for
CONFIG_BUILD_KERNEL=y.
- This commit removes the code for CONFIG_ARCH_PGPOOL_MAPPING=n
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This commit supplements commit 7d877fbb. External sync mode is now
disabled if XBAR connection fails and config options are used directly
in sync_src variable and passed to XBAR macro only when needed. The first
option could caused an undefined behaviour when sync_src was equal to -1
(external sync not used)
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
- Because a context switch issue still exists with FPU
the configs should be removed until it works.
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Otherwise, after the rx error occur, the tx output will be
out of sequence, for example:
normal log:
[ 30.163000] 12345678abcdefgh
[ 30.666000] 12345678abcdefgh
[ 31.169000] 12345678abcdefgh
[ 31.672000] 12345678abcdefgh
[ 32.175000] 12345678abcdefgh
[ 32.678000] 12345678abcdefgh
[ 33.181000] 12345678abcdefgh
error log:
he 7 .20]0003 127456c8abgdefch
gde [6.707002] 16345b78afcde
fcde
fghe10010] 5234a678ebcd
77 713 00]41238567dabchefgd
che 7 .21]0003 127456c8abgdefch
gde [8.709002] 16345b78afcde
fcde
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Since tlsr arch support A/B bank, the hardware support
relative addr to load or store, but for flash read,
must use absolute addr. also combine with flash_<*>_method.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fix Compile error from Armclang compiler(AC6):
Error: L6218E: Undefined symbol arm_vectoraddrexcption (referred from arm_vectoraddrexcptn.o).
Signed-off-by: chao an <anchao@xiaomi.com>
undeclare TCGETS on esp32c3 when enable usbserial and termios
error:
chip/esp32c3_usbserial.c: In function 'esp32c3_ioctl':
chip/esp32c3_usbserial.c:411:10: error: 'TCGETS' undeclared (first use in this function)
Situation:
Assume we have 2 cpus, and busy run task0.
CPU0 CPU1
task0 -> task1 task2 -> task0
1. remove task0 form runninglist
2. take task1 as new tcb
3. add task0 to blocklist
4. clear spinlock
4.1 remove task2 form runninglist
4.2 take task0 as new tcb
4.3 add task2 to blocklist
4.4 use svc ISR swith to task0
4.5 crash
5. use svc ISR swith to task1
Fix:
Move clear spinlock to the end of svc ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
Add support for MCUBoot.
Two new configurations are added:
- mcuboot-loader: mcuboot-loader app used as a bootloader.
main_mcuboot_loader as entrypoint
- mcuboot-app: used as mcuboot agent app. Needs to be
signed manually through "imgtool sign --pad --align 4 -v 0 -s
auto -H 0x200 --pad-header -S 0xc0000 nuttx.hex nuttx_sign.bin"
Signed-off-by: Andres Sanchez <tito97_sp@hotmail.com>
This commit allows the PWM modules to be synchronized by an external
signal (other PWM module for example). The sync source can be selected
from configuration.
PWM module can also now generate a trigger when its timer reaches the duty
cycle. This trigger is used for the synchronization of other modules. It
can also be used for triggering ADC for example in the future.
Thanks to Rastislav Pavlanin and Jan Spurek from NXP support for
suggestion which helped to solve the inter-module PWM synchronization
task.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Simplify the clock mode from the board.h -files. Also make the
SD clock definable as well.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Some related products, such as Aries m100pfs, don't support eMMC
speeds up to 200MHz. Thus, provide option to select slower clock.
This has only to do with the clocking, no CMD6 is sent to select
high speed modes.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
The L3 mapping function was just way too simplistic. Depending on memory
configuration it either works or not.
Noticed that with icicle:pnsh the software crashes due to instruction
page fault, reason is the map_region() implementation that does not
work for regions that are not aligned to 2MB (the L2 page size).
Implemented an extremely simplistic page table allocator for the L3
references, that should once and for all get rid of the L3 mapping issue.
NOTE: gran_alloc() cannot be used at this point, it is too early for it.
