Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Juha Niskanen
802f146781
configs/nucleo-* and configs/stm32l476vg-disco: Fix more stm32_userleds.c bogus logic
2018-01-16 07:20:41 -06:00
Gregory Nutt
e761b80ea7
fs/vfs: file_read() is an internal OS interface and should not errors via the errno
2017-09-28 14:14:32 -06:00
Juha Niskanen
0a1da7eaca
configs: update STM32L4 configs for ADC changes
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2017-08-30 11:40:58 +03:00
Juha Niskanen
874947d7e5
STM32L4 TIM: TIM15,16,17 are always in APB2
2017-08-25 07:02:21 -06:00
Gregory Nutt
dc8f3778a9
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:26:53 -06:00
Gregory Nutt
2319ea53a9
STM32L4: Eliminate a warning about implicit definition of function. While we are at it, let's improve the naming a little too.
2017-07-22 09:53:29 -06:00
Gregory Nutt
7577dba2c3
Move remaining, unique Make.defs files into scripts directory.
2017-07-11 11:40:27 -06:00
Gregory Nutt
e40ccc1b60
Move remaining, unique Make.defs files into scripts directory.
2017-07-11 11:14:11 -06:00
Gregory Nutt
422888733b
More conversions of defconfig files to compressed format. Not yet finished.
2017-07-09 19:25:19 -06:00
Gregory Nutt
c67b807f43
configs/: Remove dangling spaces at the end of lines in *.c and *.h files.
2017-06-28 13:21:20 -06:00
Gregory Nutt
cd54a0340f
Fix a typo. And typo in Kconfig file is reflect in all defconfig files.
2017-06-15 14:29:09 -06:00
Gregory Nutt
b0fda33e13
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Juha Niskanen
1829282442
configs: add nucleo-l496zg board files
2017-05-02 07:36:09 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Sebastien Lorquet
aca2e36d67
stm32 devboards
2017-04-28 18:26:05 +02:00
Gregory Nutt
2e6908b384
IOCTLS. Separate wireless character driver IOCTL commands from wireless network driver IOCTL commands. Move from wireless.h to ioctl.h.
2017-04-27 16:58:30 -06:00
Gregory Nutt
2f9028b547
Remove all remaining references to setenv.h and setenv.bat.
2017-04-26 10:28:37 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
1620ff05f4
Remove all setenv.sh files.
2017-04-26 07:49:37 -06:00
Gregory Nutt
0652cbfd12
Update TODO list and README files.
2017-04-15 07:40:14 -06:00
Gregory Nutt
39b62c6b46
Changes from review of last PR
2017-04-13 06:50:33 -06:00
Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Sebastien Lorquet
28e74ec058
Nucleo L476RG: More naming fixes.
2017-03-29 07:16:27 -06:00
Sebastien Lorquet
db8b38f848
STM32 L4: More SPI clean-up. Lower case replacements.
2017-03-28 08:58:43 -06:00
Sebastien Lorquet
9221e15811
STM32 L4: Fix some bad naming in the SPI driver.
2017-03-28 07:28:55 -06:00
Gregory Nutt
c071e2a30c
Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads.
2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305
Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES
2017-03-27 09:08:14 -06:00
Gregory Nutt
3949ab38fd
configs/: Rename all stm32_wireless.c files to stm32_cc3000.c.
2017-03-24 18:05:44 -06:00
Gregory Nutt
c428661e18
apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.
2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5
Refresh all ARM configurations
2017-03-09 10:23:41 -06:00
Gregory Nutt
7a9a3bea2f
stm32_gpiosetevent: GPIO IRQ function should not return the xcpt_t oldhandler. This value is useful and potentially dangerous by itself after the change to assocaite a argument with the interrupt handler.
2017-03-02 18:36:14 -06:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Gregory Nutt
3129c7536e
CC3000: Add interrupt argument to all CC3000 interrupts.
2017-02-27 09:23:50 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
4539988d00
Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero().
2017-02-22 10:41:49 -06:00
Gregory Nutt
085616d651
STM32L4: Bring power management logic from Motrola MDK into NuttX
2017-02-18 10:18:42 -06:00
Gregory Nutt
3c4684ef5f
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
2017-01-20 09:30:07 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gregory Nutt
ee2852f5ff
Remove all references to board_adc_setup()
2016-12-05 17:06:08 -06:00
Gregory Nutt
55dd1c87b3
Remove all references to BOARDIOC_ADCSETUP
2016-12-05 15:31:40 -06:00
Gregory Nutt
4b216ff8dd
Finish removing traces of BOARDIOC_PWMSETUP
2016-12-05 14:56:21 -06:00
Gregory Nutt
b999e63c82
Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more.
2016-12-05 13:54:12 -06:00
