sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
48,621 Commits 1 Branch 0 Tags 291 MiB
b3c1c55805
Commit Graph

48621 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Xiang Xiao
b3c1c55805 net: Make si_bind callback optional 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Michal Lenc
f97d93903c samv7: add support for dead time delay to PWM driver 
This commit adds support for dead time delay to SAMv7 PWM driver. The
dead time can be used to delay an active PWM output at the begining
of the period. This can be used for H bridge control for example.

The values are to be set from the application level. It is required
to allow config option PWM_DEADTIME in order to support dead time delay.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-07 01:30:01 +08:00
Michal Lenc
88f3d89920 pwm: add configuration option for dead time generators 
PWM drivers usually supports dead time generators that automatically
insert output activation delay for complementary PWM outputs. This
is usefull for some control purposes as control of H bridge for example.

This commit adds an application to driver interface that can be used
to set up those delays (if supported by the selected architecture)
directly from the application. The set up remains the same as for duty
cycle value.

The whole addition is by default disabled. It can be enabled by config
option PWM_DEADTIME.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-07 01:30:01 +08:00
chao an
b48f9d9b96 arch/arm: correct ARCH_HAVE_DSP to ARM_HAVE_DSP 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-07 01:27:28 +08:00
Karel Kočí
eab9e688d8 samv7: switch from printing numbers as signed to unsigned in QSPI 
This switches from PRId32 to PRIu32. Those variables have unsigned type
and thus we should print them as such.
 2023-03-06 18:51:50 +02:00
Michal Lenc
4084c749c8 Documentation: add initial documentation page for SAMv7 MCU 
Initial documentation page for SAMv7 MCU is added. There are still
board pages to be added in the future.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-06 23:37:57 +08:00
TimJTi
94f0283bdd Correct DEBUGASSERT code error, _err format error, better C89 compatability 
Update drivers/power/supply/act8945a.c

Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-06 17:25:39 +02:00
jturnsek
4c2edece50 Adding support for LS027B7DH01A display and MEMLCD_EXTCOMIN_MODE_HW 2023-03-06 16:23:15 +02:00
chao an
34a032b486 arm/armv8-m: add missing zig flags 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-06 10:54:08 -03:00
Zhe Weng
7111d23ae4 net/arp: Only parse ioctl request for valid cmd. 
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-03-06 10:51:12 -03:00
Huang Qi
aba0a25524 ubsan: Implement __ubsan_handle_invalid_builtin 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-06 13:43:08 +02:00
Xiang Xiao
9308a72419 vfs/poll: Remove the unused ptr field from pollfd 
forget in the commit:
commit 0a95c7721b
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date:   Fri Nov 11 03:47:07 2022 +0800

    vfs/poll: Remove POLLFILE and POLLSOCK NuttX specific extension

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 13:19:42 +02:00
Masayuki Ishikawa
1917870cca boards: stm32f4discovery: Update kostest/defconfig to avoid crash 
Summary:
- I noticed that recent mm_heap changes causes a crash with
  stm32f4discovery:kostest
- This is a tentative solution to avoid the crash

Impact:
- None

Testing:
- Tested with stm32f4discovery board

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2023-03-06 11:28:36 +01:00
Huang Qi
bcf5700e8a tools/arm: Add missing -mcpu param for zig 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-06 11:27:53 +01:00
wangbowen6
3e971d2e6d mm_heap: double malloced memory default alignment (4 -> 8, 8 -> 16) 
Base on the gnu libc standard:
https://www.gnu.org/software/libc/manual/html_node/Aligned-Memory-Blocks.html

Change the default memory aligment to 8 bytes for 32-bit system and
16 bytes for 64-bit system.

Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
 2023-03-06 11:27:43 +01:00
wangbowen6
70083168f1 mm: support custom the mm alignment and default to be 8 
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
 2023-03-06 11:10:36 +08:00
jturnsek
97b4900c59 Bug fixes and improved interrupt support for mcp23x17 driver 2023-03-06 08:40:33 +08:00
raiden00pl
468f2e3222 boards/nrf5340-dk: add sdc support 2023-03-05 19:31:07 -03:00
raiden00pl
9dc8f27dda arch/nrf53: add SoftDevice support 2023-03-05 19:31:07 -03:00
raiden00pl
5fd321e54d arch/nrf53: add systimer configuration 2023-03-05 19:31:07 -03:00
raiden00pl
3b92819792 arch/nrf53: initial clock configuration 2023-03-05 19:31:07 -03:00
raiden00pl
15a932f8e1 arch/nrf53: add more registers definitions 2023-03-05 19:31:07 -03:00
raiden00pl
e3f2443fc3 boards/nrf52: normalize sdc configurations 2023-03-05 21:32:11 +02:00
raiden00pl
242606a7d9 arch/nrf52/nrf52_sdc: fix memory configuration for MULTIROLE 2023-03-05 21:32:11 +02:00
raiden00pl
238b606057 arch/nrf52: fix configuration for SoftDevice, LFCLK is required but it doesn't have to be XTAL 2023-03-05 21:32:11 +02:00
raiden00pl
cf5cd222d6 Revert "arch/nrf52/Kconfig: update comment about SoftDevice used PPI channels" 
This reverts commit 688d2bb820.

It's not clear how many PPI channels is required.
Let's assume the worst case scenario, which is the previous version.
 2023-03-05 21:32:11 +02:00
Bernd Walter
5ca9adbe61 Copy I2C_M_NOSTART support from sam7v/sam_twihs.c driver 2023-03-06 01:39:21 +08:00
raiden00pl
c4c2b14623 tools/nxstyle: add 'IRQn_Type' to whitelists 2023-03-05 17:56:37 +02:00
Huang Qi
e7bf464c7a arch/imx6: Fix a compilation error with UBSan 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-05 11:06:48 +02:00
qinwei1
e3f0f86514 arm64: add arm64_serialinit/arm64_earlyserialinit 
Summary:

   add arm64_serialinit/arm64_earlyserialinit function prototype
to arm64_internal.h as common function for arm64 based chip.
   Testing with ostest in SP and SMP

Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
 2023-03-05 09:44:51 +08:00
Tiago Medicci Serrano
a3badd26a0 drivers/serial: Echo CR if NL is detected if console 
Echoing console's input is now performed by the serial driver
(https://github.com/apache/nuttx/pull/8691). In order to keep old
behavior of CR being echoed by the device, it's needed to detected
whenever NL is being echoed and send CR before sending it.
 2023-03-05 09:44:26 +08:00
raiden00pl
99b0bad94e arch/armv8-m: DSP extension is optional 2023-03-05 09:43:52 +08:00
qinwei1
e696e99d9a arm64: Update readme.txt for FVP platform 
Summary:

   Updating Readme.TXT for FVP platform.

Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
 2023-03-05 01:56:17 +08:00
Michal Lenc
1d88bceb79 samv7: raise input flow control warning only for serial drivers 
Hardware flow control for serial requires the usage of DMAC channels
which is not yet supported for SAMv7 MCU. However the same config option
CONFIG_SERIAL_IFLOWCONTROL is also used for USB CDC/ACM flow control which
works well. Therefore the warning message should be raised only if
flow control is configured for USART driver and not for USB CDC/ACM.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-04 23:22:00 +08:00
raiden00pl
84d8b821e0 armv8-m/arm_ramvec_initialize.c: fix printf warning 2023-03-04 22:33:53 +08:00
raiden00pl
342fb22c3f arch/nrf52/.gitignore: clean up after SoftDevice update 2023-03-04 22:33:53 +08:00
raiden00pl
688d2bb820 arch/nrf52/Kconfig: update comment about SoftDevice used PPI channels 2023-03-04 22:33:53 +08:00
raiden00pl
bac798af07 arch/nrf52/sdc: remove no more needed core_cm4.h 2023-03-04 22:33:53 +08:00
Xiang Xiao
454921eac7 arch/boards: Rename up_lowputc to [arm64|renesas]_lowputc 
follow other arch coding style

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-04 11:08:00 +02:00
yinshengkai
da4e2671f5 trace: Add kernel tracepoint support 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-03-04 12:57:48 +08:00
Gustavo Henrique Nihei
312d6223d3 xtensa: Remove non-supported options from CPUs' specs 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2023-03-04 12:56:58 +08:00
Gustavo Henrique Nihei
bf9951f939 xtensa/esp32: Move attribution to CMN_ASRCS to common makefile 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2023-03-04 12:56:58 +08:00
raiden00pl
5fa2dc3c5b nrf5340-dk/nsh_cpunet: add net core configuration 2023-03-04 12:35:14 +09:00
raiden00pl
2ec564eb11 boards/nrf53/nsh_cpuapp: fix ram size 2023-03-04 12:35:14 +09:00
raiden00pl
49446c8e76 arch/nrf53: support for APPROTECT, and disable it at default for now 2023-03-04 12:35:14 +09:00
raiden00pl
ad4af9b9c9 arch/nrf53: boot the net core 2023-03-04 12:35:14 +09:00
raiden00pl
150b3622a8 arch/nrf53_gpio: add interface to assign GPIO to the net core 2023-03-04 12:35:14 +09:00
raiden00pl
e3008e13f3 arch/nrf53_gpio: MCUSEL is available only for the app core 2023-03-04 12:35:14 +09:00
raiden00pl
7cbaa98d88 nrf52/nrf53_serial: remove redundant include 2023-03-04 12:35:14 +09:00
raiden00pl
d58753725e arch/nrf53: add initial register definitions for CTRL-AP, RESET and UICR 2023-03-04 12:35:14 +09:00