sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
48,865 Commits 1 Branch 0 Tags 291 MiB
b6e92fa16d
Commit Graph

48865 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Michal Lenc
0797b03c08 mmcsd: add nxsig_usleep delay after MMC_CMD1 command 
MMC_CMD1 command is used to check whether card is MMC type (checked if
CONFIG_MMCSD_MMCSUPPORT is enabled). This commit inserts nxsig_usleep
wait if this check fails. This is to ensure the communication recovers
from invalid response as this may take some time on some platforms (
samv7 for example). Following command for SDHC check may fail if sleep
is not used.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-13 22:22:54 +02:00
Huang Qi
061e98aa98 drivers/serial: Fix wrong ECHO flag 
There is a rookie mistake introduced by https://github.com/apache/nuttx/pull/8691,
ECHO flag is a part of Local Mode (c_lflags) instead of c_iflags.

nuttx-apps should do the same change in nsh_login and termcurse_vt100.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-13 16:29:36 -03:00
raiden00pl
74158db707 arch/nrf52/nrf52_adc.c: fix device shutdown 2023-03-13 16:25:47 -03:00
zhangyuan21
12bb4f04f1 arch: fixed error in the calculation of nwords caused an out of bounds 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-03-13 16:12:11 +09:00
raiden00pl
a581b99266 nrf5340-dk: add sdc net core examples 2023-03-12 16:01:04 +02:00
zouboan
474bcedbd4 sensor/mpu60x0: Fix some error bit and width macro 2023-03-12 15:59:56 +02:00
raiden00pl
b9fd059914 drivers/bluetooth: bth4 depends on bluetooth definitions 2023-03-11 20:30:25 -03:00
Michal Lenc
c4d8bbd190 pwm.h: add comment regarding possible channel numbers 
PWM drivers use channel numbers 0 and -1 to skip the channel and/or
all following channels. This situation is well established in the drivers
however it was not mentioned in pwm.h file. This commit adds a comment
mentioning it.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-11 11:37:04 +01:00
Tiago Medicci Serrano
40319b9c4c esp32s3/wifi: move Wi-Fi-related build recipe to a separate file 2023-03-10 10:59:14 +02:00
Tiago Medicci Serrano
8f2cdc4e60 esp32s3/wifi: add support for Wi-Fi (Station mode) 
1) Wi-Fi driver libs from Espressif ESP-IDF release/v5.0;
2) Station mode only;
3) WPA2-PSK and WPA3-SAE enabled;

Not yet supported (WIP):
- SoftAP mode;
- 802.11k, 802.11v and 802.11R;
- Power Save mode;
- BLE Coexistance;
 2023-03-10 10:59:14 +02:00
Tiago Medicci Serrano
1fc73087da esp32s3: add reset/shutdown handler to run registered callbacks 2023-03-10 10:59:14 +02:00
dongjiuzhu1
f8b27d9fbe fs/mmap: try rammap when filesystem mmap don't support 
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
 2023-03-10 10:43:33 +02:00
Zhe Weng
7b0d80c94a net/icmpv6: align structs to 2 bytes. 
Fix following misaligned errors:

icmpv6/icmpv6_radvertise.c:145:21: runtime error: member access within misaligned address 0x573da9e6 for type 'struct icmpv6_router_advertise_s', which requires 4 byte alignment
0x573da9e6: note: pointer points here
 00 00 00 01 85 00  d6 14 00 00 00 00 01 01  12 8c 25 08 9c f8 04 00  00 00 ff 02 00 00 00 00  00 00
             ^
icmpv6/icmpv6_radvertise.c:167:21: runtime error: member access within misaligned address 0x573da9fe for type 'struct icmpv6_mtu_s', which requires 4 byte alignment
0x573da9fe: note: pointer points here
 af 78 ab 72 00 00  00 00 00 00 00 01 ff 00  00 01 04 00 00 00 ff 02  00 00 00 00 00 00 00 00  00 01
             ^
icmpv6/icmpv6_radvertise.c:176:23: runtime error: member access within misaligned address 0x573daa06 for type 'struct icmpv6_prefixinfo_s', which requires 4 byte alignment
0x573daa06: note: pointer points here
 00 00 05 dc ff 00  00 01 04 00 00 00 ff 02  00 00 00 00 00 00 00 00  00 01 ff 08 9c f8 04 00  00 00
             ^

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-03-10 09:41:02 +01:00
Petro Karashchenko
61e996af33 drivers/usbmisc: remove redundant scope in switch/case 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-09 16:27:07 -03:00
Petro Karashchenko
ab196aebe4 include/nuttx/mm: remove FAR from non-pointer types 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-09 16:27:07 -03:00
Petro Karashchenko
9b72ad4f7d arch/arm/sama5: switch from spaces to TABs in Kconfig 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-09 16:27:07 -03:00
Petro Karashchenko
4581a84064 nuttx: fix indentation issue 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-09 16:27:07 -03:00
Xiang Xiao
75ecbd4382 net/local: Return the unblock handle correctly in local_accept 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-09 09:17:19 +01:00
raiden00pl
12cc49df57 boards/nrf5340-dk: add support for rptun 2023-03-09 14:21:42 +08:00
raiden00pl
1a0aecb0ce arch/nrf53: initial support for rptun 2023-03-09 14:21:42 +08:00
Zhihong Chen
8f74ce8ac4 boards:riscv:hpm6750evk2: revised README.txt to config toolchain 
- use hpmicro GNU riscv32 toolchain

Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com>
 2023-03-09 07:56:00 +02:00
Zhihong Chen
698f5f3e80 arch/riscv/Toolchain: add riscv32-unknown-elf selection 
- user can use menuconfig to select riscv64-unknown-elf or riscv32-unknown-elf

Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com>
 2023-03-09 07:56:00 +02:00
Zhe Weng
0e018308a3 net/pkt: Add readahead queue for pkt, call input for tx on sim 
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-03-08 23:09:25 +02:00
Zhe Weng
cd1decf4a5 mm/iob: Support neg offset in iob_clone 
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-03-08 23:09:25 +02:00
raiden00pl
fb861c0a29 arch/nrf53: add more register definitions (ported from nrf52) and some cosmetics for nrf52 2023-03-09 03:59:57 +08:00
Gonzalo Aterido
6cb649ecf6 Fix unwanted flush in the SPI slave driver 2023-03-09 03:53:35 +08:00
Gustavo Henrique Nihei
1f54c024da espressif: Fix download of IDFboot binaries 
It was broken after #8759, which erroneously substituted with MCUboot

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2023-03-08 15:55:35 -03:00
Huang Qi
cfe6c4be8e driver/serial: Only enable tx interrupt if tx buffer is not empty 
Fix https://github.com/apache/nuttx/issues/8731

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-08 16:02:56 +02:00
Ville Juven
47ce89f757 Revert "signal/sig_dispatch: Signal action was not performed if TCB_FLAG_SYSCALL is set" 
This reverts commit 0e44666828.
 2023-03-08 10:13:26 +01:00
Ville Juven
3f529b4882 Revert "signal/sig_dispatch: Fix case where signal action is sent twice" 
This reverts commit be0cb4cbe3.
 2023-03-08 10:13:26 +01:00
Karel Kočí
62661600b2 treewide: add DOWNLOAD variable as unification of curl call 
This is a followup to the commit
03b164f59c.
 2023-03-08 17:05:05 +08:00
yinshengkai
81a4f21f1b libc/libvsprintf: use puts to replace the putc 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-03-08 16:56:17 +08:00
Huang Qi
64e611d71e driver/uart_rpmsg: Passthrough data by default 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-08 16:39:17 +08:00
Lucas Saavedra Vaz
35f830b19a boards: Add CoreMark config to ESP boards 2023-03-08 13:11:13 +08:00
Lucas Saavedra Vaz
e53200dde7 boards/sim/wamr: Remove LIBC_FLOATINGPOINT (now selected by the app) 2023-03-08 13:09:34 +08:00
Alin Jerpelea
bd470ea94d AUTHORS: add Tomek CEDRO to the list 
Tomek CEDRO has submitted the ICLA and should be added to the list

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2023-03-07 14:15:55 +01:00
Xiang Xiao
9f4a15110c net: Finish FIONBIO default action if si_ioctl return OK 
Continue the work: https://github.com/apache/nuttx/pull/6976

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-07 11:34:35 +02:00
chao an
815f40c8f1 armv8-m/cortex-m85: add support of PACBTI(Authentication and Branch Target Identification Extension) 
Reference:
https://developer.arm.com/documentation/100748/0617/Security-features-supported-in-Arm-Compiler-for-Embedded/PACBTI-M-extension-mitigations-against-ROP-and-JOP-style-attacks
https://developer.arm.com/documentation/101754/0619/armclang-Reference/armclang-Command-line-Options/-mbranch-protection

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-07 07:34:05 +02:00
Xiang Xiao
3c3dea5d7a net: Make si_poll callback optional 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Xiang Xiao
c39be172da net: Make si_accept callback optional 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Xiang Xiao
5dd037c599 net: Make si_connect callback optional 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Xiang Xiao
a97e2523a4 net: Make si_listen callback optional 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Xiang Xiao
2553b7701c net: Remove the empty si_getpeername implementation 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Xiang Xiao
9b3715050b net: Make si_getsockname callback optional 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Xiang Xiao
b3c1c55805 net: Make si_bind callback optional 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-06 20:58:27 +02:00
Michal Lenc
f97d93903c samv7: add support for dead time delay to PWM driver 
This commit adds support for dead time delay to SAMv7 PWM driver. The
dead time can be used to delay an active PWM output at the begining
of the period. This can be used for H bridge control for example.

The values are to be set from the application level. It is required
to allow config option PWM_DEADTIME in order to support dead time delay.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-07 01:30:01 +08:00
Michal Lenc
88f3d89920 pwm: add configuration option for dead time generators 
PWM drivers usually supports dead time generators that automatically
insert output activation delay for complementary PWM outputs. This
is usefull for some control purposes as control of H bridge for example.

This commit adds an application to driver interface that can be used
to set up those delays (if supported by the selected architecture)
directly from the application. The set up remains the same as for duty
cycle value.

The whole addition is by default disabled. It can be enabled by config
option PWM_DEADTIME.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-07 01:30:01 +08:00
chao an
b48f9d9b96 arch/arm: correct ARCH_HAVE_DSP to ARM_HAVE_DSP 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-07 01:27:28 +08:00
Karel Kočí
eab9e688d8 samv7: switch from printing numbers as signed to unsigned in QSPI 
This switches from PRId32 to PRIu32. Those variables have unsigned type
and thus we should print them as such.
 2023-03-06 18:51:50 +02:00
Michal Lenc
4084c749c8 Documentation: add initial documentation page for SAMv7 MCU 
Initial documentation page for SAMv7 MCU is added. There are still
board pages to be added in the future.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-06 23:37:57 +08:00